OR WTB 73-87 2wd steering box

[ddc456]

I am getting ready to start my cross over steering for my 78 one ton and i believe i need to change out my steering box to a 2wd application. Let me know what you have available and price. Shipping will be to 97702.

Thanks
Doug

[xrcr]

Not sure if you have to or not. Rebuilts are pretty easy to find and decently priced

[BLK65K10]

I have a couple of boxes. $40 plus shipping. I think one will fit in a large flat rate box so that would be $19 but I will have to double check that. Let me know if you want one. Thanks Lyle

[ddc456]

Originally Posted by BLK65K10

I have a couple of boxes. $40 plus shipping. I think one will fit in a large flat rate box so that would be $19 but I will have to double check that. Let me know if you want one. Thanks Lyle

Lyle

thank you. I think im just going to buy a refurbished unit. If something changes i'll get in touch w/ you. thanks again

[sweetk30]

been reading a lot of guys not liking the refurb quality from box store rebuilds .

lot of guys liking the full kit part #'s from places that do hydro assist or just reg boxes .

and if you ever think you might want hydro assist get the box ported for it now and just cap the ports until your ready .

i have read a lot of good on psc and close to as much on agr .

i have a 4wd agr box i got in trade for work i did with around 500 miles on it the changed to a 2wd for crossover . i can say this box is so nice compared to all my other boxes i have used .

i also did the xj jeep steering shaft mod to ditch the rag joint and flex box joint of the gm shaft .