Keeping Factory ac pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SlowGreen71** · 10-20-2019, 09:31 AM

Currently mocking up my 67. I wanted to retain my AC compressor in the factory location. I used 73-87 c20 stands and clamshell mount and made the engine side mount out of 1/4. Similar to what ece sells. This places the engine too far forward for my liking. First stand mount hole slides back to 2nd mount hole in the frame, sliding the engine back about 2.75”. Here’s my simple solution. Thought I’d share if it may help someone else.

**clay68c10** · 10-20-2019, 09:37 AM

That’s a slick way to do it!
Those later clamshell mounts are so much better than the flat type.

10-20-2019, 09:31 AM	#1
SlowGreen71 Junior Member Join Date: Dec 2017 Location: vader, WA Posts: 57	Keeping Factory ac pump Currently mocking up my 67. I wanted to retain my AC compressor in the factory location. I used 73-87 c20 stands and clamshell mount and made the engine side mount out of 1/4. Similar to what ece sells. This places the engine too far forward for my liking. First stand mount hole slides back to 2nd mount hole in the frame, sliding the engine back about 2.75”. Here’s my simple solution. Thought I’d share if it may help someone else. Attached Images

10-20-2019, 09:37 AM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: Keeping Factory ac pump That’s a slick way to do it! Those later clamshell mounts are so much better than the flat type. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.