Anyone use a whole floor panel?

[Pinchecharlie]

Have a guy who's going to help me do rust and he suggested doing the whole floor. Said after labor that it was faster and easier with a whole new floor. He's done a bunch and he gets paid so I trust his opinions but I wonder if they fit worth a crap? He's used to old ford and early hot rod stuff. Anybody use a whole new floor stamping for 60-66? How's it fit? Would you recommend them? My trucks bad from rocker in about 2 inches of floor an from firewall to back cab.thers a few other bad spots in the floor at random too. Thanks charlie

[Captainfab]

That sounds like a lot of extra work and a LOT of extra expense if all you need are the outer floor/inner rockers and the outer rockers. How are the cab mounts, lower A pillars, lower B pillars and the kick panels?

[Pinchecharlie]

I thought the same thing. The outer rockers inner rockers and about 2_3 inches of floor from firewall to cab corners are gone.driver's footwells bad and a pretty big hole/and thin metal on the passenger side a couple of small holes around here and there. The cab to door mounts are all half gone. Hind-sight, buy a better truck! Good news is the lmc floor comes with the cross braces and the cab mounts installed for about the same price as some other floors. We added up the patch panels around 400 something but he thinks the whole floor will be twice as fast? If it was me doing it I would patch it together with sheet.metal but I just don't have a lot of time these days and he's giving me a great price for it and paint and letting me do all the blasting and prep/prime so I can save some money Lol! Floor was 600 free shippi g with his order and you can do a lot with that but he swears he'll have it in in a few hours! I told him all the bad fitting crap was his problem and his time and he didn't seem to worried. He just did a 55 truck and said it was way easier? Probably over kill but he's my friend and he usually doesn't work on my stuff and he's really good and busy so I guess we'll See? Wish I had time to piece it together but if I do it will be there for months. I gotta have the truck there stripped and ready to blast by the end April so here we go again. Next time I am going g to buy a finished vehicle lol. Here's some pics wish I had your skills capt! It would be do e all ready with scraps lying around. I re.eber now why I dread paint and body.heres car I've been doing for 5 years!! I built all the panels and basically had to rebuild 80% of all the sheet metal front back floor roof you name it. I actually love do I g it but I am slow and the works not show quality and so.e I do 3,4 times and it still sucks lol. I bet I have 40 hours in the sail and back panel on that turd.

[Captainfab]

Let us know how it goes with changing the entire floor.

[pimpston65]

i bought the full floorpan for girls burb, only because the all the supports were rusted away. yet on my 65 i just cut out the rot and replaced with fresh metal, the supports were fine on that truck.

[Pinchecharlie]

Originally Posted by pimpston65

i bought the full floorpan for girls burb, only because the all the supports were rusted away. yet on my 65 i just cut out the rot and replaced with fresh metal, the supports were fine on that truck.

Oh wow a suburban floor that has to be a job! Seems like a lot of work? How did it go in? Iam. Feelng a bit dumb about not fixing it myself but my friend has a new baby and I think he needs some baby money so a good cause . But a 1k dollar floorr on a 2500 dollar truck is pretty dumb. Oh well! Hopefully it doesn't turn I to a nightmare where we use the floor as patch panels or worse get so mad it ends up in the dumpster. I think I need a 12 step program for my illness. Or I should hire my self out as a deconstruction expert because I can tear a truck/car apart in no time flat...but...I go silly and broke and have teouble getting it back together!

[GMC-YA68]

I was in your position, but ended up figuring out I’d be better off finding another cab.

[Robert Haas]

What is the big deal. Easy enough to do.

[pimpston65]

Originally Posted by Robert Haas

What is the big deal. Easy enough to do.

Attachment 1762645

Attachment 1762646

Attachment 1762647

Attachment 1762648

Attachment 1762649

wow, im totally stealing the internal brace!!! im just lifting mine about 6" off the frame. you should take it to shows thats a work of art!!!

[61K10]

I would say it's a big deal if doing it by yourself. Nice fixtures also.

[Robert Haas]

Originally Posted by 61K10

I would say it's a big deal if doing it by yourself. Nice fixtures also.

There is only two of us, we are old men with no experience. Sometimes being ignorant gives us false confidence.

