power window hook up

[timberjim36]

I just picked up a set of power doors for my 80 V30 and im trying to figure out how to get the wiring hooked up at the fuse box anybody have any pics or guidance

[gmachinz]

What year are your doors?

[timberjim36]

I belive theyre 85

[gmachinz]

Well...77-80 is one style and 81-up is another. You need a new style harness since those are newer doors. The fuse panel only requires an IGN source and Battery source. Window circuit will also need a chassis ground underdash. So, if you want to save a little $$$, you need to pull a complete harness from an 81-up Suburban or crewcab-then install it all as-is into your truck. If you don't have power in it now, you need to drill for cab-door grommets too-both inside and outside. I can supply you with a complete hybridbharness just for your application for a clean stock appearance but otherwise you'll need to source it all from a newer truck....trust me those are your two options.

[timberjim36]

Ok thanks thats what i had kinda figured heading to the bone yard tomorrow so ill look aeound

[gmachinz]

If you are going to a junkyard, hit up the older GM stuff w/power windows and look for the glass fuse block style blue and red connectors-you'll need those for IGN power and Battery power.