WA 72 A/C cab for cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 12-01-2016, 10:37 PM

Starting at $35 per cut plus shipping. Has clean roof inner and outer. Back window pinchweld has some pinholes. Nice firewall. Nice cab corners, etc. I have uncut a/c and non a/c dashes if needed, this one is spoken for. Let me know what you need...

CheyenneSuper72 · 12-01-2016, 11:45 PM

What do you get for a dash? A/C.

**JJorgensen52** · 12-02-2016, 02:14 AM

Cost for the firewall section to convert a non-AC to AC? Shipping to 23438. Thanks.

Toms67 · 12-02-2016, 06:26 AM

Need driver side upper roof around sunvisor two windshield. Picture attached. Let me know how much for shipping. Thank you.

*randy500* · 12-02-2016, 11:21 AM

Quote:

Originally Posted by Toms67

Need driver side upper roof around sunvisor two windshield. Picture attached. Let me know how much for shipping. Thank you.

Shipping is $21 to zip code 13685, with my estimate of size of 24 x 10 x 6 and 9 pounds billable weight...

*randy500* · 12-02-2016, 11:24 AM

Quote:

Originally Posted by JJorgensen52

Cost for the firewall section to convert a non-AC to AC? Shipping to 23438. Thanks.

Shipping is $21 with size of 26 x 14 x 4 and billable weight of 9 pounds.

Toms67 · 12-02-2016, 12:24 PM

OK sounds good. Can you PM me PayPal information? Thank you.

*randy500* · 12-02-2016, 02:07 PM

Quote:

Originally Posted by Toms67

OK sounds good. Can you PM me PayPal information? Thank you.

Sending PM now

**JJorgensen52** · 12-02-2016, 11:31 PM

Quote:

Originally Posted by randy500

Shipping is $21 with size of 26 x 14 x 4 and billable weight of 9 pounds.

Works for me. If you can PM me your paypal / total, I'll send it on over

*randy500* · 12-02-2016, 11:51 PM

Quote:

Originally Posted by JJorgensen52

Works for me. If you can PM me your paypal / total, I'll send it on over

Sending PM now.

*randy500* · 12-02-2016, 10:56 AM

Quote:

Originally Posted by CheyenneSuper72

What do you get for a dash? A/C.

$100 for the dash, they have been unbolted on the side and cut at the pinch weld on the outside so you would have the full inner dash to the pinch weld. I shipped one to Texas and think it was about $40 or so.

Better estimate to Dallas zip 75201, size 62 x 14 x 11 with billable weight of 58 pounds is $58.25

*randy500* · 12-02-2016, 11:57 PM

Ok, one cut made and sent. Another getting cut tomorrow, anybody else need a piece...trying to pay for the saw...

garypr1 · 12-03-2016, 02:05 PM

Hi Randy. Can you post a pic of the dash cut at the pinch weld?
Thanks!

*randy500* · 12-03-2016, 04:02 PM

Quote:

Originally Posted by garypr1

Hi Randy. Can you post a pic of the dash cut at the pinch weld?
Thanks!

Here is an example...I have non A/C too removed similarly. Cut on firewall side of the pinchweld with an air chisel.

**68bowtie** · 12-03-2016, 02:30 PM

do you have what i need to repair these "wings" on the back of cab that the PO notched for exhaust? if in good shape, pictures and price shipped to 95382 please.

Name: IMG_3334.jpg
Views: 318
Size: 34.8 KB

Name: IMG_3334.jpg
Views: 318
Size: 34.8 KB

**68bowtie** · 12-03-2016, 02:32 PM

the other side...

Name: IMG_3335.jpg
Views: 345
Size: 31.2 KB

*randy500* · 12-03-2016, 04:07 PM

Quote:

Originally Posted by 68bowtie

the other side...

Attachment 1596051

I can cut both sides and ship to you for $55, $35 for the cuts and $20 for the shipping...send funds to randy501@outlook.com and I will cut and ship by Monday. Make a note in paypal if you will about what you are buying, I will post tracking info in paypal too.

BTW, that's a weird place to put exhaust.....

Gawdly · 12-03-2016, 06:17 PM

Happen to have another AC Firewall section?

*randy500* · 12-03-2016, 06:43 PM

Quote:

Originally Posted by Gawdly

Happen to have another AC Firewall section?

I do have another one that I use for a template. Do you need it right away? I am also waiting on payment on the orange one still.

Gawdly · 12-03-2016, 08:42 PM

Quote:

Originally Posted by randy500

I do have another one that I use for a template. Do you need it right away? I am also waiting on payment on the orange one still.

