CA Single Wall Plug and Plate/wiring.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**amcgeh01** · 01-24-2019, 11:50 PM

Hello all,

I too am looking for at least the plate for starters.. if you have the plug and wiring then that would be even better... Thanks in advance...

- A.J.

**1rippen6** · 01-25-2019, 12:13 AM

I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

**amcgeh01** · 01-25-2019, 12:21 AM

Hey Rip, Thanks for responding.. Yes, a plate for starters and I will work down from there...

Quote:

Originally Posted by 1rippen6

I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

**amcgeh01** · 01-25-2019, 12:32 AM

Also, since I am sure you have pulled a few in your day... How are the wires routed..? If you have any pics that would be great... I figure I will have to use a snake and fish it from the rear light opening.. But not sure how it's routed from the plug to the firewall...

Quote:

Originally Posted by amcgeh01

Hey Rip, Thanks for responding.. Yes, a plate for starters and I will work down from there...

**1rippen6** · 01-25-2019, 01:17 AM

I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.

NJKelly · 01-25-2019, 08:53 PM

Quote:

Originally Posted by 1rippen6

I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.

Following

01-24-2019, 11:50 PM	#1
amcgeh01 Senior Member Join Date: Jul 2009 Location: SoCal Posts: 206	Single Wall Plug and Plate/wiring.. Hello all, I too am looking for at least the plate for starters.. if you have the plug and wiring then that would be even better... Thanks in advance... - A.J. __________________ ******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks..

01-25-2019, 12:13 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

01-25-2019, 01:17 AM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.