PA 1970 misc. parts and 1967 misc k10 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ShortbedClayton** · 02-04-2019, 06:33 PM

Varity of parts from a parts truck I stripped. Nothing fancy just run if mill pieces.. just putting prices on them hope I’m not to out of line. Make offer if I’m too far off.. All prices plus shipping. Will sell lot if interested. MO only PayPal not working properly sorry for inconvience. First of is
1967 k10 glovebox door: $25
1967 k10 transfer case shifter and bracket: $35
Rest of parts are from a 1970 C10..
Bench seat brackets ( these are 1971-1972 style): $35
3 core upper rad. Brackets: $20
4 speed clutch rod: $15
Pedal stop:$10
Front clip support braces: $15
Headlight buckets and trim rings: $20 SOLD
Guage cluster: $10 SOLD
Steering column mount and band: $10 SOLD
Brake booster brace: $10
4 speed shifter( slight oxidation on end in trans but no heavy pits): $20 SOLD
Pass. Door hinges(fairly tight): $10 SOLD
Front clip wiring harness( fairly clean, didn’t see any noticeable splices): $25 SOLD
Horn: $10 SOLD
2wd fan shrowd( all mounting points intact): $20 SOLD
427 C50 hood emblems and louvers( one stud broke off on 427 emblem, more or less wall art due to pitting): $20 SOLD
Posted via Mobile Device

**ShortbedClayton** · 02-04-2019, 06:36 PM

More pics. Broken stud on 427 emblem and oxidation on 4 speed shifter end and spid label of glovebox door
Posted via Mobile Device

**ShortbedClayton** · 02-04-2019, 06:37 PM

Also have a damage free 1970 inner grille very nice original for sale as well. Will get pics if interested. $125 plus ship
Posted via Mobile Device

**leddzepp** · 02-04-2019, 06:47 PM

I’ll take the gauge cluster pending shipping cost to 92505. Thank you.

**ShortbedClayton** · 02-04-2019, 07:04 PM

Quote:

Originally Posted by leddzepp

I’ll take the gauge cluster pending shipping cost to 92505. Thank you.

Cheapest is USPS large flat rate box which I believe is $18 so $28 shipped.
Posted via Mobile Device

**anew4961** · 02-04-2019, 07:20 PM

i will take hinges

**anew4961** · 02-04-2019, 07:22 PM

fan shroud to

**anew4961** · 02-04-2019, 07:24 PM

Quote:

Originally Posted by anew4961

fan shroud to

pm total

**anew4961** · 02-04-2019, 07:27 PM

Quote:

Originally Posted by anew4961

pm total

throw the wire harness and horn in to

**ShortbedClayton** · 02-04-2019, 08:11 PM

Quote:

Originally Posted by anew4961

pm total

Pm sent. Thanks
Posted via Mobile Device

**leddzepp** · 02-04-2019, 08:01 PM

Ok, try and pad it if you can. It’s highly likely the bezel will get broken in one of those boxes, but I plan on using a new one anyways. I just want the rest of it to arrive in tact and useable.

**ShortbedClayton** · 02-04-2019, 08:03 PM

Quote:

Originally Posted by leddzepp

Ok, try and pad it if you can. It’s highly likely the bezel will get broken in one of those boxes, but I plan on using a new one anyways. I just want the rest of it to arrive in tact and useable.

Pm sent for MO address
Posted via Mobile Device

mygmctruck1 · 02-04-2019, 08:40 PM

I’ll take the steering column mount and band

**ShortbedClayton** · 02-04-2019, 08:47 PM

Quote:

Originally Posted by mygmctruck1

I’ll take the steering column mount and band

Pm sent. Thank you
Posted via Mobile Device

Kevin7723 · 02-05-2019, 12:09 AM

How much would shipping be for the headlight buckets and trim to 92056

**ShortbedClayton** · 02-05-2019, 05:44 AM

Quote:

Originally Posted by Kevin7723

How much would shipping be for the headlight buckets and trim to 92056

$10 in a flat rate box. Prefer boxes to avoid damage. $30 total
Posted via Mobile Device

Kevin7723 · 02-05-2019, 01:04 PM

Quote:

Originally Posted by ShortbedClayton

$10 in a flat rate box. Prefer boxes to avoid damage. $30 total
Posted via Mobile Device

Ill take them!

**ShortbedClayton** · 02-05-2019, 01:19 PM

Quote:

Originally Posted by Kevin7723

Ill take them!

Pm sent with MO info. Thanks

Clayton
Posted via Mobile Device

**special-K** · 02-05-2019, 07:52 AM

Hey Clayton, time for me to buy from you. I'll take the 4spd shifter. Can you do $19.75?

**ShortbedClayton** · 02-05-2019, 08:52 AM

Quote:

Originally Posted by special-K

Hey Clayton, time for me to buy from you. I'll take the 4spd shifter. Can you do $19.75?

Not everyday I can sell to a legend 😬 I’ll make ya a deal so u can make me one on some of your goodies!! Haha Am I shipping to ya or bring it along when I come hangout this spring. $25 shipped should do the trick.
Posted via Mobile Device

BaggedBurban · 02-05-2019, 08:57 AM

What year C50 did the emblems come off of?

**ShortbedClayton** · 02-05-2019, 09:06 AM

Quote:

Originally Posted by BaggedBurban

What year C50 did the emblems come off of?