Don't need it immediately no. Just want to get one here so I can quit looking and know it's ready when I am.
Posted via Mobile Device

**68bowtie** · 12-03-2016, 06:43 PM

Quote:

Originally Posted by randy500

I can cut both sides and ship to you for $55, $35 for the cuts and $20 for the shipping...send funds to randy501@outlook.com and I will cut and ship by Monday. Make a note in paypal if you will about what you are buying, I will post tracking info in paypal too.

BTW, that's a weird place to put exhaust.....

tell me about it...

can you post some pictures of each side?

*randy500* · 12-03-2016, 07:05 PM

Quote:

Originally Posted by 68bowtie

tell me about it...

can you post some pictures of each side?

Not as weird as I have seen...I was in Germany in the military and needed exhaust for my 72 6cyl shorty with headers, found a US base with a exhaust bender, drove 100 miles or so there then they guy proceeded to route my dual exhaust from the drivers side all the way to the passenger side outside the frame rail with 2 mufflers under the bed and rear exit tailpipes...weirdest exhaust you have ever seen...that exhaust didn't last long and got redone! No cab cuts though!

Here is the pics, the cab is clean and straight in that area, one screw hole in the left side shown in the picture.

718jwh · 12-03-2016, 08:00 PM

If you don't sell the RH side cab corner I could use one, if it's nice

Thanks
John

**68bowtie** · 12-03-2016, 09:32 PM

if 718 can't use the corners if i buy the wing portion, then he can have them. i need them but not going to install them for a while so i can always look elsewhere...

cjrolke · 12-05-2016, 10:48 AM

I am looking for a section of roof towards the middle of the truck cab say 4" back and 16" long
see attached picture

shipped to 45140
thanks

12-01-2016, 10:37 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	72 A/C cab for cuts Starting at $35 per cut plus shipping. Has clean roof inner and outer. Back window pinchweld has some pinholes. Nice firewall. Nice cab corners, etc. I have uncut a/c and non a/c dashes if needed, this one is spoken for. Let me know what you need... Attached Images

12-01-2016, 11:45 PM	#2
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: 72 A/C cab for cuts What do you get for a dash? A/C.

12-02-2016, 02:14 AM	#3
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: 72 A/C cab for cuts Cost for the firewall section to convert a non-AC to AC? Shipping to 23438. Thanks. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) Last edited by JJorgensen52; 12-02-2016 at 02:21 AM.

12-02-2016, 06:26 AM	#4
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: 72 A/C cab for cuts Need driver side upper roof around sunvisor two windshield. Picture attached. Let me know how much for shipping. Thank you. Attached Images

12-02-2016, 12:24 PM	#7
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: 72 A/C cab for cuts OK sounds good. Can you PM me PayPal information? Thank you.

12-02-2016, 11:57 PM	#12
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 A/C cab for cuts Ok, one cut made and sent. Another getting cut tomorrow, anybody else need a piece...trying to pay for the saw... Attached Images

12-03-2016, 02:05 PM	#13
garypr1 1972 Cheyenne Super SWB Join Date: Jul 2007 Location: Pleasanton, Ca Posts: 47	Re: 72 A/C cab for cuts Hi Randy. Can you post a pic of the dash cut at the pinch weld? Thanks! __________________ 72 Cheyenne Super SWB 66 Corvette 427/390 05 Corvette Z51 (sold)

12-03-2016, 02:30 PM	#15
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,808	Re: 72 A/C cab for cuts do you have what i need to repair these "wings" on the back of cab that the PO notched for exhaust? if in good shape, pictures and price shipped to 95382 please. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Thank you all so far you are angels!! Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

12-03-2016, 02:32 PM	#16
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,808	Re: 72 A/C cab for cuts the other side... __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Thank you all so far you are angels!! Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

12-03-2016, 06:17 PM	#18
Gawdly Registered User Join Date: Jun 2010 Location: Boise, ID Posts: 115	Re: 72 A/C cab for cuts Happen to have another AC Firewall section?

12-03-2016, 08:00 PM	#23
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: 72 A/C cab for cuts If you don't sell the RH side cab corner I could use one, if it's nice Thanks John

12-03-2016, 09:32 PM	#24
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,808	Re: 72 A/C cab for cuts if 718 can't use the corners if i buy the wing portion, then he can have them. i need them but not going to install them for a while so i can always look elsewhere... __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Thank you all so far you are angels!! Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

12-05-2016, 10:48 AM	#25
cjrolke Registered User Join Date: Apr 2016 Location: cincinnati oh Posts: 60	Re: 72 A/C cab for cuts I am looking for a section of roof towards the middle of the truck cab say 4" back and 16" long see attached picture shipped to 45140 thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.