The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-05-2018, 03:13 PM   #1
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
Wiper motor replacement

Greetings to one and all. Hope the holiday has been good to everyone and all fingers are still attached. I replaced the wiper motor on my 78 GMC STEPSIDE since the current motor would not stop spraying water. The reman wiper motor from summit worked fine while I was testing it. Then it blew the fuse and another fuse and another fuse. I only switched motors, why is it blowing fuses? The reman wiper motor doesn’t run at all now. I put the original back on and now it’s not running either. It’s summer in N.C. and it will rain. I need dependable wipers, your help is appreciated. St1
Posted via Mobile Device
st1 is offline   Reply With Quote
Old 07-05-2018, 03:19 PM   #2
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
Re: Wiper motor replacement

Fuses are blowing when you power the wipers on?
Blowing out just as soon as you plug one in with the ignition on?
Does the fuse blow with the wiper motor plugs disconnected?
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Old 07-05-2018, 03:20 PM   #3
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
The fuses blow as I test the motor. Trying to get the arms in the correct parked position. The run I shut it off the don’t run again.
st1 is offline   Reply With Quote
Old 07-05-2018, 03:24 PM   #4
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
Re: Wiper motor replacement

I am going to leave the fuse out reset the arms to the correct parked position then install a fuse and see what happens. I have reinstalled the motor that will not stop spraying water. I routed the hoses in a loop so as to not make a mess.
Posted via Mobile Device
st1 is offline   Reply With Quote
Old 07-06-2018, 07:28 PM   #5
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
So I had to put the old one back on. The reman unit will not run. I will send it back and get another one. Putting the grill back on and calling it done. Grill reinstalled due to another project (a/c charge and trianry switch install).

Thanks for the reply.
Posted via Mobile Device
st1 is offline   Reply With Quote
Old 07-21-2018, 02:25 PM   #6
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
Got the new reman wiper motor installed with some paint. Looks okay.
Posted via Mobile Device
st1 is offline   Reply With Quote
Old 07-21-2018, 02:27 PM   #7
st1
Registered User
 
st1's Avatar
 
Join Date: Oct 2005
Location: Jacksonville, NC
Posts: 224
Pics
Posted via Mobile Device
Attached Images
     
st1 is offline   Reply With Quote
Old 07-23-2018, 11:35 AM   #8
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
Re: Wiper motor replacement

That looks really nice. Hope you get some years out of it. I recently replaced the wiper motor/pump on my 78 and it worked fine for a few weeks, then started squirting for as long as the wipers were on. Had to pull the water supply hose. I'm hoping to find a better one than O'Reilley's sells next time around.
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 07-28-2018, 03:29 PM   #9
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
Re: Wiper motor replacement

A Dorman 603-131 tank with the AC Delco 89001120 pump are the stock 85/86 CK parts. IIRC the tank fit on my 1976 washer tank mount.

Rather than the Tee you can use a Wye in the washer fluid lines to avoid the U shaped bend. VW # 1J0955873D will work if you can't find one on the HELP rack.


The 98-07 GMT800 washer pump and reservoir GM 1288113 will likely fit next to the radiator on the radiator support. They hold around a gallon of fluid. You'll need to liberate the Metripack connector from your donor but these look fairly attractive to me.
The other part that might be attractive is the combination Washer and rad overflow tanks off the later model GM Astro Safari vans.
Take your tape measure to the Pick-N-Pull.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.

Last edited by hatzie; 07-28-2018 at 03:46 PM.
hatzie is offline   Reply With Quote
Old 07-28-2018, 06:12 PM   #10
MikeB
Senior Member
 
MikeB's Avatar
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,597
Re: Wiper motor replacement

Quote:
Originally Posted by hatzie View Post
A Dorman 603-131 tank with the AC Delco 89001120 pump are the stock 85/86 CK parts. IIRC the tank fit on my 1976 washer tank mount.
That's good to know.

Quote:
Rather than the Tee you can use a Wye in the washer fluid lines to avoid the U shaped bend. VW # 1J0955873D will work if you can't find one on the HELP rack.
Wow, $12 for that little guy. My setup works as good or better than the Rube Goldberg OE pump, so I'll stick with my tee fitting.

Forgot to say the way it works is I just push the OE pump button for as long as I want the pump to run. Looked into a 12 volt timer to make the pump run for a few seconds after pushing the button, but it was kinda pricey.
__________________
Mike
1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
MikeB is offline   Reply With Quote
Old 07-28-2018, 11:16 PM   #11
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
Re: Wiper motor replacement

Those Wyes are in the A2, A3, A4, A5, and A6 Jettas, Golfs, and Rabbits. The B5, B6, & B7 chassis and the Faux Beetle. The Audi models based on the VW A chassis had em as well. Just snag one used.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com