LMC Headliner Trim ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Als454 · 11-20-2003, 02:23 AM

Bought headliner trim from LMC. Tabs don't go into slots in the roof, almost seems like they are to short.

I'm very dissapointed with this product. Anyone had any experience with this.

Longhorn Man · 11-20-2003, 02:34 AM

I've heard this somewhere....post your comments on the Review Board...maybe stop someoen else from throwing away there cash.

Als454 · 11-20-2003, 02:38 AM

I had this on the review board for several days, then deleted it. No activity over there.

Mudder · 11-20-2003, 10:58 AM

They are all the same wherever you get them I bet. I didnt have the slots in my roof so I broke them off.

krazy_texan · 11-20-2003, 02:04 PM

did all headliners have trim or was the trim on higher optioned trucks cause my 72 super used to have the trim but my 71 custom had the headliner only and there is no evidence of there ever being trim up there.

REDNEKID · 11-20-2003, 02:05 PM

Quote:

Originally posted by Mudder67
They are all the same wherever you get them I bet. I didnt have the slots in my roof so I broke them off.

How did you mount it without the slots/tabs?

Mudder · 11-20-2003, 02:12 PM

Very small stainless screws. Think I used 6 total... Going after the truck in a little bit and I can check for sure.

Mudder · 11-20-2003, 02:13 PM

Longhorn Man · 11-21-2003, 12:40 AM

The headliner was only in the CST/cheyanne trucks, no option for jus tthe headliner. They all had the chrome trim.
May as well post it on the review board ...6 months from now this post will be 137 pages down on this board, but only 2 pages on the review board.

Hooter · 11-21-2003, 12:48 AM

Well said Andy, I myself would never buy anything again from those morons

BLAZERMAN · 11-21-2003, 01:32 AM

Quote:

Very small stainless screws. Think I used 6 total...

Mudder67, did you add the six screws to the trim besides the ones that are allready used, and did you use any kind of adhesive on the headliner itself? any sag since doing this? Thanks Rob

Mudder · 11-21-2003, 02:00 AM

Think maybe I may have added a couple to the ones that were supposed to be there. I used 3M and some 3M tape but it isnt stuck that good. It hard to tell its not stuck by looking at it. I will check it out tomorrow closer.

tom hand · 11-21-2003, 09:40 AM

I bought the repo trim...can't remember where I got it...but it fit perfect...no problems at all snapped right in. I glued the headliner in with 3M carpet glue. I used a piece of plywood and 2x4's wedged against the floor...let it there for a couple of days...I think you would have to destroy it to remove it

gonebad2 · 11-22-2003, 02:46 AM

Quote:

Originally posted by Hooter
Well said Andy, I myself would never buy anything again from those morons

I have never bought anything from LMC. First, I think their prices are too damn high. Second, I've heard nothing but bad stuff about them and the quality of the parts they sell.
Just my opinion...

Longhorn Man · 11-22-2003, 10:53 PM

Well, I have a pretty cool hat they sold me...actually, i have two...the firts one wore out a bit pre-maturly.

11-20-2003, 02:23 AM	#1
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	LMC Headliner Trim ? Bought headliner trim from LMC. Tabs don't go into slots in the roof, almost seems like they are to short. I'm very dissapointed with this product. Anyone had any experience with this. __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

11-20-2003, 02:38 AM	#3
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	I had this on the review board for several days, then deleted it. No activity over there. __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

11-20-2003, 02:04 PM	#5
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	did all headliners have trim or was the trim on higher optioned trucks cause my 72 super used to have the trim but my 71 custom had the headliner only and there is no evidence of there ever being trim up there. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

11-20-2003, 02:12 PM	#7
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Very small stainless screws. Think I used 6 total... Going after the truck in a little bit and I can check for sure. Last edited by Mudder; 11-20-2003 at 02:15 PM.

11-20-2003, 02:13 PM	#8
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Here it is

11-20-2003, 02:34 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I've heard this somewhere....post your comments on the Review Board...maybe stop someoen else from throwing away there cash.

11-20-2003, 10:58 AM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	They are all the same wherever you get them I bet. I didnt have the slots in my roof so I broke them off.

11-21-2003, 12:40 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The headliner was only in the CST/cheyanne trucks, no option for jus tthe headliner. They all had the chrome trim. May as well post it on the review board ...6 months from now this post will be 137 pages down on this board, but only 2 pages on the review board.

11-21-2003, 12:48 AM	#10
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	Well said Andy, I myself would never buy anything again from those morons __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

11-21-2003, 02:00 AM	#12
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Think maybe I may have added a couple to the ones that were supposed to be there. I used 3M and some 3M tape but it isnt stuck that good. It hard to tell its not stuck by looking at it. I will check it out tomorrow closer. Last edited by Mudder; 11-21-2003 at 02:05 AM.

11-21-2003, 09:40 AM	#13
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I bought the repo trim...can't remember where I got it...but it fit perfect...no problems at all snapped right in. I glued the headliner in with 3M carpet glue. I used a piece of plywood and 2x4's wedged against the floor...let it there for a couple of days...I think you would have to destroy it to remove it __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

11-22-2003, 10:53 PM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Well, I have a pretty cool hat they sold me...actually, i have two...the firts one wore out a bit pre-maturly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.