The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-25-2018, 11:02 AM   #1
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
1955 Ignition Switch

New to the forum and had a question. Installing a 350 crate motor in my 1955 2nd series truck and wanted to know which ignition switch would work for the new set up? Looks like with the PO wiring job I will be rewiring the truck completely.
Attached Images
  
talmadgemoss is offline   Reply With Quote
Old 07-25-2018, 11:26 AM   #2
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: 1955 Ignition Switch

I installed this switch, Removed my tumbler from my 6 Cylinder and installed in this unit.

https://www.classicparts.com/1955-59...ctinfo/53-411/

You could also run the universol if you have no need for the correct style of key.

https://www.classicparts.com/1947-59...ctinfo/53-441/
__________________
1959 Chevy Apache 3100/ 283 TBI / 4L60E
My YouTube:
https://www.youtube.com/mikebtte
mikebte is offline   Reply With Quote
Old 07-25-2018, 11:42 AM   #3
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

Thanks that's what I'll get. I was looking at one about three times the cost at summit.
talmadgemoss is offline   Reply With Quote
Old 07-25-2018, 01:08 PM   #4
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: 1955 Ignition Switch

Of course the stock ignition switch would work too.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 07-25-2018, 01:56 PM   #5
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

I was unaware of that? I was under the impression that changing from the foot pedal starter to the new starter that would need to be replaced.
talmadgemoss is offline   Reply With Quote
Old 07-25-2018, 02:21 PM   #6
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: 1955 Ignition Switch

Quote:
Originally Posted by talmadgemoss View Post
I was unaware of that? I was under the impression that changing from the foot pedal starter to the new starter that would need to be replaced.
You simply put a push button to start it, did it in mine years ago, done deal.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 07-25-2018, 02:17 PM   #7
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: 1955 Ignition Switch

Quote:
Originally Posted by MARTINSR View Post
Of course the stock ignition switch would work too.Brian
with a push button to replace the foot button. When I converted mine I hid it under the dash to give any thieves a little challenge.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 07-25-2018, 02:33 PM   #8
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: 1955 Ignition Switch

Originally, I installed a push button on the floor out of a tractor that was electric. Filled the spot on the floor and I had a foot start button. Got tired of it and I now have key switch. I wired my neutral safety switch to a toggle for security measures.
__________________
1959 Chevy Apache 3100/ 283 TBI / 4L60E
My YouTube:
https://www.youtube.com/mikebtte
mikebte is offline   Reply With Quote
Old 07-25-2018, 02:39 PM   #9
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
Re: 1955 Ignition Switch

silly question, unrelated. what kind of front end is that sitting on the floor next to the truck?
if planning an ifs crossmember you really should support the frame at the front where the original cross member was removed. otherwise the frame can flex or move as you work and get things messed up.
dsraven is offline   Reply With Quote
Old 07-25-2018, 02:42 PM   #10
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
Re: 1955 Ignition Switch

also suggest to keep the trans member in place till the new part is installed, tghen use some sort of support there so the front cab mounts will still have integrity. otherwise door gaps and fender fitment can be affected from frame flex causing the cab to move a bit.
just my thoughts.
body looks to be in great shape, is that how you got it?
rewire is a great idea, then you know what you have.
dsraven is offline   Reply With Quote
Old 07-25-2018, 02:55 PM   #11
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

Thanks for the advice. That is where I left it for the week. I will be support it before removing the front axle.

The IFS is from checkered racing with double adjustable coil overs and 2'' drop spindles.

Yes it was as it is. I've only had the truck for about 6 weeks' now and it had the 235 and three speed with column sifter. Engine, shifter and clutch all needed attention so I chose the this route. Hoping to get a very highway and street friendly truck. I started a build post also today.
Attached Images
 
talmadgemoss is offline   Reply With Quote
Old 07-26-2018, 01:22 AM   #12
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,709
Re: 1955 Ignition Switch

I'd think the switch swap or push button might depen a lot on what condition the switch in it now is in. The push button is the simple under 10 buck fix that also acts to keep someone from accidentally starting the truck if the key is in it as when you are working on it in the garage or driveway and there are others including kids around.

