The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board > 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-27-2019, 10:43 PM   #1
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
1971 Suburban 4x4 build "The Big Ugly"

This is my 1971 Chevy Suburban my dad bought in 1998 from my uncle who had it for a few years. The engine was rebuilt in the early 90's by a local shop in Graham and has about 154k miles on it now. The original transmission started slipping in 2012 and I replaced it with a JY TH350 at my work. That one died a very quick death and left me stranded one day. I had it rebuilt and got about 1000 miles until it died. I parked it in my backyard in 2013 and haven't touched it since. I bought and sold a 540iT this summer and made a huge profit off it so I decided to dump it all into the Suburban because I wanted a truck and fun toy.

Enough history. Now for the good stuff.

We decided we're gonna pull it out and swap the transmission. Then we wanted to pull the engine to refresh it. Then we also pulled the transfer case for a refresh as well. We promised ourselves it would not snowball. But that went out the window quick.

The BMW wagon I sold. Made a little over 330hp on the dyno at the wheel. Bigger intake manifold, nice exhaust, and a DUDMD stage 3 tune.



My dad pressure washing it after pulling it out.



For the longest time, I had no idea this tunnel came off.



Found a 700R4 to rebuild with a short shaft and all the upgrades I can do.



And after it came back from the shop. I had it rebuilt at TRC in Kent. Very helpful people and they asked the right questions.



It leaked. A lot. From everywhere.





Started pulling, I unbolted the transmission from the transfer case and we pulled the engine and trans as an assembly.





Found that ticking noise!



Started stacking up parts. We're reusing the Edelbrock Performer intake manifold my dad installed years ago, I bought an Edelbrock carb from my old boss and he threw in a Mallory Unilite distributor, coil, and wires.



After discovering the tiny 1.72/1.50 valves I broke down and bought some Summit heads that came in a Dart Head box. 2.02/1.60 valves.





It's bored .030 over and the bottom end looks great. Still has cross hatch marks on the cylinder walls. I ran a rag over the tops of the pistons, hence the dirty looking tops.

__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 10-29-2019 at 11:15 AM. Reason: Google Photos is not a good host
Yerboogieman is offline   Reply With Quote
Old 10-27-2019, 11:22 PM   #2
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Transfer case needs a little care. She's been beat down.


That's much better. My dad spent this weekend cleaning and resealing it this weekend. The main reason my transmissions were going out was a little O-ring on the shaft was completely shot. Resealed and ready to slap back in. It's been rebuilt once before so I wasn't worried about the bearings.


I dipped the front driveshaft and T-case adapter in the ultrasonic cleaner while I sandblasted the headers to ceramic powdercoat them.




I removed the fenders, seats, cluster, glovebox, heater, sound deadening, carpet and hacked up wiring harness today. No rat droppings luckily.





Me and this old harness have had some bad times so I am glad to be rid of it.



That's about as far as we got. I'm trying to get my dad to sign up for an account on here so he can post about it too. I know he wants to do a write up on how to measure and drill the frame rails for a 700r4 install.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 10-29-2019 at 11:25 AM. Reason: Resized images
Yerboogieman is offline   Reply With Quote
Old 10-28-2019, 11:51 AM   #3
ManNamedJed
Registered User
 
Join Date: May 2018
Location: Reno, NV
Posts: 232
Re: 1971 Suburban 4x4 build "The Big Ugly"

Sounds like a cool build. Not sure if its just me, but I'm not seeing any pics.
ManNamedJed is offline   Reply With Quote
Old 10-28-2019, 12:05 PM   #4
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

I see the pictures on my home computer and on my phone if I use Chrome or Opera, but not on internet explorer. They're embedded from Google Photos.

Edit: Got the images working and resized.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 10-29-2019 at 11:26 AM.
Yerboogieman is offline   Reply With Quote
Old 10-29-2019, 11:33 AM   #5
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Here's a picture of the floor after I ripped the carpet out. Gonna be fun patching all this. Luckily, the front floor and the body panels is the extent of the rust. The rest of the floor is actually pretty good.

__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 10-29-2019, 10:52 PM   #6
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by Yerboogieman View Post
Here's a picture of the floor after I ripped the carpet out. Gonna be fun patching all this. Luckily, the front floor and the body panels is the extent of the rust. The rest of the floor is actually pretty good.

