CA Cutting up a couple 65 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-24-2017, 12:37 PM

Not much here, but selling patches starting at $30 plus shipping. Any other parts please ask. These trucks are going to the scrap yard at the end of the week.
Thanks,
Ray

KrazyRay · 01-24-2017, 12:40 PM

2222

LostMy65 · 01-24-2017, 12:41 PM

You're scrapping a 4x4?

KVB · 01-24-2017, 01:59 PM

I am interested in the parking brake / e-brake cross member and hardware in the first truck, and the transmission high hump front piece in the second truck if it is complete.

KVB · 01-24-2017, 02:08 PM

Pm sent.

Gonna pass on the high hump front piece.

bill2509 · 01-24-2017, 04:07 PM

I would be interested in the inner fenders if they are in good condition and you are willing to ship to 74017 Thanks.

1960chevypanel · 01-24-2017, 05:41 PM

How much for the second truck as is?

pimpston65 · 01-24-2017, 06:50 PM

is this a steering damper or part of powersteering? if ps i'll take all the parts

KrazyRay · 01-24-2017, 07:42 PM

I will be getting to these in the next couple days and have answers. The 2nd truck is a 2wd that was converted to 4wd using 73-87 4x4 parts. They did an UGLY job on the conversion.
Thanks

**Backpayne** · 01-24-2017, 09:37 PM

Firewall part of high hump?

Short 3/4 · 01-24-2017, 11:00 PM

Looking for pass side 292 frame to motor mount perch for a 4x4

1960chevypanel · 01-25-2017, 12:50 AM

Price on rear end in 2WD truck?

**aotte1** · 01-25-2017, 01:33 AM

Ray,

I will take the lower radiator supports if four core, an what condition is the core support?

Thanks,
Les

sjsmo · 01-25-2017, 09:24 PM

looking for the park brake handle and mounting bracket....

65TRUK · 01-25-2017, 11:38 PM

Looking for 2WD Parking Brake Actuating Lever and Parking Brake Actuating Rod and Anti-rattle Spring for both sides. (You probably know this, but the parts I'm after are inside the rear drums. Thought I had them, but nope .... so I have to locate some.) Should also mention that I don't know how the Parking Brake Actuating Lever attaches to the brake shoe .. so I'd like that connecting bolt or pin or whatever.) Thanks,

KrazyRay · 01-26-2017, 11:02 AM

I'm spending today working on these trucks.
The e brake crossmember looks good $65 shipped
I will get a better look at the inner fenders when I pull the front off. The high hump firewall looks good $75 shipped.
The 2wd front suspension and rear axle are sold locally. The radiator core support looks rough on the one and I will take a close look at the other. I will check the shelf for drum springs and hardware. I will post more pictures. Thanks!

KVB · 01-26-2017, 02:21 PM

PM Sent.

KVB · 01-26-2017, 08:40 PM

Would you have any heater control knobs?

KrazyRay · 01-27-2017, 01:38 AM

The radiator core supports and inner fenders are bad.
e brake handle with bracket...$38 shipped
e brake crossmember... $65 shipped to lower 48. Canada extra
high hump firewall...$75 shipped

Here's some pictures:

KrazyRay · 01-27-2017, 01:43 AM

2222

KrazyRay · 01-27-2017, 01:47 AM

3333

KVB · 01-27-2017, 08:36 AM

Pm sent.

Isaiah92260 · 01-27-2017, 11:44 AM

Do you have the fenders and front grille support? Let me know please

dkerr · 11-19-2017, 06:28 AM

Are the e brake stuff still available?

automoto · 01-27-2017, 02:37 PM

do you have the passenger side fresh air vent assembly or even just the vent door/handle?

01-24-2017, 12:37 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Cutting up a couple 65 trucks Not much here, but selling patches starting at $30 plus shipping. Any other parts please ask. These trucks are going to the scrap yard at the end of the week. Thanks, Ray Attached Images

01-24-2017, 12:40 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks 2222 Attached Images

01-24-2017, 12:41 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Cutting up a couple 65 trucks You're scrapping a 4x4? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-24-2017, 01:59 PM	#4
KVB Registered User Join Date: Oct 2010 Location: La Prairie, Quebec Posts: 231	Re: Cutting up a couple 65 trucks I am interested in the parking brake / e-brake cross member and hardware in the first truck, and the transmission high hump front piece in the second truck if it is complete.

01-24-2017, 02:08 PM	#5
KVB Registered User Join Date: Oct 2010 Location: La Prairie, Quebec Posts: 231	Re: Cutting up a couple 65 trucks Pm sent. Gonna pass on the high hump front piece.

