Blazer parts you can't buy aftermarket. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Sand Wrench** · 01-23-2018, 11:32 PM

Shout out your favorite hard to find Blazer parts! I'll start with Spicer locking hubs.

jeffg1010 · 01-24-2018, 05:41 AM

Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold.

rsavage · 01-24-2018, 07:10 AM

Quote:

Originally Posted by jeffg1010

Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold.

These without the plastic are available

https://www.classicindustries.com/pr...s/a510016.html

**1rippen6** · 01-24-2018, 08:38 AM

Reinforcement plates for the doors and bucket seat channel under the floor!

twp1 · 01-24-2018, 08:44 AM

Fiberglass Tops!!!!

Mike C · 01-24-2018, 09:37 AM

Bucket seat tracks and folding latch.

**1rippen6** · 01-24-2018, 10:29 AM

Quote:

Originally Posted by Mike C

Bucket seat tracks and folding latch.

Folding latch is reproduced now lookup Utahboy in the for sale section. Actually its the catch that is reproduced sorry.

ls1nova71 · 01-24-2018, 11:22 AM

The chrome strips that go above the rear door panels on a CST. Oh, and top hold down brackets! And sunvisors and sunvisor screws, rear carpet strips, the list goes on...

cleszkie · 01-24-2018, 02:31 PM

Quote:

Originally Posted by twp1

Fiberglass Tops!!!!

Someone already re-pops the fiberglass hatch and its a POS. I'm afraid of what the top would end up like if it was re-popped.

cleszkie · 01-24-2018, 02:34 PM

I got it - the rear tail light portions of the quarter panels. From the turn signal to the tail light housing only. They only re-pop the suburban tail light portion right now.

**mrtoni** · 01-24-2018, 10:14 AM

Leveling mat, sliding windows (not oem but rare)

Paintpro · 01-24-2018, 10:05 PM

I have one die made to reproduce the Lh door reinforcement plate. Just wondering how many people would be interested in them before I have the other side made.

notoriousnsb · 01-29-2018, 04:32 PM

Quote:

Originally Posted by Paintpro

I have one die made to reproduce the Lh door reinforcement plate. Just wondering how many people would be interested in them before I have the other side made.

Having reproduction reinforcement plates would be great based on going with original truck doors for good fitment.
Posted via Mobile Device

**1rippen6** · 01-29-2018, 09:49 PM

Clips for the hatch rods, unless someone knows were to get them.

Rawhedrex · 01-30-2018, 08:08 PM

Quote:

Originally Posted by 1rippen6

Clips for the hatch rods, unless someone knows were to get them.

I used these:

https://www.classictruck.com/product...Tailgate_Items

**1rippen6** · 01-31-2018, 10:45 AM

Quote:

Originally Posted by Rawhedrex

I used these:

https://www.classictruck.com/product...Tailgate_Items

Yea that's what I've been using but sometimes there is interference and I have to find a different one.

awelle01 · 02-01-2018, 04:39 PM

Quote:

Originally Posted by notoriousnsb

Having reproduction reinforcement plates would be great based on going with original truck doors for good fitment.
Posted via Mobile Device

+1 for a set as well

chevyguy_72 · 02-01-2018, 05:13 PM

Quote:

Originally Posted by notoriousnsb

Having reproduction reinforcement plates would be great based on going with original truck doors for good fitment.
Posted via Mobile Device

+1 Me too Me too... lol

Huggerorangeblood · 01-26-2018, 02:49 AM

What about top delete pieces?

**richard2717** · 01-28-2018, 03:26 PM

Rear seat floor brackets

**jaros44sr** · 01-28-2018, 07:43 PM

I'd really to see tilt steering column bearings become available, there like hensteeth now. Mine are new, but down the road, who knows if they will be available. I got my last set from Wes, they were his last

scott123 · 02-01-2018, 05:43 PM

The rear hatch hard ware, especially the side ratchet pieces.

I have all mine and did not realize they were not available.

I sold a top not too long ago in rough condition but the hardware was worth the price of the top to the buyer.

S

jaxncurtis · 02-05-2018, 04:41 PM

Swing Gate Spare Tire Holder would be stellar!!

I want/need one now!!

**richard2717** · 02-09-2018, 06:11 PM

I think it is great, IF, they are right. If I had not been researching this already I would not have known to ask this. I already have several boxes of the .60 head and here is picture difference. They will fit in the outside hole but the inside hole is too small on the visor bracket. This is the 1st page I have seen reference of "jackson" so I am just wanting to see if it might be considered a reduced size head like our original bastard screws are.

