The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-07-2017, 07:20 AM   #1
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Ned help cargo lamo wire

hi guys, ok prior to me doing a cargo lamp delete both cargo light and dome light were working off the switch. but since the delete the cargo lamp delete the dome light will not come back on, i have the orange and white wire snipped off at the ends.. and the dome light is still wired up.. how can i wire it up so that the switch work for the dome light only....
loujizzel is offline   Reply With Quote
Old 03-07-2017, 12:09 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: Ned help cargo lamo wire

Have you checked to make sure you have power in and out of your switch and the bulb? Im trying to remember but I think mine only worked if the lights were on.(maybe that was just the cargo light).I know I rewired my lights with a constant power supply so theyd work when I wanted them to

Last edited by mongocanfly; 03-07-2017 at 12:37 PM.
mongocanfly is offline   Reply With Quote
Old 03-07-2017, 01:31 PM   #3
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Re: Ned help cargo lamo wire

Thanks for the reply but it was working even if the truck was off I read somewhere that it's part of the circuit the cargo light I mean so the cargo light works with the dome light it actually completes the circuit so just trying to figure out how I can delete those wires and still make the circuit I am definitely not an electrician
loujizzel is offline   Reply With Quote
Old 03-08-2017, 07:53 PM   #4
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Re: Ned help cargo lamo wire

So after reading and looking at diagrams it seems like the cargo lamp is the switch. Now that it is gone my cab light wont work because the circut is not complete... i took some pics so you can see my situation and maybe someone can give me and ez fix ( it's never easy)

Pic 1 where the cargo lamp used to be

Pic 2 the dome light

Pic 3 the remaining wires after cargo lamp was deleted

Pic 4 the backside of the switch the back side of the switch
Attached Images
  

Last edited by loujizzel; 03-08-2017 at 07:58 PM.
loujizzel is offline   Reply With Quote
Old 03-08-2017, 07:58 PM   #5
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Re: Ned help cargo lamo wire

Pics 3 and 4
Attached Images
  
loujizzel is offline   Reply With Quote
Old 03-08-2017, 08:47 PM   #6
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: Ned help cargo lamo wire

One of those wires coming up behind the door post is going to be your interior light wire..it will only have power on it when the door is open or you have you headlight switch turned for interior lights..find that wire and hook it to the hot wire going directly to the interior light..bypass the cargo light switch..you won't need it..like I said I wired mine independent of each other..
mongocanfly is offline   Reply With Quote
Old 03-10-2017, 04:35 PM   #7
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: Ned help cargo lamo wire

Sorry I steered you wrong at first..for some reason I was thinking the switch sent power to the light..not that the switch actually completed the ground circuit
mongocanfly is offline   Reply With Quote
Old 03-10-2017, 04:48 PM   #8
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Talking Re: Ned help cargo lamo wire

No worry brother I think what I'm going to do is take the orange wire that I have cut from the cargo light and I'm going to run that to a hot lead maybe even the battery of the car and then I'm going to ground the white wire and see what happens what else can I do but blew a fuse
loujizzel is offline   Reply With Quote
Old 03-12-2017, 03:15 PM   #9
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
Re: Ned help cargo lamo wire

I know I late but the cargo light wiring just unplugs. Up near the dome light you did not have to cut wires.
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Old 03-18-2017, 02:30 PM   #10
loujizzel
Registered User
 
Join Date: Dec 2015
Location: Temecula ca
Posts: 254
Re: Ned help cargo lamo wire

for all those who gave me some ideas to ix my little problem thank you... its working the way i want it to
loujizzel is offline   Reply With Quote
Old 03-18-2017, 03:39 PM   #11
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: Ned help cargo lamo wire

Good deal...
mongocanfly is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com