AR WTB Heat Shield and Riser Tube for SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

distortedolskool · 11-14-2019, 10:22 AM

Looking for the inner/outer shield and the riser tube for a SBC.
Photo borrowed from an old Ad.

distortedolskool · 02-20-2020, 12:41 AM

I acquired the riser tube but am still looking for the shields. TTT

ajgriffin · 02-20-2020, 02:32 AM

I'll check tomorrow. I may have them

ajgriffin · 02-24-2020, 09:34 PM

Sorry for the delay. I don't think I have exactly what you're looking for, but here's a pic of what's installed on my SBC. Let me know if any of this would work for you

Name: IMG_5304.jpg
Views: 540
Size: 38.2 KB

Name: IMG_5304.jpg
Views: 540
Size: 38.2 KB

Name: IMG_5305.jpg
Views: 534
Size: 50.7 KB

distortedolskool · 02-24-2020, 11:53 PM

Quote:

Originally Posted by ajgriffin

Sorry for the delay. I don't think I have exactly what you're looking for, but here's a pic of what's installed on my SBC. Let me know if any of this would work for ]

That is a heat riser assembly but looks to be from a different year. Is that the passenger side?

Thanks for checking!

ajgriffin · 02-25-2020, 12:08 AM

Quote:

Originally Posted by distortedolskool

That is a heat riser assembly but looks to be from a different year. Is that the passenger side?

Thanks for checking!

Yup, passenger side. I honestly have no idea what this engine is out of. It's in my 71 Suburban, but its a 350 and the SPID says it came with a 400 so who knows where the PO sourced it from.

distortedolskool · 04-22-2020, 10:13 PM

Bump
Picked up a riser tube but still looking for the shields.

NorCalC20LWB · 04-23-2020, 12:36 PM

Is this what you're looking for? Came off my '72 350/350.

distortedolskool · 04-23-2020, 01:11 PM

Quote:

Originally Posted by NorCalC20LWB

Is this what you're looking for? Came off my '72 350/350.

I think so but let me look at my photos this evening to confirm. Maybe the photos I have are from a different model.

Is that texture paint or is that just the photo?

NorCalC20LWB · 04-23-2020, 01:21 PM

Not texture paint, it is the oh so desirable "patina" It's been a CA truck all its life here in Nor Cal central valley (Sacramento area), so it appears to be surface rust.

distortedolskool · 04-23-2020, 10:24 PM

Quote:

Originally Posted by NorCalC20LWB

Not texture paint, it is the oh so desirable "patina" It's been a CA truck all its life here in Nor Cal central valley (Sacramento area), so it appears to be surface rust.

I found photos of outer shields with, and without, holes so I am guessing there were different versions.

Do you happen to have the inner piece too? If not I will probably just hold out until I can a inner/outer set. Thanks again for digging it out and taking photos.

**Chevy Fan Always** · 04-23-2020, 11:08 PM

The ones with the two large holes I think were for the bosses on the manifolds that could be used for A.I.R. injection (smog) trucks.

NorCalC20LWB · 04-24-2020, 11:29 AM

Looks like I do have the other side also, tore it all out a few years ago after a rebuild. I have headers now so don't need them, here's a pic of what I have:

**tim71** · 04-26-2020, 12:42 AM

Quote:

Originally Posted by NorCalC20LWB

Looks like I do have the other side also, tore it all out a few years ago after a rebuild. I have headers now so don't need them, here's a pic of what I have:

I would be interested in the inner shield if you will separate and distortedolschool passes.

**Chevy Fan Always** · 04-28-2020, 03:05 PM

Quote:

Originally Posted by NorCalC20LWB

Looks like I do have the other side also, tore it all out a few years ago after a rebuild. I have headers now so don't need them, here's a pic of what I have:

I would be interested in the 4 spark plug shields. Price shipped to 44805

Mike

distortedolskool · 04-28-2020, 04:38 PM

I passed on it so y'all can PM him directly and ask about parts.

and if you know of someone with an inner and outer heat shield, let me know!

distortedolskool · 09-11-2020, 07:58 PM

Bump. Still looking for the heat shield without the holes.

**painterljp** · 09-11-2020, 08:02 PM

You looking for one without holes and for straight dump or angled back? Which manifolds do you have?

distortedolskool · 09-11-2020, 08:22 PM

Quote:

Originally Posted by painterljp

You looking for one without holes and for straight dump or angled back? Which manifolds do you have?

