Walbro fuel pump tip... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suburban99 · 05-04-2017, 03:56 PM

I thought I would share my recent experience with mounting a Walbro 255 inline in my 72 K10 6.0 swap...stock in cab tank....I used Moroso rubber mounts to isolate the pump from the frame and it's very quiet. I used the exact same pump on my '62 5.3 swap without the mounts and it was loud... definitely worth the money.

**mongocanfly** · 05-04-2017, 04:12 PM

Could you post up the part numbers?

BR3W CITY · 05-05-2017, 01:15 AM

Mine came with a rubber/foam condom thingy that always kept it fairly quite. I imagine just pump housing straight to metal bracket would be noisy since nothing is eating any of that vibration.

Jstock85 · 05-05-2017, 12:12 PM

you have any pictures of your setup?

suburban99 · 05-06-2017, 04:13 AM

The isolators are MSD 8800...when I get back I will post some pics

**mongocanfly** · 05-06-2017, 05:27 AM

Ok I guess that's why I couldn't findem...msd...not moroso...thanks

suburban99 · 05-06-2017, 01:12 PM

Quote:

Originally Posted by mongocanfly

Ok I guess that's why I couldn't findem...msd...not moroso...thanks

Yeah some days I have O-L-D...

BR3W CITY · 05-07-2017, 08:30 PM

Quote:

Originally Posted by suburban99

Yeah some days I have O-L-D...

Online Learning Disorder

suburban99 · 05-10-2017, 12:37 AM

Here's a couple of pictures.
Starts with stock hard piping>then valve>then ford ranger filter (had it laying around)>then pump>then 100 micron filter.
I highly recommend the shutoff valve to service the filters...when I LS swapped my '62, I had lots of dirt get in the filter even though the tank looked clean. I guess the constant return line stirs it up.

**mongocanfly** · 05-10-2017, 03:01 AM

Burb99..does your setup use the return rail from engine for your bypass?

Jstock85 · 05-10-2017, 09:15 AM

Thanks for the pics. good idea on the valve. You recommend a specific part or is that brass fitting anyone can get from Ace HD or lowes?

05-04-2017, 03:56 PM	#1
suburban99 Registered User Join Date: May 2014 Location: Mission BC Posts: 452	Walbro fuel pump tip... I thought I would share my recent experience with mounting a Walbro 255 inline in my 72 K10 6.0 swap...stock in cab tank....I used Moroso rubber mounts to isolate the pump from the frame and it's very quiet. I used the exact same pump on my '62 5.3 swap without the mounts and it was loud... definitely worth the money. __________________ 1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped

05-04-2017, 04:12 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: Walbro fuel pump tip... Could you post up the part numbers?

05-05-2017, 01:15 AM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Walbro fuel pump tip... Mine came with a rubber/foam condom thingy that always kept it fairly quite. I imagine just pump housing straight to metal bracket would be noisy since nothing is eating any of that vibration. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

05-05-2017, 12:12 PM	#4
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Walbro fuel pump tip... you have any pictures of your setup?

05-06-2017, 04:13 AM	#5
suburban99 Registered User Join Date: May 2014 Location: Mission BC Posts: 452	Re: Walbro fuel pump tip... The isolators are MSD 8800...when I get back I will post some pics __________________ 1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped

05-06-2017, 05:27 AM	#6
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: Walbro fuel pump tip... Ok I guess that's why I couldn't findem...msd...not moroso...thanks

05-10-2017, 12:37 AM	#9
suburban99 Registered User Join Date: May 2014 Location: Mission BC Posts: 452	Re: Walbro fuel pump tip... Here's a couple of pictures. Starts with stock hard piping>then valve>then ford ranger filter (had it laying around)>then pump>then 100 micron filter. I highly recommend the shutoff valve to service the filters...when I LS swapped my '62, I had lots of dirt get in the filter even though the tank looked clean. I guess the constant return line stirs it up. Attached Images __________________ 1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped

05-10-2017, 03:01 AM	#10
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: Walbro fuel pump tip... Burb99..does your setup use the return rail from engine for your bypass?

05-10-2017, 09:15 AM	#11
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Walbro fuel pump tip... Thanks for the pics. good idea on the valve. You recommend a specific part or is that brass fitting anyone can get from Ace HD or lowes?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.