I believe it was a 72. I don’t have the c50 emblems just the 427 emblems but I think we talked about the other misc. interior parts you were looking for. Supposed to rain all this weekend but I was hoping to get the the scrap yard to get them for ya. It may have been another member I was talking too about it
Posted via Mobile Device

BaggedBurban · 02-05-2019, 10:20 AM

Yes that was me. Please let me know what you find at the yard so we can work a package price on all emblems/parts. Thanks

Quote:

Originally Posted by ShortbedClayton

I believe it was a 72. I don’t have the c50 emblems just the 427 emblems but I think we talked about the other misc. interior parts you were looking for. Supposed to rain all this weekend but I was hoping to get the the scrap yard to get them for ya. It may have been another member I was talking too about it
Posted via Mobile Device

**ShortbedClayton** · 02-05-2019, 10:22 AM

Quote:

Originally Posted by BaggedBurban

Yes that was me. Please let me know what you find at the yard so we can work a package price on all emblems/parts. Thanks

I’ll try to get there within the next few weeks.
Posted via Mobile Device

**special-K** · 02-06-2019, 08:50 PM

I'm not in a hurry. Just want it to go with one of the 4spds I have to have the whole deal together. Just bring it along and I'll pay full price. I'll make that $.25 up somewhere I'm sure

02-04-2019, 06:33 PM	#1
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 705	1970 misc. parts and 1967 misc k10 parts Varity of parts from a parts truck I stripped. Nothing fancy just run if mill pieces.. just putting prices on them hope I’m not to out of line. Make offer if I’m too far off.. All prices plus shipping. Will sell lot if interested. MO only PayPal not working properly sorry for inconvience. First of is 1967 k10 glovebox door: $25 1967 k10 transfer case shifter and bracket: $35 Rest of parts are from a 1970 C10.. Bench seat brackets ( these are 1971-1972 style): $35 3 core upper rad. Brackets: $20 4 speed clutch rod: $15 Pedal stop:$10 Front clip support braces: $15 Headlight buckets and trim rings: $20 SOLD Guage cluster: $10 SOLD Steering column mount and band: $10 SOLD Brake booster brace: $10 4 speed shifter( slight oxidation on end in trans but no heavy pits): $20 SOLD Pass. Door hinges(fairly tight): $10 SOLD Front clip wiring harness( fairly clean, didn’t see any noticeable splices): $25 SOLD Horn: $10 SOLD 2wd fan shrowd( all mounting points intact): $20 SOLD 427 C50 hood emblems and louvers( one stud broke off on 427 emblem, more or less wall art due to pitting): $20 SOLD Posted via Mobile Device Attached Images Last edited by ShortbedClayton; 02-13-2019 at 08:35 PM.

02-04-2019, 06:36 PM	#2
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 705	More pics. Broken stud on 427 emblem and oxidation on 4 speed shifter end and spid label of glovebox door Posted via Mobile Device Attached Images

02-04-2019, 06:37 PM	#3
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 705	Re: 1970 misc. parts and 1967 misc k10 parts Also have a damage free 1970 inner grille very nice original for sale as well. Will get pics if interested. $125 plus ship Posted via Mobile Device

02-04-2019, 06:47 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,046	Re: 1970 misc. parts and 1967 misc k10 parts I’ll take the gauge cluster pending shipping cost to 92505. Thank you. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-04-2019, 07:20 PM	#6
anew4961 Senior Member Join Date: Jun 2017 Location: burlington north carolina Posts: 1,030	Re: 1970 misc. parts and 1967 misc k10 parts i will take hinges

02-04-2019, 07:22 PM	#7
anew4961 Senior Member Join Date: Jun 2017 Location: burlington north carolina Posts: 1,030	Re: 1970 misc. parts and 1967 misc k10 parts fan shroud to

02-04-2019, 08:01 PM	#11
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,046	Re: 1970 misc. parts and 1967 misc k10 parts Ok, try and pad it if you can. It’s highly likely the bezel will get broken in one of those boxes, but I plan on using a new one anyways. I just want the rest of it to arrive in tact and useable. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-04-2019, 08:40 PM	#13
mygmctruck1 Registered User Join Date: Jun 2018 Location: Munising,Mi Posts: 360	Re: 1970 misc. parts and 1967 misc k10 parts I’ll take the steering column mount and band

02-05-2019, 12:09 AM	#15
Kevin7723 Registered User Join Date: Dec 2018 Location: Oceanside California Posts: 34	Re: 1970 misc. parts and 1967 misc k10 parts How much would shipping be for the headlight buckets and trim to 92056 __________________ 1970 Chevy C10 Fleetside

02-05-2019, 07:52 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1970 misc. parts and 1967 misc k10 parts Hey Clayton, time for me to buy from you. I'll take the 4spd shifter. Can you do $19.75? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-05-2019, 08:57 AM	#21
BaggedBurban Registered User Join Date: Mar 2016 Location: Portland,OR Posts: 164	Re: 1970 misc. parts and 1967 misc k10 parts What year C50 did the emblems come off of?

02-06-2019, 08:50 PM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1970 misc. parts and 1967 misc k10 parts I'm not in a hurry. Just want it to go with one of the 4spds I have to have the whole deal together. Just bring it along and I'll pay full price. I'll make that $.25 up somewhere I'm sure __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.