230/250 Intake and exhaust manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Marcus4800 · 10-06-2017, 08:23 PM

I'm restoring a 63 stepside with a 230 6 cyl motor. Both the intake and exhaust manifolds are pretty much junk, I found new exhaust manifold on ebay for $139 but have not found a new intake manifold. Checked with the local wrecking yards for used ones but no luck. Does anybody have any helpful hints where I might find new or used 230 manifolds???? Thanks...

Lugnutz65 · 10-06-2017, 09:36 PM

Quote:

Originally Posted by Marcus4800

I'm restoring a 63 stepside with a 230 6 cyl motor. Both the intake and exhaust manifolds are pretty much junk, I found new exhaust manifold on ebay for $139 but have not found a new intake manifold. Checked with the local wrecking yards for used ones but no luck. Does anybody have any helpful hints where I might find new or used 230 manifolds???? Thanks...

I am not aware of any vendors selling factory style intake or exhaust manifolds. There are upgraded intake manifolds available, but they usually require aftermarket headers for the exhaust.

I will send you a PM. I have a few used manifolds in good shape.

Marcus4800 · 10-06-2017, 11:06 PM

Lugnutz65.... sent you a PM.... Thanks

**The Rocknrod** · 10-07-2017, 10:34 AM

These are used parts sellers you can contact any or all of these people if you want the part:
http://www.aspenautoaz.com/60-66-chevy-truck-parts.html
http://www.billstruckshop.com/60-66used-T.html
http://www.4-5-6chevytrucks.com/used-parts.html
http://ctcautoranch.com/index.html
https://dennischevytruckparts.com/ch...s-years-60-66/

Marcus4800 · 10-07-2017, 09:34 PM

Thanks for the sites The Rocknrod.....

**jayoldschool** · 10-08-2017, 12:28 PM

Why are your manifolds "junk"? Just rusty, or do they actually have damage?

Marcus4800 · 10-08-2017, 12:55 PM

Quote:

Originally Posted by jayoldschool

Why are your manifolds "junk"? Just rusty, or do they actually have damage?

They are cracked. When I was trying to separate the 2 to replace the gasket they both cracked.

**jayoldschool** · 10-08-2017, 09:21 PM

Yep, that would do it.

66herbie · 10-12-2017, 01:18 AM

I have a set, exhaust is fubard but the intake is alright if your still in need

Marcus4800 · 10-13-2017, 10:24 AM

Quote:

Originally Posted by 66herbie

I have a set, exhaust is fubard but the intake is alright if your still in need

I think I have a complete set found. I'll know for sure next week....

**paulspickupparts** · 10-13-2017, 01:06 PM

I also have a set

vince1 · 10-12-2017, 07:29 AM

Dorman?

10-06-2017, 08:23 PM	#1
Marcus4800 Registered User Join Date: Feb 2017 Location: Kaufman, Tx Posts: 53	230/250 Intake and exhaust manifold I'm restoring a 63 stepside with a 230 6 cyl motor. Both the intake and exhaust manifolds are pretty much junk, I found new exhaust manifold on ebay for $139 but have not found a new intake manifold. Checked with the local wrecking yards for used ones but no luck. Does anybody have any helpful hints where I might find new or used 230 manifolds???? Thanks...

10-06-2017, 11:06 PM	#3
Marcus4800 Registered User Join Date: Feb 2017 Location: Kaufman, Tx Posts: 53	Re: 230/250 Intake and exhaust manifold Lugnutz65.... sent you a PM.... Thanks

10-07-2017, 10:34 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 230/250 Intake and exhaust manifold These are used parts sellers you can contact any or all of these people if you want the part: http://www.aspenautoaz.com/60-66-chevy-truck-parts.html http://www.billstruckshop.com/60-66used-T.html http://www.4-5-6chevytrucks.com/used-parts.html http://ctcautoranch.com/index.html https://dennischevytruckparts.com/ch...s-years-60-66/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-07-2017, 09:34 PM	#5
Marcus4800 Registered User Join Date: Feb 2017 Location: Kaufman, Tx Posts: 53	Re: 230/250 Intake and exhaust manifold Thanks for the sites The Rocknrod.....

10-08-2017, 12:28 PM	#6
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: 230/250 Intake and exhaust manifold Why are your manifolds "junk"? Just rusty, or do they actually have damage?

10-08-2017, 09:21 PM	#8
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: 230/250 Intake and exhaust manifold Yep, that would do it.

10-12-2017, 01:18 AM	#9
66herbie Registered User Join Date: Aug 2012 Location: Regina Saskatchewan Posts: 12	Re: 230/250 Intake and exhaust manifold I have a set, exhaust is fubard but the intake is alright if your still in need

10-13-2017, 01:06 PM	#11
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 230/250 Intake and exhaust manifold I also have a set

10-12-2017, 07:29 AM	#12
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: 230/250 Intake and exhaust manifold Dorman?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.