NJ WTB Need lower clutch rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-22-2018, 07:00 PM

Finally putting together some of the last pieces of my 65 project only to find out I have the wrong clutch fork push rod. See pic below of the part I need (not the z bar, just the rod).

If any one has one please post pic & price shipping to 08753.

Really appreciate any help on this part.

Thanks
Scott

**PGSigns** · 10-23-2018, 07:41 AM

Scott I will look tonight. I just pulled the entire setup off a GMC that I am parting.
Jimmy

**ScottH** · 10-23-2018, 09:33 AM

Thanks Jimmy

**PGSigns** · 10-24-2018, 06:28 AM

Scott I have a couple in a box and do you have a length to make sure I have the correct one?
Jimmy

**ScottH** · 10-24-2018, 12:04 PM

Jimmy, part of my problem is I'm not sure of the length. When I got the 65 a PO had installed a V8 in the forward position. He then modified (that's being nice, hacked is more like it) the clutch linkage, floor, etc. to work in the wrong position. I put the engine in the rear position where its supposed to be.

Long story short the rod that was in the truck is now way too short. I did a quick measurement & a best guess is around 12" (give or take) should work.

Sorry 4 the long explanation, hope that helps.

Thanks
Scott

**PGSigns** · 10-25-2018, 06:55 AM

I should have it. I have 4 in the box and will get pictures of the best one They are all stock stuff.
Jimmy

**ScottH** · 11-10-2018, 05:43 PM

still looking

**PGSigns** · 11-10-2018, 06:41 PM

Scott I have another one. Just got real busy and forgot to text you back. Will get you pictures in the morning.
Jimmy

10-22-2018, 07:00 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	WTB Need lower clutch rod Finally putting together some of the last pieces of my 65 project only to find out I have the wrong clutch fork push rod. See pic below of the part I need (not the z bar, just the rod). If any one has one please post pic & price shipping to 08753. Really appreciate any help on this part. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-23-2018, 07:41 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I will look tonight. I just pulled the entire setup off a GMC that I am parting. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-23-2018, 09:33 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod Thanks Jimmy __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-24-2018, 06:28 AM	#4
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I have a couple in a box and do you have a length to make sure I have the correct one? Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-24-2018, 12:04 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod Jimmy, part of my problem is I'm not sure of the length. When I got the 65 a PO had installed a V8 in the forward position. He then modified (that's being nice, hacked is more like it) the clutch linkage, floor, etc. to work in the wrong position. I put the engine in the rear position where its supposed to be. Long story short the rod that was in the truck is now way too short. I did a quick measurement & a best guess is around 12" (give or take) should work. Sorry 4 the long explanation, hope that helps. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-25-2018, 06:55 AM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod I should have it. I have 4 in the box and will get pictures of the best one They are all stock stuff. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-10-2018, 05:43 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod still looking __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-10-2018, 06:41 PM	#8
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I have another one. Just got real busy and forgot to text you back. Will get you pictures in the morning. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.