KS Selling My K20 4WD Projects - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortstep60 · 09-09-2019, 11:55 AM

Chevy K20 60-62 frame - there are no cab mounts on it. Very straight and clean. As it sets on my trailer - $550.00.

I have a 61 GMC 4WD K20 long bed - it does not have a bed. The frame is very nice. It's a very solid truck. The only rust on it is around the top of the windshield. I have all the parts to fix it. It does not have a GMC motor. It has a SBC 350 with a fresh set of heads on it. It does run. The truck needs to be finished putting together. If you want more pictures PM me your cell and I will send you some. $1950.00 with a Kansas bill of sale.

Serious inquiries only!!

bosephus · 09-12-2019, 11:43 AM

PM sent

doo142 · 09-13-2019, 06:20 AM

Not hijacking but maybe help the sale. I have a complete GMC 351 v-6 and 4-speed with pto. Still in the frame rails so all mounts and hardware included, 51,000 miles. $500

shortstep60 · 09-14-2019, 11:32 PM

The truck is sold still have the frame for sale

**Joe P** · 09-19-2019, 09:01 PM

Quote:

Originally Posted by shortstep60

The truck is sold still have the frame for sale

Nice frame. How different is the 62 K20 frame from a 66 K20 frame? Geez I would like to have one that nice for a 66.

**aotte1** · 09-19-2019, 10:13 PM

In response to the question if this frame will work on a 66; David (shortstep60) believes it will if you use a 60-62 front bumper and use a 60-62 radiator.

David currently is unable to respond on the forum, because his computer is currently down. Hopefully he will be back up soon.

Les

1960chevypanel · 01-25-2020, 03:57 PM

Text on the way

j.kirn · 01-31-2020, 12:51 AM

Bell housing for a v8 or a 6 cylinder, lift blocks in rear have any cracks in them?

shortstep60 · 01-31-2020, 07:42 AM

I sold the trans local I will check the rest and get back with you thanks

shortstep60 · 01-31-2020, 07:49 PM

I hate to cut the frame up but if you want to give me some good money for the parts I would. Once I cut that frame I just have a pile of scrap iron. I will check on some transmission parts for you thanks

**Joe P** · 02-02-2020, 09:46 PM

Quote:

Originally Posted by shortstep60

I hate to cut the frame up but if you want to give me some good money for the parts I would. Once I cut that frame I just have a pile of scrap iron. I will check on some transmission parts for you thanks

Dave, that rear cross-member brace and the triangle gussets are worth $100 to me plus shipping. I would also be hesitant to cut the frame. It should really be preserved. If you were closer I would buy the whole thing and build it as my next project. Thanks for your courtesy... Joe P.

duallyjams · 02-03-2020, 06:17 PM

Do you have any current pictures of the frame that you could upload to this thread. The reason for asking the pictures shows the trans but you have already sold that, not sure what else is missing verses what comes with it.

1960chevypanel · 01-31-2020, 11:21 PM

Dave I think you can remove that brace by blasting the rivets. Shame to cut a good 4WD frame, they're so rare.. I'd scoop it up if I was closer.

shortstep60 · 01-31-2020, 11:42 PM

I no of a lot of 60-66 trucks around 120 parts trucks and there is no 4wd trucks. You would think living in Kansas there would be but there’s none. Parts are getting hard to find I been trying to find a nice rust free drivers side door for my 64 and I can’t find a nice one.

1960chevypanel · 01-31-2020, 11:53 PM

Will keep an eye out for a good door. Most of my trucks are 60-63. Btw some $ coming your way.

shortstep60 · 02-01-2020, 09:43 PM

The rear lift block are nice no cracks $100.00 for the set plus shipping. I have two of the three drive shafts the one from the transmission to the transfer case $50.00 rear end to transfer case $75.00

whateverpratt · 04-01-2020, 11:09 PM

It looks like you still have at least one front cab mount on the frame on the trailer. It looks like it might be a 63-66 mount. I'm interested in that mount and the other side if you have it.
My k10 frame that I recently got is a '62, and my the cab I have for it is a '63, so I'm looking for some '63-'66 k10 front cab mounts

shortstep60 · 04-02-2020, 05:59 AM

Sorry they are gone

whateverpratt · 10-12-2020, 04:30 PM

I just realized you had the steering box.
PM sent

shortstep60 · 10-16-2020, 10:17 AM

Steering box is sold to whateverpratt
I will sale the motor mount the transmission crossmember the transfer case bracket front and back spring perches. Rear drive shaft if any one needs any of them the prices are from $50.00 to $150

pete68camaro · 05-21-2020, 09:49 PM

did you sell the rear lift blocks?

thanks.

shortstep60 · 05-21-2020, 10:06 PM

No and they are nice no cracks

shortstep60 · 08-09-2020, 03:07 PM

Ttt

shortstep60 · 09-18-2020, 09:29 AM

If anyone is needing the bare frame with out cab mounts $200.00 The frame is straight and some surface rust you can text me or call me if you have any questions 785 408 6822 David

diver · 10-01-2020, 10:55 PM

hi is lift blocks not sold i will take them ..thanks butch

09-09-2019, 11:55 AM	#1
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Selling My K20 4WD Projects Chevy K20 60-62 frame - there are no cab mounts on it. Very straight and clean. As it sets on my trailer - $550.00. I have a 61 GMC 4WD K20 long bed - it does not have a bed. The frame is very nice. It's a very solid truck. The only rust on it is around the top of the windshield. I have all the parts to fix it. It does not have a GMC motor. It has a SBC 350 with a fresh set of heads on it. It does run. The truck needs to be finished putting together. If you want more pictures PM me your cell and I will send you some. $1950.00 with a Kansas bill of sale. Serious inquiries only!! Attached Images

