|
|
|
10-24-2019, 01:43 PM
|
#1 |
|
Registered User
Join Date: Sep 2016
Location: Ozark, MO
Posts: 573
|
6 cyl exhaust
What is this thing (I am guessing it is for cold starting).
Anyway, mine moves freely, but the spring is broken. Is there any issue with ignoring it? Is there a source for the spring? |
|
|
|
10-24-2019, 04:14 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: 6 cyl exhaust
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
10-24-2019, 08:25 PM
|
#3 |
|
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 540
|
Re: 6 cyl exhaust
Yup, that's the heat riser to help warm up the engine faster on cold days. Yes, you can ignore it, it's weighted in a way so that when the springs breaks, it doesn't cause bad things to happen.
Looks like your spring probably just needs the bend to hook onto the post in the picture. Warning, the post might be rusted to the point that it breaks off sooner or later. If that does happen, you can carefully drill and tap to install a new one of your own making. If you do get a new spring, the older jeeps used the same bi-metal spring but they usually cost about half as much as the Chevy version. Should you go the Jeep route, you'll have to trim it and bend a small tab to, again, hook onto that small post.
__________________
My truck ain't dead, it just smells funny. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
