|
|
|
11-04-2019, 12:16 AM
|
#1 |
|
Registered User
Join Date: Oct 2018
Location: B.C. Canada
Posts: 206
|
TD Trunnions
I bought some Delrin tailgate hinges from TD Trunnions with stainless bases.
Very nice but are a bear to install. Anyone else have these and have tips on installing? I have them installed now at the mock up stage, but can't imagine installing with fresh paint, as it is a tight fit. Once in they are great but because they have no sloppy clearance like the factories, angling in the tailgate is going to take away paint. I have tried to contact vendor with no luck. Help appreciated |
|
|
|
11-04-2019, 09:08 AM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: TD Trunnions
I put them in the tailgate (stepside) first, did it by myself no help, no scratches, no issues.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
11-04-2019, 10:56 AM
|
#3 | |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
|
Re: TD Trunnions
For a fleetside? At what part of the install is giving you the most difficulty? I did put low tack masking tape on all of the edges. I installed one trunnion in the bedside post channel, lightly snugged the hardware. I applied some white lithium grease on the trunnion. With the help of my wife, I installed that side of the tailgate (as if the tailgate was in the down position). While my wife held the tailgate level, I lubed the other trunnion with the grease and placed it in the tailgate socket. Holding the trunnion vertical (like it bolts in), I carefully raised that side of the tailgate so that the trunnion cleared the channel and slowly lowered it so that my wife could run the bolts finger tight. I hope that helps.
Quote:
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
|
|
11-04-2019, 04:17 PM
|
#4 |
|
Registered User
Join Date: Oct 2018
Location: B.C. Canada
Posts: 206
|
Re: TD Trunnions
I did basicly the same thing, although I installed both trunnions into the tailgate before installing. I found that with the trunnions fitting with close tolerances they do not move at all from 90 degrees to the tailgate as the stock ones do.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
