The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-15-2018, 03:31 PM   #1
EVRLET
Registered User
 
EVRLET's Avatar
 
Join Date: Aug 2015
Location: Las Vegas NV
Posts: 371
Blazer Trailing Arm Suspension

I very rarely come to this side of the forum since I do not own a Blazer. But what peaked my interest is that the 69-72 Blazers have 104” wheelbase. Coincidentally, my 1973 P10 wheelbase is 102”. The 1973-1987 Blazers have 106.5” wheelbases.

My P10 has leafs and I really wanted to do the trailing arm swap. But when I look at the frame and length of the arms, the crossmember would literally be at the back of the tranny. For the guys who have done the conversion, where exactly does your crossmember sit in relation to the tranny? Did you have to modify the trailing arm length? I’m assuming with the very similar wheelbases, the crossmembers would be in the same location for a Blazer/P10.

Everyone says the Stepvans are on the same chassis as the SB trucks. Well I’ll tell you that’s not the case. I have a 67 SB and the frame dimensions are not the same as the P10.
__________________
Customization is what you want it to look like -- not what other people think it should look like
EVRLET is offline   Reply With Quote
Old 11-15-2018, 11:16 PM   #2
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,762
Re: Blazer Trailing Arm Suspension

I have been considering this for many years, but I don't like the bars that keep the rear end centralized. With a leaf spring suspension I wouldn't have to worry about it

Trialing arms could be made for the demension you want, heck its only sheet metal, or bars...

The crossmember that attaches the arms to the frame rails could be used and built off of that, but how do I get rid of the ugly transverse rods?

Maybe, Ill start sourcing parts and see how it fits up with 4WD
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 11-16-2018, 11:58 AM   #3
raggedjim
Senior Member
 
raggedjim's Avatar
 
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,475
Re: Blazer Trailing Arm Suspension

http://67-72chevytrucks.com/vboard/s...=635605&page=2

post 34 has 2wd blazer frame dimensions

Good luck, Rg
__________________
Roger

'68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675
'69 ('70?) 2wd Blazer
'70 GMC Jimmy 2wd
'73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203
raggedjim is offline   Reply With Quote
Old 11-17-2018, 09:31 AM   #4
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,762
Re: Blazer Trailing Arm Suspension

Thanks Rg
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 11-18-2018, 04:40 PM   #5
YBNORML
Registered User
 
YBNORML's Avatar
 
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,844
Re: Blazer Trailing Arm Suspension

Quote:
Originally Posted by EVRLET View Post
I very rarely come to this side of the forum since I do not own a Blazer. But what peaked my interest is that the 69-72 Blazers have 104” wheelbase. Coincidentally, my 1973 P10 wheelbase is 102”. The 1973-1987 Blazers have 106.5” wheelbases.

My P10 has leafs and I really wanted to do the trailing arm swap. But when I look at the frame and length of the arms, the crossmember would literally be at the back of the tranny. For the guys who have done the conversion, where exactly does your crossmember sit in relation to the tranny? Did you have to modify the trailing arm length? I’m assuming with the very similar wheelbases, the crossmembers would be in the same location for a Blazer/P10.

Everyone says the Stepvans are on the same chassis as the SB trucks. Well I’ll tell you that’s not the case. I have a 67 SB and the frame dimensions are not the same as the P10.
I have a 72' 2wd Blazer. It is a factory coil spring setup. The end of the tailshaft is with in a few inches of the crossmember. The arms and everything related to them are exactly the same as the pickups. I am running a 454 with TH400.
__________________
---------------------------------------------------------------
Jason.

68’ GMC shortbox
https://67-72chevytrucks.com/vboard/...d.php?t=794201

72' 2WD Blazer
http://67-72chevytrucks.com/vboard/s...d.php?t=425385

67' LongBox C-10
http://67-72chevytrucks.com/vboard/s...d.php?t=691845

InstaGram ybnorml67
YBNORML is offline   Reply With Quote
Old 11-29-2018, 03:41 PM   #6
preciador6
Registered User
 
Join Date: Dec 2013
Location: So Cal
Posts: 684
Re: Blazer Trailing Arm Suspension

Goes here no trans cross member
Attached Images
 
preciador6 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com