Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-15-2017, 11:14 PM | #1 |
Registered User
Join Date: Mar 2013
Location: Manitoba
Posts: 184
|
silverado fuel pump/sender fitting
On a factory in-tank pump feed and return from 2001 silverado, can I use either of these fittings *on the sender*?
https://www.summitracing.com/int/par...4123/overview/ https://www.summitracing.com/int/parts/tnk-640853 I used the Russel part on my fuel rails and worked fine, and I liked the threaded retaining cap. Now, I'm going to ditch the inline Walbro and sink the 2001 pump into a rear mount tank. Will the Russel piece work right on the sender as well or do I have to use something like the Tanks Inc fitting? |
06-16-2017, 06:11 AM | #2 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,051
|
Re: silverado fuel pump/sender fitting
They are the same as fuel rail. The emissions line is diffirent. I used the MU1416 pump module it only has one electrical plug for the pump no emissions electrical connection.
The all aluminum fittings are the only ones I will use on my trucks. Amazon.ca had the 3/8 fittings for. $18 last week.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD |
Bookmarks |
|
|