|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-19-2019, 05:44 PM
|
#1 |
|
Registered User
Join Date: Jun 2018
Location: Freeburg, IL
Posts: 6
|
Door hinge problem that appears to be unusual.
The threaded "plate" behind the opening of the door hinge with the holes/threads that secures/treads the bolt, came loose and has dropped to the bottom, inside the door with no way to get to it. i.e. nothing to tighten the door hinge to on the cab.
It's in private storage to I don't have access to a welder. Evidently no one has experienced this before, since I've spoken to several auto body folks with no idea of what to do. Would anyone have something I can try to get my drivers side door on my '67 so I can proceed from there. Thank you, Don |
|
|
|
09-19-2019, 06:00 PM
|
#2 |
|
Registered User
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,978
|
Re: Door hinge problem that appears to be unusual.
If you want something temporary you could try well nuts.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson |
|
|
|
|
09-19-2019, 07:00 PM
|
#3 |
|
Moderator
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,204
|
Re: Door hinge problem that appears to be unusual.
If the piece has dropped into the door, you can retrieve it by removing the door panel and fishing it out...see pic for what it looks like....
If the piece you mention is inside the pillar you can make up a new threaded section and cut a slot in the pillar to replace it....drill some small holes in the outer skin of the pillar and tack weld it in place....
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox 
|
|
|
|
|
09-20-2019, 06:40 PM
|
#4 | |
|
Still plays with trucks
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
|
Re: Door hinge problem that appears to be unusual.
Quote:
You should be able to feel where the spot welds held it in place and locate it appropriately. Run the bolts down to clamp it tight then install a couple flat head crews or rivets to lock it down there. You should be able to put the hinge back on after that. Once the bolts are torqued down they won't let it move around. When you get it home you can weld the plate to the door if you feel you need to.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars |
|
|
|
|
|
09-20-2019, 08:58 PM
|
#5 |
|
Registered User
 Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
|
Re: Door hinge problem that appears to be unusual.
If you need to replace the plate let me know I have a scrap door or I can get a plate for the A piller from a donor that I know of.
|
|
|
|
|
11-29-2019, 10:35 PM
|
#6 |
|
Registered User
Join Date: Dec 2011
Location: labadie mo
Posts: 48
|
Re: Door hinge problem that appears to be unusual.
Did you ever retrieve the backing plate?
|
|
|
|
|
| Bookmarks |
| Tags |
| door hinge, door hinge plate |
|
|
Hybrid Mode