01-24-2017, 04:07 PM	#6
bill2509 Registered User Join Date: Jan 2010 Location: Tulsa OKlahoma Posts: 114	Re: Cutting up a couple 65 trucks I would be interested in the inner fenders if they are in good condition and you are willing to ship to 74017 Thanks.

01-24-2017, 05:41 PM	#7
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: Cutting up a couple 65 trucks How much for the second truck as is?

01-24-2017, 06:50 PM	#8
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Cutting up a couple 65 trucks is this a steering damper or part of powersteering? if ps i'll take all the parts Attached Images

01-24-2017, 07:42 PM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks I will be getting to these in the next couple days and have answers. The 2nd truck is a 2wd that was converted to 4wd using 73-87 4x4 parts. They did an UGLY job on the conversion. Thanks

01-24-2017, 09:37 PM	#10
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 642	Re: Cutting up a couple 65 trucks Firewall part of high hump?

01-24-2017, 11:00 PM	#11
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 560	Re: Cutting up a couple 65 trucks Looking for pass side 292 frame to motor mount perch for a 4x4

01-25-2017, 12:50 AM	#12
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: Cutting up a couple 65 trucks Price on rear end in 2WD truck?

01-25-2017, 01:33 AM	#13
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Cutting up a couple 65 trucks Ray, I will take the lower radiator supports if four core, an what condition is the core support? Thanks, Les

01-25-2017, 09:24 PM	#14
sjsmo Registered User Join Date: Aug 2016 Location: manor pa. Posts: 5	Re: Cutting up a couple 65 trucks looking for the park brake handle and mounting bracket....

01-25-2017, 11:38 PM	#15
65TRUK Registered User Join Date: Jul 2012 Location: Midland, MI Posts: 46	Re: Cutting up a couple 65 trucks Looking for 2WD Parking Brake Actuating Lever and Parking Brake Actuating Rod and Anti-rattle Spring for both sides. (You probably know this, but the parts I'm after are inside the rear drums. Thought I had them, but nope .... so I have to locate some.) Should also mention that I don't know how the Parking Brake Actuating Lever attaches to the brake shoe .. so I'd like that connecting bolt or pin or whatever.) Thanks,



Register or Log In To remove these advertisements.

01-26-2017, 11:02 AM	#16
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks I'm spending today working on these trucks. The e brake crossmember looks good $65 shipped I will get a better look at the inner fenders when I pull the front off. The high hump firewall looks good $75 shipped. The 2wd front suspension and rear axle are sold locally. The radiator core support looks rough on the one and I will take a close look at the other. I will check the shelf for drum springs and hardware. I will post more pictures. Thanks!

01-26-2017, 02:21 PM	#17
KVB Registered User Join Date: Oct 2010 Location: La Prairie, Quebec Posts: 231	Re: Cutting up a couple 65 trucks PM Sent.

01-26-2017, 08:40 PM	#18
KVB Registered User Join Date: Oct 2010 Location: La Prairie, Quebec Posts: 231	Re: Cutting up a couple 65 trucks Would you have any heater control knobs?

01-27-2017, 01:38 AM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks The radiator core supports and inner fenders are bad. e brake handle with bracket...$38 shipped e brake crossmember... $65 shipped to lower 48. Canada extra high hump firewall...$75 shipped Here's some pictures: Attached Images

01-27-2017, 01:43 AM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks 2222 Attached Images

01-27-2017, 01:47 AM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Cutting up a couple 65 trucks 3333 Attached Images

01-27-2017, 08:36 AM	#22
KVB Registered User Join Date: Oct 2010 Location: La Prairie, Quebec Posts: 231	Re: Cutting up a couple 65 trucks Pm sent.

01-27-2017, 11:44 AM	#23
Isaiah92260 Registered User Join Date: Jul 2015 Location: Whittier, CA Posts: 851	Re: Cutting up a couple 65 trucks Do you have the fenders and front grille support? Let me know please

11-19-2017, 06:28 AM	#24
dkerr Registered User Join Date: Oct 2017 Location: Upper Hutt, New Zealand Posts: 16	Re: Cutting up a couple 65 trucks Are the e brake stuff still available?

01-27-2017, 02:37 PM	#25
automoto Registered User Join Date: Aug 2007 Location: Shore, New Jersey Posts: 24	Re: Cutting up a couple 65 trucks do you have the passenger side fresh air vent assembly or even just the vent door/handle?

Register or Log In To remove these advertisements.