Need help identifying bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NorthernMatthew · 08-28-2018, 11:15 PM

Hello fellow enthusiasts, I have a small collection of bolts and I’m hoping some of you might be able to chime in on what they might be for. Specifically I’m hoping some are for the fastening of my double wall hard top which has been off the K5 since 1995. Any advice is welcome.

**1rippen6** · 08-28-2018, 11:28 PM

I would say the 6 long ones are close but I believe you need 10.

NorthernMatthew · 08-29-2018, 12:08 AM

Quote:

Originally Posted by 1rippen6

I would say the 6 long ones are close but I believe you need 10.

Thanks for that, it’s the 2nd time I’ve been told I’d need 10. Does anyone have one and we can compare dimensions?

**DeadheadNM** · 08-29-2018, 07:26 AM

It's either those at the 4" position or 6" and I lean 4" - maybe someone here has easy access to double wall top to check.

Those at 8" are for the rear of the driver side front bucket seat tracks. Don't lose those.

NorthernMatthew · 08-29-2018, 12:30 PM

Quote:

Originally Posted by DeadheadNM

It's either those at the 4" position or 6" and I lean 4" - maybe someone here has easy access to double wall top to check.

Those at 8" are for the rear of the driver side front bucket seat tracks. Don't lose those.

Thanks Pete, it would seem that the folks that painted the Blazer in ‘95 switched some bolts around on me. I will try to correct that when the seats get redone. Now that I think about it, the bolts holding down the rear seat aren’t the same. Now I’m wondering if some of the hard top bolts have been used in other places!

**richard2717** · 08-29-2018, 03:51 PM

When it cools down later this evening I will try to remove one of my DW top bolts and get a pic with measurements

**richard2717** · 08-29-2018, 07:53 PM

Matt
they are 5/16 fine thread and are 1" from under the washer to the tip. here is one of mine

Richard

08-28-2018, 11:15 PM	#1
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Need help identifying bolts Hello fellow enthusiasts, I have a small collection of bolts and I’m hoping some of you might be able to chime in on what they might be for. Specifically I’m hoping some are for the fastening of my double wall hard top which has been off the K5 since 1995. Any advice is welcome. Attached Images

08-28-2018, 11:28 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Need help identifying bolts I would say the 6 long ones are close but I believe you need 10.

08-29-2018, 07:26 AM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Need help identifying bolts It's either those at the 4" position or 6" and I lean 4" - maybe someone here has easy access to double wall top to check. Those at 8" are for the rear of the driver side front bucket seat tracks. Don't lose those. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-29-2018, 03:51 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Need help identifying bolts When it cools down later this evening I will try to remove one of my DW top bolts and get a pic with measurements __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

08-29-2018, 07:53 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Need help identifying bolts Matt they are 5/16 fine thread and are 1" from under the washer to the tip. here is one of mine Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.