On the front crossmember, I am wondering why you would remove that to install an independent crossmember. Most after market crossmembers clear the stock front one with plenty of room. Square tube installed in it's place at the front? Instructions from the front suspension builder? Curiosity has me a bit there.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 07-26-2018, 07:16 AM   #13
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

Mr48chev To be honest this is my first go round installing an IFS, but I have help from a friend and we are boxing in the frame. He has installed several and owns a shop that does them often. I'm relying mainly on his experience with the IFS.
talmadgemoss is offline   Reply With Quote
Old 07-26-2018, 07:36 AM   #14
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

Also being we are talking about the IFS I do have another question. Can I run a 15 x 7 wheels with a 4'' back space and clear the disc brakes (11'' rotors)? Also going to running a power rack.
talmadgemoss is offline   Reply With Quote
Old 07-26-2018, 01:08 PM   #15
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,709
Re: 1955 Ignition Switch

Quote:
Originally Posted by talmadgemoss View Post
Mr48chev To be honest this is my first go round installing an IFS, but I have help from a friend and we are boxing in the frame. He has installed several and owns a shop that does them often. I'm relying mainly on his experience with the IFS.
That works, we just aren't used to seeing someone remove that crossmember without at least putting a temporary brace across the rails to maintain position.

On the wheels I ran 14 x 7 wheels on the front of my 48 with 11 inch Chevelle rotors using a 1/4 inch spacer. You shouldn't have an issue with 15x7 wheels designed for Disk brakes from the get go. You have to watch the back spacing on the rear to keep the tires out away from the sides of the bed and then again if you run wider wheels and tires it is a juggling act to space them right between the bed and fender.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 07-26-2018, 11:06 PM   #16
Black_Sheep
Registered User
 
Black_Sheep's Avatar
 
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
Re: 1955 Ignition Switch

A few good options here...

http://www.tectran.com/catalog.asp?m...arter_switches
Black_Sheep is offline   Reply With Quote
Old 07-27-2018, 05:28 PM   #17
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,648
Re: 1955 Ignition Switch

I saw in your build thread that you had removed the cross member and wondered then why you did that. It shouldn't be a problem as long as you keep it from twisting or warping. I have a Scott's front suspension in my truck and I had to trim a good bit off of the front cross member to get the steering rack in. Justin at Scotts suggested that I remove it entirely but I didn't want to do that so I trimmed it until I had enough clearance. If your friend who is helping you with the upgrade has done these before he is probably aware of the rack clearance problem so decided to remove it. Just be sure that when you weld the new suspension cross member in the frame is straight.
Russell Ashley is offline   Reply With Quote
Old 07-27-2018, 07:28 PM   #18
talmadgemoss
Registered User
 
talmadgemoss's Avatar
 
Join Date: Jul 2018
Location: Chalmette, LA
Posts: 91
Re: 1955 Ignition Switch

Thanks Russ yes we talked about it today quite a bit today He does have to do some cutting and has taken all the measurements before he removed it and will leave the trans member in until its installed.
talmadgemoss is offline   Reply With Quote
Old 08-02-2018, 12:59 PM   #19
58SkuzBukit
Registered User
 
Join Date: Nov 2015
Location: Yorktown, VA
Posts: 34
Re: 1955 Ignition Switch

Attached it what I used for foot switch after sbc install... from a john deer tractor.
Attached Images
 
58SkuzBukit is offline   Reply With Quote
Old 08-02-2018, 01:04 PM   #20
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: 1955 Ignition Switch

Quote:
Originally Posted by 58SkuzBukit View Post
Attached it what I used for foot switch after sbc install... from a john deer tractor.
That is exactly what I used except in a BWD. Fits and hold in with 2 screws. Also, if you ever want to weld over, you disassemble the switch and smash the plate flat with a hammer to weld up.
__________________
1959 Chevy Apache 3100/ 283 TBI / 4L60E
My YouTube:
https://www.youtube.com/mikebtte
mikebte is offline   Reply With Quote
Old 08-02-2018, 01:29 PM   #21
58SkuzBukit
Registered User
 
Join Date: Nov 2015
Location: Yorktown, VA
Posts: 34
Re: 1955 Ignition Switch

Attached it what I used for foot switch after sbc install... from a john deer tractor.
58SkuzBukit is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com