69-72 Blazer push-on door seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Precision Parts** · 11-13-2019, 08:09 PM

These are now available and shipping to distributors. They include a metal core in the molded end so the 3 bolts won't rip the rubber molded end. I will have one on display at Dino's Git Down on November 15th if your in the area.

Part number: DWP 1111 69.

-Derek

**A1971Blazer** · 11-14-2019, 08:16 AM

just received mine.....haven't installed them yet but they look very good

**7D2N** · 11-14-2019, 10:17 PM

I got a set and pleased with how they fit. I couldn't put them all the way on because I need to trim the repo rocker along the floor to fit the seal.

**7D2N** · 11-14-2019, 10:26 PM

couple more..

**PDXk5** · 11-14-2019, 11:44 PM

That looks great. I received mine today. One of them has two small tears in it. I opened both and may have put them in the wrong bags. It looks like the driver side (but it’s in the bag marked DWR).
I’ll have to reach out to GMCPauls to see what can be done for a replacement.

**7D2N** · 11-15-2019, 10:36 AM

My seals were in bags marked DWR and DWL then the part number. I assume for right and left. the seals fit tight and don't slide around at all.

**DaHos** · 11-20-2019, 03:43 PM

Getting ready to install mine today and I encountered the same thing with the right being in the left bag and the left being in the right bag, other than that they look good we'll see how they fit here in a bit.

**PDXk5** · 11-21-2019, 02:14 AM

Quote:

Originally Posted by DaHos

Getting ready to install mine today and I encountered the same thing with the right being in the left bag and the left being in the right bag, other than that they look good we'll see how they fit here in a bit.

GMCPauls has put in a replacement order to Precision for me. It shipped Monday so I should have it shortly.

I’m interested to hear how everyone’s installation goes. Please share. It will be good to compare notes on how things go.

Thanks!

SeventyOne · 11-21-2019, 02:36 PM

Here's my installation notes in my build thread.

http://67-72chevytrucks.com/vboard/s...&postcount=209

As mentioned the seals install super easy. Getting the top realigned was not.

I'd also like to note that the seal part the touches the door is VERY soft and supple but as seen it can tear easily. As i was fitting up my sill plates I cut a 1" gash in my passenger seal. So tread VERY carefully around them.

11-13-2019, 08:09 PM	#1
Precision Parts Tech Help Join Date: Apr 2012 Location: Broken Arrow, OK Posts: 197	69-72 Blazer push-on door seals These are now available and shipping to distributors. They include a metal core in the molded end so the 3 bolts won't rip the rubber molded end. I will have one on display at Dino's Git Down on November 15th if your in the area. Part number: DWP 1111 69. -Derek __________________ PRECISION Updates Subscribe --->Installation Videos Follow ------->Instagram Like---------->Facebook

11-14-2019, 08:16 AM	#2
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,199	Re: 69-72 Blazer push-on door seals just received mine.....haven't installed them yet but they look very good __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

11-14-2019, 10:17 PM	#3
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: 69-72 Blazer push-on door seals I got a set and pleased with how they fit. I couldn't put them all the way on because I need to trim the repo rocker along the floor to fit the seal. Attached Images __________________ Just for the fun of it

11-14-2019, 10:26 PM	#4
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: 69-72 Blazer push-on door seals couple more.. Attached Images __________________ Just for the fun of it

11-14-2019, 11:44 PM	#5
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 939	Re: 69-72 Blazer push-on door seals That looks great. I received mine today. One of them has two small tears in it. I opened both and may have put them in the wrong bags. It looks like the driver side (but it’s in the bag marked DWR). I’ll have to reach out to GMCPauls to see what can be done for a replacement. Attached Images

11-15-2019, 10:36 AM	#6
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: 69-72 Blazer push-on door seals My seals were in bags marked DWR and DWL then the part number. I assume for right and left. the seals fit tight and don't slide around at all. __________________ Just for the fun of it

11-20-2019, 03:43 PM	#7
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 69-72 Blazer push-on door seals Getting ready to install mine today and I encountered the same thing with the right being in the left bag and the left being in the right bag, other than that they look good we'll see how they fit here in a bit. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-21-2019, 02:36 PM	#9
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,382	Re: 69-72 Blazer push-on door seals Here's my installation notes in my build thread. http://67-72chevytrucks.com/vboard/s...&postcount=209 As mentioned the seals install super easy. Getting the top realigned was not. I'd also like to note that the seal part the touches the door is VERY soft and supple but as seen it can tear easily. As i was fitting up my sill plates I cut a 1" gash in my passenger seal. So tread VERY carefully around them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.