Chevy and GMC trucks at Vintiques NW nats today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 08-04-2018, 12:32 AM

Jean and I slipped off and spent a couple hours at the Vintiques of Yakima NW Nationals this afternoon. This is a mix of the AD, TF and square Chevy and GMC trucks that I saw. My heel and Knee were giving me fits so I didn't do as much walking as I usually do and may have missed a couple back in the camp ground area.

The 54 1=1/2 ton is real close to what my daughter wants to do with the 51 1-1/2 ton we have out back.

**mr48chev** · 08-04-2018, 12:49 AM

A few more shots of the silver and Green AD, I found out that it is local to this area today.

MARTINSR · 08-04-2018, 12:57 AM

Personally, don't get the two tone either. What in the heck are the "door handles?"

Brian

MARTINSR · 08-04-2018, 12:57 AM

Dig the flat bed, can you buy it for me?

Brian

**mr48chev** · 08-04-2018, 01:01 AM

The Orange 53 has been coming to the even every year for over 20 years, He always parks it right in that same area and I used to park along that area most years too. It's a nice truck that never changes much but is always spiffed up nicely.

**mr48chev** · 08-04-2018, 01:21 AM

The trucks inside the Sundome were on display as products of different shops around the PNW

**mr48chev** · 08-04-2018, 01:48 AM

Well I do like 67/72 trucks and that white one is a slick one at all angles.

The little black truck belongs to a member of a group of rodders that has parked in that same area for a lot of years.

The Green AD has what appears to be a vintage canopy in great shape.

**mr48chev** · 08-04-2018, 02:06 AM

A pair of genuine hop truck doors were in the swap meet area along with a 51 door. Not a whole lot of exciting stuff in the swap meet area for me but my shopping list is pretty short.

A couple more trucks over in the camp ground including a burb getting a bit of maintenance and a nifty red Elkie that spun my wheels a bit as that is one of my short list vehicles.

**mr48chev** · 08-04-2018, 02:20 AM

Ot page, well not totally OT as the engine in the rat rod roadster may have started out in an AD or a TF truck. Interesting engine with a hand made 4 carb long manifold.

Last photo in the whole batch is of a Chevelle that has belonged to my first 3 year student in high school auto shop since he was in high school. It runs a strong 454 and 4 speed and is one of the Nicest Chevelles of that year around.

He is bulding a 55 Chevy Bel Air 2 door post with a big block that is going to be as sharp as all getout.

My feet and legs gave out and we packed up and went to Valley Brewing for a beer and Tacos and sliders off our nieces food truck.

1project2many · 08-04-2018, 09:35 AM

Thanks for the photos. I like the 67-72 trucks also. Next to the early thirties stuff it's probably my favorite generation. The green/white one looked great. The all white truck was very well executed with a lot of work put in. Loved the green AD with the cap!

When I read this:

Quote:

A pair of genuine hop truck doors were in the swap meet area along with a 51 door

I thought of this "Area 51" photo:

**mr48chev** · 08-04-2018, 11:35 AM

Many of the local hop farms (hops as in beer) used fleets of AD trucks to harvest the hops up into the early 2000's. They have newer trucks or use tractors and special trailers now.

They liked the AD trucks because the hop vines would slide over the top of them real easily. The family that has Double R ranches has farmed in the valley since the 1890's and are long time hop farmers. http://doublerhop.com/

If you drink beer you have probably drank beer made with hops that they grew at one time or the other.

08-04-2018, 12:32 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Chevy and GMC trucks at Vintiques NW nats today Jean and I slipped off and spent a couple hours at the Vintiques of Yakima NW Nationals this afternoon. This is a mix of the AD, TF and square Chevy and GMC trucks that I saw. My heel and Knee were giving me fits so I didn't do as much walking as I usually do and may have missed a couple back in the camp ground area. The 54 1=1/2 ton is real close to what my daughter wants to do with the 51 1-1/2 ton we have out back. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 12:49 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today A few more shots of the silver and Green AD, I found out that it is local to this area today. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 12:57 AM	#3
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Chevy and GMC trucks at Vintiques NW nats today Personally, don't get the two tone either. What in the heck are the "door handles?" Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-04-2018, 12:57 AM	#4
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Chevy and GMC trucks at Vintiques NW nats today Dig the flat bed, can you buy it for me? Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-04-2018, 01:01 AM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today The Orange 53 has been coming to the even every year for over 20 years, He always parks it right in that same area and I used to park along that area most years too. It's a nice truck that never changes much but is always spiffed up nicely. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 01:21 AM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today The trucks inside the Sundome were on display as products of different shops around the PNW Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 01:48 AM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today Well I do like 67/72 trucks and that white one is a slick one at all angles. The little black truck belongs to a member of a group of rodders that has parked in that same area for a lot of years. The Green AD has what appears to be a vintage canopy in great shape. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 02:06 AM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today A pair of genuine hop truck doors were in the swap meet area along with a 51 door. Not a whole lot of exciting stuff in the swap meet area for me but my shopping list is pretty short. A couple more trucks over in the camp ground including a burb getting a bit of maintenance and a nifty red Elkie that spun my wheels a bit as that is one of my short list vehicles. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 02:20 AM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today Ot page, well not totally OT as the engine in the rat rod roadster may have started out in an AD or a TF truck. Interesting engine with a hand made 4 carb long manifold. Last photo in the whole batch is of a Chevelle that has belonged to my first 3 year student in high school auto shop since he was in high school. It runs a strong 454 and 4 speed and is one of the Nicest Chevelles of that year around. He is bulding a 55 Chevy Bel Air 2 door post with a big block that is going to be as sharp as all getout. My feet and legs gave out and we packed up and went to Valley Brewing for a beer and Tacos and sliders off our nieces food truck. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-04-2018, 11:35 AM	#11
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Chevy and GMC trucks at Vintiques NW nats today Many of the local hop farms (hops as in beer) used fleets of AD trucks to harvest the hops up into the early 2000's. They have newer trucks or use tractors and special trailers now. They liked the AD trucks because the hop vines would slide over the top of them real easily. The family that has Double R ranches has farmed in the valley since the 1890's and are long time hop farmers. http://doublerhop.com/ If you drink beer you have probably drank beer made with hops that they grew at one time or the other. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.