Look what happened to my parking brake strut bar. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desert-rat · 05-31-2018, 02:53 PM

I guess it came off somehow or not done correctly. Found out my back brakes were doing nothing. So I started to replace the cylinders and found this just hanging from one end. Where can I find this?? Can't find the same one. Thanks.

demian5 · 05-31-2018, 02:56 PM

Bend it back and reuse it. No harm in that.

**Steeveedee** · 05-31-2018, 03:21 PM

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=146

**leddzepp** · 05-31-2018, 03:33 PM

My guess is that it was installed backwards, which caused that ground down spot. I just did my rear brakes, you are working on a Dana 60 correct? That bar isn’t bent, those tabs at the end are supposed to be curled like that.

desert-rat · 05-31-2018, 09:03 PM

Quote:

Originally Posted by leddzepp

My guess is that it was installed backwards, which caused that ground down spot. I just did my rear brakes, you are working on a Dana 60 correct? That bar isn’t bent, those tabs at the end are supposed to be curled like that.

I have no idea what axle I have. Would be nice to know.

seattle gmc · 05-31-2018, 06:49 PM

The exact same thing happened to me. The strut bent in the middle and rubbed on the housing. I dont think it was installed incorectly as this style is left and right specific. You cant just flip them like the generic strut that was posted in the lmc link. I foung a replace ment off of a square body 3/4 ton in the junk yard. Also those generic type replacements and a different length than the originals.

seattle gmc · 05-31-2018, 06:53 PM

Here is the thread i started when i noticed my parking strut was bent. The bent strut was on the driverside rear, the other pic was passenger side rear.

http://67-72chevytrucks.com/vboard/s...d.php?t=629400

desert-rat · 05-31-2018, 09:05 PM

Quote:

Originally Posted by seattle gmc

Here is the thread i started when i noticed my parking strut was bent. The bent strut was on the driverside rear, the other pic was passenger side rear.

http://67-72chevytrucks.com/vboard/s...d.php?t=629400

That's crazy. My passenger side was bent, a slight curve, but enough to rub the hub. So I just hammered it back straight and bam, no more rubbing.

**kwmech** · 05-31-2018, 10:32 PM

Personally I'd weld it up and flap disc it back down smooth

**Steeveedee** · 05-31-2018, 11:07 PM

Quote:

Originally Posted by seattle gmc

The exact same thing happened to me. The strut bent in the middle and rubbed on the housing. I dont think it was installed incorectly as this style is left and right specific. You cant just flip them like the generic strut that was posted in the lmc link. I foung a replace ment off of a square body 3/4 ton in the junk yard. Also those generic type replacements and a different length than the originals.

It's good to know that the generic strut is not specific to a side. The fact that the factory part has that 90º bend is for strength, as designed by GM. I won't recommend the LMC part anymore. I do suspect that if I knew where to look, a genuine GM part type could be found.

**kwmech** · 06-01-2018, 12:53 AM

Why is the wheel stud backed out in the pic

desert-rat · 06-01-2018, 02:39 AM

Quote:

Originally Posted by kwmech

Why is the wheel stud backed out in the pic

I guess thats the way the 3/4 ton axle is.

05-31-2018, 02:53 PM	#1
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 379	Look what happened to my parking brake strut bar. I guess it came off somehow or not done correctly. Found out my back brakes were doing nothing. So I started to replace the cylinders and found this just hanging from one end. Where can I find this?? Can't find the same one. Thanks. Attached Images

05-31-2018, 02:56 PM	#2
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,178	Re: Look what happened to my parking brake strut bar. Bend it back and reuse it. No harm in that. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

05-31-2018, 03:21 PM	#3
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,833	Re: Look what happened to my parking brake strut bar. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=146 __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

05-31-2018, 03:33 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,084	Re: Look what happened to my parking brake strut bar. My guess is that it was installed backwards, which caused that ground down spot. I just did my rear brakes, you are working on a Dana 60 correct? That bar isn’t bent, those tabs at the end are supposed to be curled like that. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

05-31-2018, 06:49 PM	#6
seattle gmc Registered User Join Date: Dec 2013 Location: Seattle, WA Posts: 155	Re: Look what happened to my parking brake strut bar. The exact same thing happened to me. The strut bent in the middle and rubbed on the housing. I dont think it was installed incorectly as this style is left and right specific. You cant just flip them like the generic strut that was posted in the lmc link. I foung a replace ment off of a square body 3/4 ton in the junk yard. Also those generic type replacements and a different length than the originals. __________________ 1970 GMC K2500 aka MaTeR 2007 Chevy Silverado 1500HD Classic

05-31-2018, 06:53 PM	#7
seattle gmc Registered User Join Date: Dec 2013 Location: Seattle, WA Posts: 155	Re: Look what happened to my parking brake strut bar. Here is the thread i started when i noticed my parking strut was bent. The bent strut was on the driverside rear, the other pic was passenger side rear. http://67-72chevytrucks.com/vboard/s...d.php?t=629400 __________________ 1970 GMC K2500 aka MaTeR 2007 Chevy Silverado 1500HD Classic

05-31-2018, 10:32 PM	#9
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,688	Re: Look what happened to my parking brake strut bar. Personally I'd weld it up and flap disc it back down smooth

06-01-2018, 12:53 AM	#11
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,688	Re: Look what happened to my parking brake strut bar. Why is the wheel stud backed out in the pic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.