Best Abrasive Disk for Silicon Bronze Welding

[Driver_WT]

We are using Silicon Bronze wire in a MIG welder to weld in some patch panels and weld up the center seam in the hood. Any recommendations on the best abrasive disk (for my grinder) for grinding down the silicon bronze weld?

Thanks.

Wade

[iowaboynca]

Free?...Just kidding...

I'd say a couple of 40-60 grit flap disks. Try to move around and take breaks to keep the heat down.

[MARTINSR]

I will add to Iowaboy, as I put in my "Basics of Basics" when referring to sand paper when blocking primer or bondo, you want NEW, SHARP, QUALITY discs so you CUT the weld and not polish it! CUTTING the weld quick reduces heat, it reduces damage because you can locate JUST what you want to remove easily.

Brian

[Driver_WT]

Originally Posted by MARTINSR

I will add to Iowaboy, as I put in my "Basics of Basics" when referring to sand paper when blocking primer or bondo, you want NEW, SHARP, QUALITY discs so you CUT the weld and not polish it! CUTTING the weld quick reduces heat, it reduces damage because you can locate JUST what you want to remove easily.

Brian

Any special discs you would recommend Brian for silicon bronze?

Wade

[MARTINSR]

Originally Posted by Driver_WT

Any special discs you would recommend Brian for silicon bronze?

Wade

Nope, I use 3m and Winzer.

Brian

[mongocanfly]

3M roloc disc work great...you can quickly change grits and the scorchbrite disc and bristle disc also fit the same backing pad...