Fluid recommendations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jstock85 · 09-17-2018, 10:20 AM

Just about Got the wiring buttoned up this weekend and have a couple questions before I attempt to fire it up. Can I use regular Pennzoil 5w-30 to break in the engine without using the lead additive? Ive been told to use Dex Cool antifreeze only. Is this true and can anyone share some info?

4.8 stock rebuild

Thanks

ls1nova71 · 09-17-2018, 10:31 AM

Unless you have a completely sealed cooling system, which means basically using the factory surge tank and everything that goes along with it, I wouldn't use Dexcool. Using Dexcool in a system vented to the atmosphere will cause it to turn to mud anywhere it comes in contact with air, such as the vent hose near the radiator cap. I have personally seen it happen on my own vehicle, but never had a problem with the old fashioned green stuff.

Jstock85 · 09-17-2018, 01:39 PM

So im good using regular ole prestone mixed with some water?

BR3W CITY · 09-17-2018, 06:11 PM

Yep, or you can run just RO water with an additive in summer (not for winter storage). I've run water, or regular green stuff in any vented system.

People will argue about oil all day (Kinda the idea behind Bob Is The Oil Guy's page) but for the most part you can run any 5w30 syn you want safely in an LS motor. There are certain arguments against Royal Purple due to its observed viscosity thinning and causing oil consumption. I've Run Pennzoil, Redline, Castrol, German Castrol, Valvoline, and a few other brands that are made by those already named.

Jstock85 · 09-17-2018, 06:58 PM

Ive heard a few arguments against synthetic for the first 1000 miles. I use Pennzoil unltra synthetic 5w30 in my daily driver. You think I'm ok with that also or should I go mineral oil then switch to synthetic?

BR3W CITY · 09-17-2018, 11:32 PM

Since your talking about break-in, yea. You don't need to necessarily buy a "break in oil" though. FWIW, Napa branded oil is just Valvoline so if you need to go through a few jugs, its a cheap decent dino oil.

Jstock85 · 09-18-2018, 07:29 AM

Ok thanks!

**Clyde65** · 09-19-2018, 04:49 PM

I have always used the Amsoil OE oil in my LS and now in my LT, they also have break in oil as well.
Don’t contaminate your engine with regular oil, use the synthetic break in oil and then the 5w30 full synthetic.

**nsb29** · 09-20-2018, 08:11 AM

Flat tappet cam‘s in the old motors needed a break in oil with zinc but motors with roller cams it is not necessary but would not start out with A synthetic oil you want to let the rings have time to Seat properly Clyde brought up using a synthetic break in oil honestly I did not know they made a synthetic break in oil have always Used a non-synthetic for break-in and then switch to synthetic

Jstock85 · 09-20-2018, 10:54 AM

im going to check into synthetic break in oil. May go with that otherwise I will use Pennzoil straight 30 weight then switch to Pennzoil synthetic once the time comes.

**Clyde65** · 09-20-2018, 12:05 PM

https://www.amsoil.com/shop/by-produ...?code=BRKQT-EA

Jstock85 · 09-20-2018, 01:42 PM

Quote:

Originally Posted by Clyde65

https://www.amsoil.com/shop/by-produ...?code=BRKQT-EA

That looks like what ill need!

09-17-2018, 10:20 AM	#1
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Fluid recommendations Just about Got the wiring buttoned up this weekend and have a couple questions before I attempt to fire it up. Can I use regular Pennzoil 5w-30 to break in the engine without using the lead additive? Ive been told to use Dex Cool antifreeze only. Is this true and can anyone share some info? 4.8 stock rebuild Thanks

09-17-2018, 10:31 AM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Fluid recommendations Unless you have a completely sealed cooling system, which means basically using the factory surge tank and everything that goes along with it, I wouldn't use Dexcool. Using Dexcool in a system vented to the atmosphere will cause it to turn to mud anywhere it comes in contact with air, such as the vent hose near the radiator cap. I have personally seen it happen on my own vehicle, but never had a problem with the old fashioned green stuff. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

09-17-2018, 01:39 PM	#3
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Fluid recommendations So im good using regular ole prestone mixed with some water?

09-17-2018, 06:11 PM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fluid recommendations Yep, or you can run just RO water with an additive in summer (not for winter storage). I've run water, or regular green stuff in any vented system. People will argue about oil all day (Kinda the idea behind Bob Is The Oil Guy's page) but for the most part you can run any 5w30 syn you want safely in an LS motor. There are certain arguments against Royal Purple due to its observed viscosity thinning and causing oil consumption. I've Run Pennzoil, Redline, Castrol, German Castrol, Valvoline, and a few other brands that are made by those already named. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

09-17-2018, 06:58 PM	#5
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Fluid recommendations Ive heard a few arguments against synthetic for the first 1000 miles. I use Pennzoil unltra synthetic 5w30 in my daily driver. You think I'm ok with that also or should I go mineral oil then switch to synthetic?

09-17-2018, 11:32 PM	#6
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fluid recommendations Since your talking about break-in, yea. You don't need to necessarily buy a "break in oil" though. FWIW, Napa branded oil is just Valvoline so if you need to go through a few jugs, its a cheap decent dino oil. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

09-18-2018, 07:29 AM	#7
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Fluid recommendations Ok thanks!

09-19-2018, 04:49 PM	#8
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Fluid recommendations I have always used the Amsoil OE oil in my LS and now in my LT, they also have break in oil as well. Don’t contaminate your engine with regular oil, use the synthetic break in oil and then the 5w30 full synthetic. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-20-2018, 08:11 AM	#9
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Fluid recommendations Flat tappet cam‘s in the old motors needed a break in oil with zinc but motors with roller cams it is not necessary but would not start out with A synthetic oil you want to let the rings have time to Seat properly Clyde brought up using a synthetic break in oil honestly I did not know they made a synthetic break in oil have always Used a non-synthetic for break-in and then switch to synthetic

09-20-2018, 10:54 AM	#10
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Fluid recommendations im going to check into synthetic break in oil. May go with that otherwise I will use Pennzoil straight 30 weight then switch to Pennzoil synthetic once the time comes.

09-20-2018, 12:05 PM	#11
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Fluid recommendations https://www.amsoil.com/shop/by-produ...?code=BRKQT-EA __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.