[Pinchecharlie]

Originally Posted by Robert Haas

There is only two of us, we are old men with no experience. Sometimes being ignorant gives us false confidence.

thats me too! i allways say "how hard can it be?"

then i get ms a@# kicked lol!

funny how we all brace the poop out of everything. that 49 of mine was a maze of bracing and it still was floopsy moopsy when i cut the roof off.
so...when i asked my buddy how he wanted me to brace it for him he said dont do any! he said he braced and welded the doors on the 55 for the floor and it was a nightmare for him? ended up cutting it all free and doing it
I think hes crazy!
said he would lift the cab off the frame
fit the new floor on the frame
lower the cab over the new floor about 6 inches high fit the doors
cut out the old floor out and start fitting?
i told him it was not how everyone else did it and that the truck was going to lose its shape and he was going to get his a#$ kicked and have to find me a new cab all for no pay! he said that he didnt think trucks moved enough for the trouble
i think hes crazed and that its going to remind him how bad he wants to retire and how his son is right and just wants to do collision insurance work.
well see, floors in the mail. i personally think its fun to do over the top stuff and apreciate the hard work your doing to your cab!!!!

[Robert Haas]

I think the bracing on any de-floor-ectomy is important. One side benefit of ours was it gave us a nice structure to mount the rotisserie to. I prefer to swing the cab on its side axis as it gives better access to the firewall where we plan on building a new one from scratch.

[andyh1956]

Originally Posted by Pinchecharlie

thats me too! i allways say "how hard can it be?"

then i get ms a@# kicked lol!

funny how we all brace the poop out of everything. that 49 of mine was a maze of bracing and it still was floopsy moopsy when i cut the roof off.
so...when i asked my buddy how he wanted me to brace it for him he said dont do any! he said he braced and welded the doors on the 55 for the floor and it was a nightmare for him? ended up cutting it all free and doing it
I think hes crazy!
said he would lift the cab off the frame
fit the new floor on the frame
lower the cab over the new floor about 6 inches high fit the doors
cut out the old floor out and start fitting?
i told him it was not how everyone else did it and that the truck was going to lose its shape and he was going to get his a#$ kicked and have to find me a new cab all for no pay! he said that he didnt think trucks moved enough for the trouble
i think hes crazed and that its going to remind him how bad he wants to retire and how his son is right and just wants to do collision insurance work.
well see, floors in the mail. i personally think its fun to do over the top stuff and apreciate the hard work your doing to your cab!!!!

This is xactly how we did a 57 Chevy. Lifted body off frame w/ a two post lift, rolled chassis out, cut old floor out, set new floor on chassis, roll under body & let it down & start welding. Didn't brace anything. Doors still shut better than ever.

[61K10]

well you have one more set of hands than i do. Old? I've always said you're only as young as you feel. As that being said being close to 69 I'am feeling it lol. Looks like you do nice work with no experience, keep up the good work. Aren't these tks fun!

take care---------Kimble

[jdl71]

Does anyone make a complete floor for these truck? Rocker to rocker? I can't remember seeing one. I think that's what your friend is thinking of, like buying an entire floor for a muscle car and replacing it all in one piece.

[Captainfab]

That is Exactly what is being discussed here......an aftermarket compete replacement cab floor. There is a pic of one in Robert Haas' post

Originally Posted by jdl71

Does anyone make a complete floor for these truck? Rocker to rocker? I can't remember seeing one. I think that's what your friend is thinking of, like buying an entire floor for a muscle car and replacing it all in one piece.

[jdl71]

Originally Posted by Captainfab

That is Exactly what is being discussed here......an aftermarket compete replacement cab floor. There is a pic of one in Robert Haas' post

That's what I thought, but I've apparently never seen them in the catalogs before or if I did, didn't notice.

[Bigd18]

Originally Posted by jdl71

Does anyone make a complete floor for these truck? Rocker to rocker? I can't remember seeing one. I think that's what your friend is thinking of, like buying an entire floor for a muscle car and replacing it all in one piece.

LMC shows a complete floor in their catalog.

[rvrfoot]

Originally Posted by bigd18

lmc shows a complete floor in their catalog.

brothers has them as well.