UT FS: Lots of Gauges and Cluster Parts

[79vette]

I have about 15 clusters worth of gauges, circuits, housings, and misc. pieces. All years/styles, from 73-91. All are used, pulled from local salvage yards. Condition ranges from near-mint to fair driver quality.

I have voltmeters, ammeters, temp gauges, fuel gauges, speedo heads, a few clocks, housings, circuit boards, PRDNL indicators, and tons of the little lens parts (turn signal/4WD/choke/etc). There are a few of the fiber optic ashtray lights in good shape. I dont have any really clear plastic lenses or good clean gauge bezels, but I have most of the other parts.

Post if you want anything and I will put up pics. I'm new around here, but I've been selling these on ebay for a couple years with good feedback. Ebay name "WasatchChevyParts" http://www.ebay.com/usr/wasatchchevyparts

[1978 Cheyenne Big 10]

Hello,
I am looking for a clock and Gauge Cluster Clear Lens w/ Clock Option and rubber grommet.
Early Design 73-78. Clock stem is at 12
Thanks
Mike
shipping is to GA 30519

[TKCR]

Originally Posted by 1978 Cheyenne Big 10

Hello,
I am looking for a clock and Gauge Cluster Clear Lens w/ Clock Option and rubber grommet.
Early Design 73-78. Clock stem is at 12
Thanks
Mike
shipping is to GA 30519

This is his eBay ad:

http://www.ebay.com/itm/73-87-OEM-Ch...VYq9o~&vxp=mtr

[K25alive]

Do you have a 6432019 fuel gauge? This is the small fuel gauge with orange needle. It only shows the word FUEL on the face.

[79vette]

Originally Posted by K25alive

Do you have a 6432019 fuel gauge? This is the small fuel gauge with orange needle. It only shows the word FUEL on the face.

Sorry, I dont have any of the small type fuel gauges. Only the larger type for the non-tach clusters.

Originally Posted by 1978 Cheyenne Big 10

Hello,
I am looking for a clock and Gauge Cluster Clear Lens w/ Clock Option and rubber grommet.
Early Design 73-78. Clock stem is at 12

I do have the clock; the link TKCR posted is correct. It is in good shape, except the screw that holds the knob on. The third pic on the listing shows it is damaged. The clock can be adjusted fine as-is and the screw is removable, but it is irritating to take it out. Price is negotiable on account of that.

I also have the lens that came with that clock, but it isnt super nice. The rubber grommet is dried out and hard and the lower right mounting point is broken off. The other 5 are still there. There is not any noticeable hazing or discoloration in the lens and I would consider it suitable for a driver, but it has a lot of light scratches in it. I will get some pics up tomorrow.

[1978 Cheyenne Big 10]

Sent you a PM
thanks

[GonicGM]

Would be interested in a damage free 1987 cluster housing, gauges, no tach or clock. Also any good tach cluster printed circuits, any year.

[GonicGM]

Also orange pointer and screw retained cable.

[79vette]

I have some orange pointers with the screw cables. Do you need the metal plate with the shift pattern as well, or just the pointer?

I believe the 1987 clusters had the cable for the speedo cable on the speedometer itself, not on the housing like the earlier ones. I will check for a damage free unit, and get back with pictures if I have one.

Unfortunately I don't have any tach printed circuits, sorry.

[79vette]

Lens and 73-79 clock are sold. 1978 Cheyenne Big 10, your package will be on its way Monday morning.

Still have one of the later style clocks (80s), and lots of other stuff. Housings, circuits, lots of gauges and little plastic lenses (turn signals, 4WD, etc)

[flatbed82]

Do you have any housings for a tachometer cluster without broken tabs?

[79vette]

Sorry, I dont have any parts for tach clusters.

[1978 Cheyenne Big 10]

Received the clock and lens today!
Just as described and fast shipping.
Thank you
Mike

[79vette]

Sounds good! Let me know if you have any problems getting the clock to fit into your housing, or with anything else. Thanks again.

[87Scotty]

I am looking for just the second hand for a clock. Do you have a broken/non working clock that I could buy the second hand from?
Thanks,
87Scotty

[79vette]

Unfortunately not. All the clocks went fast. I'll keep you in mind if I do come across one though.

Thanks

[TBONE1964]

Do you have any volt gauges? Both styles are OK (76-80 and 81-87) as long as they work. Not worried about cosmetic condition.

Let me know.

Thank you,
Tom

[79vette]

I think you might have got a hold of me through ebay last week, but I'm not sure. I'm WasatchChevyParts on ebay.

I do have a bunch of volt gauges; most are in reasonable cosmetic condition except one that is missing its pointer. They are not tested at this time, but I will test prior to shipping. I have 10 or so between both styles, and they are all in good cosmetic condition and are most likely working.

Let me know how many you need, and I will test them for you.

[TBONE1964]

Originally Posted by 79vette

I think you might have got a hold of me through ebay last week, but I'm not sure. I'm WasatchChevyParts on ebay.

I do have a bunch of volt gauges; most are in reasonable cosmetic condition except one that is missing its pointer. They are not tested at this time, but I will test prior to shipping. I have 10 or so between both styles, and they are all in good cosmetic condition and are most likely working.

Let me know how many you need, and I will test them for you.

Good to know you are a member here and I will get with you when I need some. Yes it was me inquiring on eBay.

Take care,
Tom

[capone550]

Do you have any clear lenses without the clock or trip reset?

[Olive1970]

Do you have any known working speedo heads for a 1977?

[tanman722001]

Hi I'm looking for a fuel gauge for my 84 Chevy. Let me know price

[RWJJR]

Interested in a orange pointer , pm me a price shipped to 37840.

[ms2335]

price on 84 guage housing for clock with no broken mounting tabs

[wbmoore]

Do you have a 1991 electronic speedometer cluster ? Thanks.