You guys are moving right along on it. keep us posted on the progress.....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 10-31-2019, 04:30 PM   #7
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by LockDoc View Post
You guys are moving right along on it. keep us posted on the progress.....

LockDoc
Will do. Should pick up again this weekend. Gonna have the GF helping rough up the floor on Saturday in preparation for primer while I clean the underside to rust proof and paint that if the weather cooperates. One day I'll have a garage big enough for this thing.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 10-31-2019, 08:01 PM   #8
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by Yerboogieman View Post
Will do. Should pick up again this weekend. Gonna have the GF helping rough up the floor on Saturday in preparation for primer while I clean the underside to rust proof and paint that if the weather cooperates. One day I'll have a garage big enough for this thing.

Yeah, that's one thing about the Burbs it takes a little bigger garage to have room to work around it.....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 11-12-2019, 01:34 PM   #9
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Progress has been moving steadily. Been doing some floor repair, sealing, drilling, welding, and cutting. I'll post some pictures tonight and remember to resize them.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 11-20-2019, 10:16 PM   #10
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Been focused on getting it done I almost forgot to post. We started sanding and coating the floor in rust reformer





My girlfriend was under the hood getting that prepped. She fits in smaller places better than I do.



I got out the industrial RoundUp and went to work on this. I'll take another photo this weekend of it all cleaned up. Rain chased me inside. My dad started stripping the cowl and the metal underneath looks much better than I expected. Actually looks perfect for an original piece. I need to seal up the corners. They leak water into the cab.



And the moment I've been excited for. The engine is fully assembled and ready to go back in.



I ordered a new custom driveshaft and it's sitting in my garage right now. ready to go back in. It's gonna feel so nice with a whole new drivetrain. After it's back together I'll chop a hole in the firewall and put the new harness in. I might take a video of first start up and the tuning process on the Dynojet.

While this build hasn't been cheap, it's cheaper and cooler than a new truck. I'm anti car payment.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 11-20-2019 at 10:22 PM.
Yerboogieman is offline   Reply With Quote
Old 11-20-2019, 10:46 PM   #11
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

-
Wow you have a mobile garden (almost)...

Looks like the girlfriend is doing a great job. Tell her to keep up the good work.

How is the rust reformer to work with. looks like it goes on pretty smooth.

Vroom, Vroom. You will be driving this thing before you know it.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 11-22-2019, 02:05 PM   #12
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Kinda sucked to spread on to be honest. There are some thin spots because if the surface was too smooth it would act like water on a waxed car. Even with sanding and prep with lacquer thinner.


It's so close to being running but something keeps coming up that requires attention.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 11-26-2019, 12:29 PM   #13
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1971 Suburban 4x4 build "The Big Ugly"

Looking good, I'm subbing to follow along
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 12-01-2019, 09:49 PM   #14
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Currently battling blistering cold and rain. Lately we've been getting about 3 to 4 hours of usable sunshine on weekends. But there is still progress. I wanna hit the snow with this thing so bad.

We got the transmission bolted to the engine, torque converter installed.



We measured everything before hand and even had the transfer case mount slid on the back of the transmission. Took measurement after measurement and we were still .20 off the mark. If only Advance Adapters made it just a little bit thicker. We ended up milling the shaft and everything went together as planned. The gap between the transmission and transfer case is exactly 1.875. I wish I would have put the starter on with the engine out to check the clearance.











Went to the local Amsoil dealer and picked up a bunch of various fluids. I'm just going to use BMW blue coolant and BMW DOT4 because it's cheap and I have a ton of it on hand. I use it in everything I build.



Also, my dad is having trouble using his account. If there are any admins that can help, his username is Riff_Raff.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 12-01-2019 at 10:05 PM.
Yerboogieman is offline   Reply With Quote
Old 12-02-2019, 12:04 AM   #15
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

-
Looking good.

I will see what I can find out on his account. Can you give me a heads up to what kind of problem he is having?

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-09-2020, 03:01 PM   #16
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Update is that we have it all installed, engine moved forward, front crossmember trimmed, headers fit perfect and look great with the ceramic on them, I'll never do the spacer from Advance Adapters again that was hell but I love all the room behind the engine.

