Door Panel idea - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vht · 01-10-2017, 04:37 PM

I seen in the $50 budget thread where someone painted their door panels with bed liner, I think it was Rustoleum. I was going to dye mine, they are in decent shape but they are worn smooth in places, like on top. Could I go over them with say gray bed liner and then shoot them in the blue dye? Just thinking that would make them more uniform all over. I really liked the looks of theirs, I just need blue color. Didn't know if I'd have some kinda reaction or not.

ultrahd4me · 01-10-2017, 05:10 PM

Here's a set I've done recently with SEM texture spray and SEM dye. Just strip any old dye off, clean 2-3 times, then 2-3 more times, dry overnight and then your ready. I did 3-4 coats of texture spray in opposite directions, then 5-6 coats of dye. Here's a before and after. I hope this helps and its cheaper than $50.

TrailerTrash · 01-10-2017, 05:52 PM

wow dude those look GREAT!

**TKCR** · 01-10-2017, 10:21 PM

Quote:

Originally Posted by ultrahd4me

Here's a set I've done recently with SEM texture spray and SEM dye. Just strip any old dye off, clean 2-3 times, then 2-3 more times, dry overnight and then your ready. I did 3-4 coats of texture spray in opposite directions, then 5-6 coats of dye. Here's a before and after. I hope this helps and its cheaper than $50.

Dang, those pics outside make those panels look even better!! They look BRAND NEW!!!

vht · 01-10-2017, 10:44 PM

You still got them? My truck had them, well it still has 1 but it's shot. It also had the carpet panels below the dr panels. I want to get them later.

**TKCR** · 01-10-2017, 11:25 PM

Quote:

Originally Posted by vht

You still got them? My truck had them, well it still has 1 but it's shot. It also had the carpet panels below the dr panels. I want to get them later.

No, I sold them on EBay. That's where I got them at. I thought about dyeing them, but I wasn't sure if they would turn out. After seeing the earlier post, I wish I had at the least tried.

**TKCR** · 01-10-2017, 11:30 PM

https://www.ebay.com/itm/142231534232

Here's a set on eBay.

vht · 01-10-2017, 05:59 PM

They look real good. Where did you get the pouches with the flip latch or whatever it's called?

**TKCR** · 01-10-2017, 10:18 PM

Quote:

Originally Posted by vht

They look real good. Where did you get the pouches with the flip latch or whatever it's called?

The flip cover pouches come off of Suburbans. I had a gray set, I was hoping to use, but they color of grey was too light.

77shorty · 01-11-2017, 07:52 PM

Looking reeeeaaaalllllyyyy nice there....SEM is good product!

01-10-2017, 04:37 PM	#1
vht Registered User Join Date: Jun 2013 Location: Brooksville Ky Posts: 531	Door Panel idea I seen in the $50 budget thread where someone painted their door panels with bed liner, I think it was Rustoleum. I was going to dye mine, they are in decent shape but they are worn smooth in places, like on top. Could I go over them with say gray bed liner and then shoot them in the blue dye? Just thinking that would make them more uniform all over. I really liked the looks of theirs, I just need blue color. Didn't know if I'd have some kinda reaction or not.

01-10-2017, 05:10 PM	#2
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: Door Panel idea Here's a set I've done recently with SEM texture spray and SEM dye. Just strip any old dye off, clean 2-3 times, then 2-3 more times, dry overnight and then your ready. I did 3-4 coats of texture spray in opposite directions, then 5-6 coats of dye. Here's a before and after. I hope this helps and its cheaper than $50. Attached Images __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

01-10-2017, 05:52 PM	#3
TrailerTrash Registered User Join Date: Jun 2015 Location: PA Posts: 441	Re: Door Panel idea wow dude those look GREAT! __________________ - When the Reaper makes his deal, trust in your steel - '77 C10 350/350 2/4 drop and a mild street engine

01-10-2017, 10:44 PM	#5
vht Registered User Join Date: Jun 2013 Location: Brooksville Ky Posts: 531	Re: Door Panel idea You still got them? My truck had them, well it still has 1 but it's shot. It also had the carpet panels below the dr panels. I want to get them later.

01-10-2017, 11:30 PM	#7
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Door Panel idea https://www.ebay.com/itm/142231534232 Here's a set on eBay. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-10-2017, 05:59 PM	#8
vht Registered User Join Date: Jun 2013 Location: Brooksville Ky Posts: 531	Re: Door Panel idea They look real good. Where did you get the pouches with the flip latch or whatever it's called?

01-11-2017, 07:52 PM	#10
77shorty Registered User Join Date: Apr 2015 Location: Portland, Or Posts: 100	Re: Door Panel idea Looking reeeeaaaalllllyyyy nice there....SEM is good product!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.