Rust Free K/5 Windshield Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 05-28-2018, 01:56 PM

I have a windshield frame cut down low on the pillars that is in good shape. What are they worth these days?

**jimer1964** · 05-28-2018, 02:39 PM

Tim rust free no extra holes? $250 -$300 range I would think? But there I go thinking!

**special-K** · 05-28-2018, 05:12 PM

Yeah, just the hole for the windshield. I should take a picture. I think it's the whole a-pillar.

*Harlowhead1972* · 05-28-2018, 07:11 PM

Hi Tim, $350-400 range. The last one I sold went for $500 shipped. Had just over $100 in the packing & shipping. Harlow

**special-K** · 05-29-2018, 09:00 AM

Thanks. Been a while since I looked at any. I know many are showing up rust there now. I dug it out and now wondering if I'll keep it or sell. It's a hunk to ship for sure.

**special-K** · 06-08-2018, 08:52 AM

Ok, time to revise this thread. How much would a very clean, but has a couple holes upper/inner frame near center, be worth?

**special-K** · 06-08-2018, 08:57 AM

...

**special-K** · 06-09-2018, 07:42 AM

$200? Be honest, less? I've been out of K/5s for a while and I know that crowd is picky.

*Harlowhead1972* · 06-09-2018, 08:07 AM

Any rust through is tough. I would say $200 is fair since it's mostly solid and some are so far gone. Harlow

**too much stuff** · 06-09-2018, 09:58 AM

I would also think in the $200 range. If you had it stripped or blasted it could be worth more, or quite a bit less if more holes pop up.

**special-K** · 06-11-2018, 09:33 AM

Thanks you all. I was thinking either a bit cheaper as is or strip to honest metal for more or scrap. It used to be rust free

.

**a1vintage69** · 06-18-2018, 11:00 PM

When I was looking for one a few weeks ago a member offered me his for $150 + shipping that would be around $75 or more. it had a couple extra holes but looked solid. Tim, yours is nicer than the one I was offered. so maybe $250-$275 shipped or more. Just a guess.

**special-K** · 06-19-2018, 07:51 AM

Thanks for that. With it being worth less than a prime piece I may keep holding on to it. I have another idea to use it with, if that ever happens. I'd be happy with a couple hundred, nothing to sneeze at, but we all know what storage time does for this stuff... if you have the free space.

05-28-2018, 01:56 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Rust Free K/5 Windshield Frame I have a windshield frame cut down low on the pillars that is in good shape. What are they worth these days? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-28-2018, 02:39 PM	#2
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Rust Free K/5 Windshield Frame Tim rust free no extra holes? $250 -$300 range I would think? But there I go thinking!

05-28-2018, 05:12 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame Yeah, just the hole for the windshield. I should take a picture. I think it's the whole a-pillar. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-28-2018, 07:11 PM	#4
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: Rust Free K/5 Windshield Frame Hi Tim, $350-400 range. The last one I sold went for $500 shipped. Had just over $100 in the packing & shipping. Harlow

05-29-2018, 09:00 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame Thanks. Been a while since I looked at any. I know many are showing up rust there now. I dug it out and now wondering if I'll keep it or sell. It's a hunk to ship for sure. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-08-2018, 08:52 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame Ok, time to revise this thread. How much would a very clean, but has a couple holes upper/inner frame near center, be worth? Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-08-2018, 08:57 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame ... Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-09-2018, 07:42 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame $200? Be honest, less? I've been out of K/5s for a while and I know that crowd is picky. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-09-2018, 08:07 AM	#9
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: Rust Free K/5 Windshield Frame Any rust through is tough. I would say $200 is fair since it's mostly solid and some are so far gone. Harlow

06-09-2018, 09:58 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Rust Free K/5 Windshield Frame I would also think in the $200 range. If you had it stripped or blasted it could be worth more, or quite a bit less if more holes pop up. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-11-2018, 09:33 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame Thanks you all. I was thinking either a bit cheaper as is or strip to honest metal for more or scrap. It used to be rust free . __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-18-2018, 11:00 PM	#12
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,013	Re: Rust Free K/5 Windshield Frame When I was looking for one a few weeks ago a member offered me his for $150 + shipping that would be around $75 or more. it had a couple extra holes but looked solid. Tim, yours is nicer than the one I was offered. so maybe $250-$275 shipped or more. Just a guess.

06-19-2018, 07:51 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rust Free K/5 Windshield Frame Thanks for that. With it being worth less than a prime piece I may keep holding on to it. I have another idea to use it with, if that ever happens. I'd be happy with a couple hundred, nothing to sneeze at, but we all know what storage time does for this stuff... if you have the free space. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.