Richard

.

awelle01 · 02-09-2018, 06:20 PM

for 2-3268, the way i read the table you posted, it says 1/4 head, which if you reference the top table it says 1/4 head = .48" diameter. which is also the same info the lady gave me over the phone when i ordered. additionally they fit the visor bracket i tested last night, unless i was imagining things.

And correct, there is a $20 minimum, so i ordered extras. I can double-check tonight if needed

01-23-2018, 11:32 PM	#1
Sand Wrench Senior Member Join Date: Sep 2016 Location: Garnett, Kansas Posts: 279	Blazer parts you can't buy aftermarket. Shout out your favorite hard to find Blazer parts! I'll start with Spicer locking hubs.

01-24-2018, 05:41 AM	#2
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: Blazer parts you can't buy aftermarket. Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

01-24-2018, 08:38 AM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Blazer parts you can't buy aftermarket. Reinforcement plates for the doors and bucket seat channel under the floor!

01-24-2018, 08:44 AM	#5
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: Blazer parts you can't buy aftermarket. Fiberglass Tops!!!!

01-24-2018, 09:37 AM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: Blazer parts you can't buy aftermarket. Bucket seat tracks and folding latch. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

01-24-2018, 11:22 AM	#8
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Blazer parts you can't buy aftermarket. The chrome strips that go above the rear door panels on a CST. Oh, and top hold down brackets! And sunvisors and sunvisor screws, rear carpet strips, the list goes on... __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-24-2018, 02:34 PM	#10
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Blazer parts you can't buy aftermarket. I got it - the rear tail light portions of the quarter panels. From the turn signal to the tail light housing only. They only re-pop the suburban tail light portion right now.

01-24-2018, 10:14 AM	#11
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,881	Re: Blazer parts you can't buy aftermarket. Leveling mat, sliding windows (not oem but rare)

01-24-2018, 10:05 PM	#12
Paintpro Registered User Join Date: Nov 2008 Location: Hermann, MO Posts: 28	Re: Blazer parts you can't buy aftermarket. I have one die made to reproduce the Lh door reinforcement plate. Just wondering how many people would be interested in them before I have the other side made.

01-29-2018, 09:49 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Blazer parts you can't buy aftermarket. Clips for the hatch rods, unless someone knows were to get them. Attached Images

01-26-2018, 02:49 AM	#19
Huggerorangeblood Registered User Join Date: Apr 2011 Location: Corvallis, Or Posts: 119	Re: Blazer parts you can't buy aftermarket. What about top delete pieces?

01-28-2018, 03:26 PM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer parts you can't buy aftermarket. Rear seat floor brackets __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-28-2018, 07:43 PM	#21
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Blazer parts you can't buy aftermarket. I'd really to see tilt steering column bearings become available, there like hensteeth now. Mine are new, but down the road, who knows if they will be available. I got my last set from Wes, they were his last __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-01-2018, 05:43 PM	#22
scott123 Registered User Join Date: Dec 2007 Location: Middleburg, North Carolina Posts: 480	Re: Blazer parts you can't buy aftermarket. The rear hatch hard ware, especially the side ratchet pieces. I have all mine and did not realize they were not available. I sold a top not too long ago in rough condition but the hardware was worth the price of the top to the buyer. S

02-05-2018, 04:41 PM	#23
jaxncurtis Registered User Join Date: May 2017 Location: Gilbert, AZ Posts: 33	Re: Blazer parts you can't buy aftermarket. Swing Gate Spare Tire Holder would be stellar!! I want/need one now!!



Register or Log In To remove these advertisements.

02-09-2018, 06:11 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer parts you can't buy aftermarket. I think it is great, IF, they are right. If I had not been researching this already I would not have known to ask this. I already have several boxes of the .60 head and here is picture difference. They will fit in the outside hole but the inside hole is too small on the visor bracket. This is the 1st page I have seen reference of "jackson" so I am just wanting to see if it might be considered a reduced size head like our original bastard screws are. Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-09-2018, 06:20 PM	#25
awelle01 Registered User Join Date: Dec 2014 Location: Chandler, AZ Posts: 65	Re: Blazer parts you can't buy aftermarket. for 2-3268, the way i read the table you posted, it says 1/4 head, which if you reference the top table it says 1/4 head = .48" diameter. which is also the same info the lady gave me over the phone when i ordered. additionally they fit the visor bracket i tested last night, unless i was imagining things. And correct, there is a $20 minimum, so i ordered extras. I can double-check tonight if needed

Register or Log In To remove these advertisements.