Trucks at Sea Galley cruise night tonight. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 08-03-2018, 01:26 AM

There weren't many but these were the Chevy an GMC trucks at the Sea Galley Thursday night cruise night that is a kick off event for the Vintiques NW Nationals this weekend in Yakima.

The green and silver AD is a new one to me and I think the chopped square body has floated around the area changing hands several times over the past 20 or so years but has as far as I know never been finished.

**mr48chev** · 08-03-2018, 01:34 AM

These two were nice.

**mr48chev** · 08-03-2018, 01:41 AM

This TF 4X was just a beast. you would expect to see it running through dirt roads in the mountains a lot more than seeing it in a parking lot car show. It wasn't intimidated by the fancy show cars though.

MARTINSR · 08-03-2018, 09:52 AM

Cool, thanks for posting.

Brian

MARTINSR · 08-03-2018, 09:54 AM

A couple there are like going back in time to the eighties, the chopped one and the green and silver one with the cross bent tail gate. I forgot about those tail gates, they were "the thing" for about a week and a half. LOL

Brian

**mr48chev** · 08-03-2018, 12:53 PM

That chopped one may have been around since the 80's. There is at least one in the area chopped like that that has been around for years, changed hands who know many how many times and never seems to get finished.

Not sure on the truck with the X bead tailgate. I haven't seen it with that paint job before at any rate. That cruise night draws some of the participants at the rod run/ show this weekend and a number of locals who only show up at free cruise nights and never put their ride in a show.

I didn't think about it until I got home but one of the shops in the area that is about 20 miles the other way from me has been putting on an open house with hot dogs or burgers served up the last few years that has been drawing a lot the nicer rigs that come in early for the show. Folks can cruise down though the valley maybe hit a winery or two on the way, hang out at the open house and hit the freeway and cruise back to Yakima real easy.

08-03-2018, 01:26 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Trucks at Sea Galley cruise night tonight. There weren't many but these were the Chevy an GMC trucks at the Sea Galley Thursday night cruise night that is a kick off event for the Vintiques NW Nationals this weekend in Yakima. The green and silver AD is a new one to me and I think the chopped square body has floated around the area changing hands several times over the past 20 or so years but has as far as I know never been finished. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-03-2018, 01:34 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Trucks at Sea Galley cruise night tonight. These two were nice. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-03-2018, 01:41 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Trucks at Sea Galley cruise night tonight. This TF 4X was just a beast. you would expect to see it running through dirt roads in the mountains a lot more than seeing it in a parking lot car show. It wasn't intimidated by the fancy show cars though. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-03-2018, 09:52 AM	#4
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Trucks at Sea Galley cruise night tonight. Cool, thanks for posting. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-03-2018, 09:54 AM	#5
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Trucks at Sea Galley cruise night tonight. A couple there are like going back in time to the eighties, the chopped one and the green and silver one with the cross bent tail gate. I forgot about those tail gates, they were "the thing" for about a week and a half. LOL Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-03-2018, 12:53 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Trucks at Sea Galley cruise night tonight. That chopped one may have been around since the 80's. There is at least one in the area chopped like that that has been around for years, changed hands who know many how many times and never seems to get finished. Not sure on the truck with the X bead tailgate. I haven't seen it with that paint job before at any rate. That cruise night draws some of the participants at the rod run/ show this weekend and a number of locals who only show up at free cruise nights and never put their ride in a show. I didn't think about it until I got home but one of the shops in the area that is about 20 miles the other way from me has been putting on an open house with hot dogs or burgers served up the last few years that has been drawing a lot the nicer rigs that come in early for the show. Folks can cruise down though the valley maybe hit a winery or two on the way, hang out at the open house and hit the freeway and cruise back to Yakima real easy. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.