09-12-2019, 11:43 AM	#2
bosephus Registered User Join Date: Feb 2008 Location: texas gulf coast Posts: 211	Re: Selling My K20 4WD Projects PM sent

09-13-2019, 06:20 AM	#3
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: Selling My K20 4WD Projects Not hijacking but maybe help the sale. I have a complete GMC 351 v-6 and 4-speed with pto. Still in the frame rails so all mounts and hardware included, 51,000 miles. $500 __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

09-14-2019, 11:32 PM	#4
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects The truck is sold still have the frame for sale

09-19-2019, 10:13 PM	#6
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Selling My K20 4WD Projects In response to the question if this frame will work on a 66; David (shortstep60) believes it will if you use a 60-62 front bumper and use a 60-62 radiator. David currently is unable to respond on the forum, because his computer is currently down. Hopefully he will be back up soon. Les

01-25-2020, 03:57 PM	#7
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,626	Re: Selling My K20 4WD Projects Text on the way

01-31-2020, 12:51 AM	#8
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: Selling My K20 4WD Projects Bell housing for a v8 or a 6 cylinder, lift blocks in rear have any cracks in them?

01-31-2020, 07:42 AM	#9
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects I sold the trans local I will check the rest and get back with you thanks

01-31-2020, 07:49 PM	#10
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects I hate to cut the frame up but if you want to give me some good money for the parts I would. Once I cut that frame I just have a pile of scrap iron. I will check on some transmission parts for you thanks

02-03-2020, 06:17 PM	#12
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Selling My K20 4WD Projects Do you have any current pictures of the frame that you could upload to this thread. The reason for asking the pictures shows the trans but you have already sold that, not sure what else is missing verses what comes with it. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-31-2020, 11:21 PM	#13
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,626	Re: Selling My K20 4WD Projects Dave I think you can remove that brace by blasting the rivets. Shame to cut a good 4WD frame, they're so rare.. I'd scoop it up if I was closer.

01-31-2020, 11:42 PM	#14
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects I no of a lot of 60-66 trucks around 120 parts trucks and there is no 4wd trucks. You would think living in Kansas there would be but there’s none. Parts are getting hard to find I been trying to find a nice rust free drivers side door for my 64 and I can’t find a nice one.

01-31-2020, 11:53 PM	#15
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,626	Re: Selling My K20 4WD Projects Will keep an eye out for a good door. Most of my trucks are 60-63. Btw some $ coming your way.

02-01-2020, 09:43 PM	#16
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects The rear lift block are nice no cracks $100.00 for the set plus shipping. I have two of the three drive shafts the one from the transmission to the transfer case $50.00 rear end to transfer case $75.00

04-01-2020, 11:09 PM	#17
whateverpratt Registered User Join Date: Jul 2013 Location: Deltona, FL Posts: 235	Re: Selling My K20 4WD Projects It looks like you still have at least one front cab mount on the frame on the trailer. It looks like it might be a 63-66 mount. I'm interested in that mount and the other side if you have it. My k10 frame that I recently got is a '62, and my the cab I have for it is a '63, so I'm looking for some '63-'66 k10 front cab mounts __________________ '66 c10 rust bucket, 350 (pulled and sold, now waiting on 4bt install) nv4500 stock bellhousing, '85 c30 front suspension and 3/4 rear coils with 4.10 H072 rear axle NV4500 install http://67-72chevytrucks.com/vboard/s....php?p=6488778 Suspension update http://67-72chevytrucks.com/vboard/s....php?p=8236775



Register or Log In To remove these advertisements.

04-02-2020, 05:59 AM	#18
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects Sorry they are gone

10-12-2020, 04:30 PM	#19
whateverpratt Registered User Join Date: Jul 2013 Location: Deltona, FL Posts: 235	Re: Selling My K20 4WD Projects I just realized you had the steering box. PM sent __________________ '66 c10 rust bucket, 350 (pulled and sold, now waiting on 4bt install) nv4500 stock bellhousing, '85 c30 front suspension and 3/4 rear coils with 4.10 H072 rear axle NV4500 install http://67-72chevytrucks.com/vboard/s....php?p=6488778 Suspension update http://67-72chevytrucks.com/vboard/s....php?p=8236775

10-16-2020, 10:17 AM	#20
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects Steering box is sold to whateverpratt I will sale the motor mount the transmission crossmember the transfer case bracket front and back spring perches. Rear drive shaft if any one needs any of them the prices are from $50.00 to $150 Last edited by shortstep60; 10-28-2020 at 06:39 PM.

05-21-2020, 09:49 PM	#21
pete68camaro New Member Join Date: Jun 2007 Location: Texas Posts: 9	Re: Selling My K20 4WD Projects did you sell the rear lift blocks? thanks.

05-21-2020, 10:06 PM	#22
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects No and they are nice no cracks

08-09-2020, 03:07 PM	#23
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects Ttt

09-18-2020, 09:29 AM	#24
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: Selling My K20 4WD Projects If anyone is needing the bare frame with out cab mounts $200.00 The frame is straight and some surface rust you can text me or call me if you have any questions 785 408 6822 David

10-01-2020, 10:55 PM	#25
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: Selling My K20 4WD Projects hi is lift blocks not sold i will take them ..thanks butch

Register or Log In To remove these advertisements.