The angle back slightly. Hopefully you can see the photo but they are stock manifolds.

distortedolskool · 11-25-2020, 09:44 PM

Bump.
Still looking for the inner and outer shields without the smog holes.

52napco · 11-26-2020, 02:13 PM

I think I have the set..the earlier set that Norcal20 posted were for 4x4 manifolds..the 2wd angles back more. I'll double check tmrw and lay hands on them.

52napco · 11-27-2020, 01:29 PM

Here you go...let me know if you still need them.
I can take them to post office first of the week.

distortedolskool · 11-27-2020, 05:06 PM

Perfect! I'll PM you.

distortedolskool · 03-10-2021, 09:51 PM

Bump. Still looking for the inner/outer shields.

distortedolskool · 05-03-2021, 09:32 PM

Bump. Still looking for the inner/outer shields.

11-14-2019, 10:22 AM	#1
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	WTB Heat Shield and Riser Tube for SBC Looking for the inner/outer shield and the riser tube for a SBC. Photo borrowed from an old Ad.

02-20-2020, 12:41 AM	#2
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC I acquired the riser tube but am still looking for the shields. TTT

02-20-2020, 02:32 AM	#3
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: WTB Heat Shield and Riser Tube for SBC I'll check tomorrow. I may have them __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

02-24-2020, 09:34 PM	#4
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: WTB Heat Shield and Riser Tube for SBC Sorry for the delay. I don't think I have exactly what you're looking for, but here's a pic of what's installed on my SBC. Let me know if any of this would work for you __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

04-22-2020, 10:13 PM	#7
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Bump Picked up a riser tube but still looking for the shields.

04-23-2020, 12:36 PM	#8
NorCalC20LWB Registered User Join Date: Mar 2015 Location: Bigfork, MT Posts: 466	Re: WTB Heat Shield and Riser Tube for SBC Is this what you're looking for? Came off my '72 350/350. Attached Images

04-23-2020, 01:21 PM	#10
NorCalC20LWB Registered User Join Date: Mar 2015 Location: Bigfork, MT Posts: 466	Re: WTB Heat Shield and Riser Tube for SBC Not texture paint, it is the oh so desirable "patina" It's been a CA truck all its life here in Nor Cal central valley (Sacramento area), so it appears to be surface rust.

04-23-2020, 11:08 PM	#12
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: WTB Heat Shield and Riser Tube for SBC The ones with the two large holes I think were for the bosses on the manifolds that could be used for A.I.R. injection (smog) trucks. Last edited by Chevy Fan Always; 04-23-2020 at 11:14 PM. Reason: info

04-24-2020, 11:29 AM	#13
NorCalC20LWB Registered User Join Date: Mar 2015 Location: Bigfork, MT Posts: 466	Re: WTB Heat Shield and Riser Tube for SBC Looks like I do have the other side also, tore it all out a few years ago after a rebuild. I have headers now so don't need them, here's a pic of what I have: Attached Images

04-28-2020, 04:38 PM	#16
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC I passed on it so y'all can PM him directly and ask about parts. and if you know of someone with an inner and outer heat shield, let me know!

09-11-2020, 07:58 PM	#17
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Bump. Still looking for the heat shield without the holes.

09-11-2020, 08:02 PM	#18
painterljp Senior Member Join Date: Nov 2014 Location: Albuquerque NM Posts: 901	Re: WTB Heat Shield and Riser Tube for SBC You looking for one without holes and for straight dump or angled back? Which manifolds do you have?

11-25-2020, 09:44 PM	#20
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Bump. Still looking for the inner and outer shields without the smog holes.

11-26-2020, 02:13 PM	#21
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: WTB Heat Shield and Riser Tube for SBC I think I have the set..the earlier set that Norcal20 posted were for 4x4 manifolds..the 2wd angles back more. I'll double check tmrw and lay hands on them.

11-27-2020, 01:29 PM	#22
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: WTB Heat Shield and Riser Tube for SBC Here you go...let me know if you still need them. I can take them to post office first of the week. Attached Images



Register or Log In To remove these advertisements.

11-27-2020, 05:06 PM	#23
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Perfect! I'll PM you.

03-10-2021, 09:51 PM	#24
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Bump. Still looking for the inner/outer shields.

05-03-2021, 09:32 PM	#25
distortedolskool Registered User Join Date: Mar 2012 Location: Fayetteville, AR Posts: 44	Re: WTB Heat Shield and Riser Tube for SBC Bump. Still looking for the inner/outer shields.

Register or Log In To remove these advertisements.