The rain has not let us get much work done but this thread is not abandoned.
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 02-13-2020, 01:21 PM   #17
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Please make the rain stop lol
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 07-29-2020, 09:42 AM   #18
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1971 Suburban 4x4 build "The Big Ugly"

Any updates on this
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul

Last edited by Ol Blue K20; 07-29-2020 at 06:07 PM.
Ol Blue K20 is offline   Reply With Quote
Old 07-29-2020, 12:34 PM   #19
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by Ol Blue K20 View Post
Any updates on his

Looks like 4/16/2020 was the last time he was on. He was moving along really good on it, I hope he has been able to work on it.....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 07-30-2020, 10:42 AM   #20
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by LockDoc View Post
Looks like 4/16/2020 was the last time he was on. He was moving along really good on it, I hope he has been able to work on it.....

LockDoc
Yes he was, I was hoping he's been holding back on the updates. I hope all is well with him.
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 10-04-2020, 05:11 PM   #21
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by Ol Blue K20 View Post
Yes he was, I was hoping he's been holding back on the updates. I hope all is well with him.
All is well, but I tell ya, 2020 has been hectic. Not just with the 'Rona, but rushing to finish projects, moving across the country, taking a few road trips. One of the road trips was to see my grandmother for the last time unfortunately, but she kept her sense of humor all the way until the end. I definitely got my humor and sarcasm from her. It has been quite the wild ride. I have some pictures to post of my most recent progress, moving my Suburban and Saturn in an enclosed hauler, building the Saturn itself, helping my friend build his Honda. If anything says "Car guy", it'll be this post.







Went to the Grand Canyon with some friends. He is also the one who transported my cars in record time.


Had to start throwing this engine together to get my 99 SC2 White Hot running. There's a build thread for it over at Sixthsphere.com if anyone is interested.




I cut too much from the firewall and had to make this nifty plate. I'm kinda glad I did this because the fusebox feels much sturdier than the stock one did.



Oh no, what will I do about a heater?


There was so much wiring going into this thing. I went with the most connections I could get from Painless. It wasn't difficult, just time consuming.


My dad and I planned on retrofitting a clutch fan, but I was on Amazon and ordered this fan shroud from Mishimoto. They're hooked up to turn on when the engine hits something like 190 degrees with a kit from Painless.


I wanted to use the column shifter really bad. My dad didn't. We compromised and I lost.


I ordered what I thought was a set of LED headlights and only got one. I also refurbished the turn signal buckets and got some white lenses. I was going to order a new egg crate grill, but just couldn't see dropping that much on a piece of plastic. Threw the old one back in the best I could along with the foglights to fill in the previous owners holes in the grill.


I was driving through the Nevada desert with my birds and nothing around for miles. No trees to pee on, nothing. I found this beef jerky store just outside of Rachel, NV, used the bathroom and bought some awesome jerky from the nicest gal.


Roadtripped back up to Washington from AZ to help my friend with his Honda. Plus I was homesick. Still a little homesick.


__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 10-04-2020 at 05:48 PM.
Yerboogieman is offline   Reply With Quote
Old 10-04-2020, 05:28 PM   #22
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

Oh, and a video of first start up and a little bit of the cam break in. Timing was way off, but it ran. You should be able to view this even without a FB account.

https://www.facebook.com/555513664/v...8310326198665/
__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread
Yerboogieman is offline   Reply With Quote
Old 10-04-2020, 08:27 PM   #23
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,777
Re: 1971 Suburban 4x4 build "The Big Ugly"

Quote:
Originally Posted by Yerboogieman View Post
Oh, and a video of first start up and a little bit of the cam break in. Timing was way off, but it ran. You should be able to view this even without a FB account.

https://www.facebook.com/555513664/v...8310326198665/

Still sounds pretty good. Glad to see you posting again. Sounds like you have been busy for sure....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 10-05-2020, 08:26 AM   #24
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1971 Suburban 4x4 build "The Big Ugly"

Wow! You have been busy. Welcome back!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 10-05-2020, 11:20 PM   #25
Yerboogieman
Registered User
 
Yerboogieman's Avatar
 
Join Date: Nov 2011
Location: Auburn, Wa
Posts: 93
Re: 1971 Suburban 4x4 build "The Big Ugly"

These projects may have been fueled by margaritas. It's what you do lol.


Nobody asked, but I'm too proud of it. My 99 SC2 White Hot High Comp. 1 of 250. Full restoration.


__________________
-Taylor

1971 Chevy Suburban 4x4 Build Thread

Last edited by Yerboogieman; 10-05-2020 at 11:35 PM.
Yerboogieman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com