|
|
|
12-09-2003, 05:02 PM
|
#1 |
|
Registered User
Join Date: Apr 2002
Location: Manitoba, Canada
Posts: 663
|
Bed Floor Repair
I need some suggestions. The previous owner of my truck used it to haul around a 5th wheel horse trailer. Each of the four mounting points for in-bed hitch receiver are rusted and getting worse. What is my best strategy for repairing this rust? Should I go to the wrecker and get him to cut a piece out of a box that he's got, or does someone know of a good source for a patch that would work well.
After I patch the bed floor I want to do a cheap spray-on liner. 
__________________
Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said. |
|
|
|
12-09-2003, 05:24 PM
|
#2 |
|
Insert Witty Text Here
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
|
I'm not sure, but I think LMC selss patch panels for it.
Slonaker |
|
|
|
|
12-09-2003, 06:34 PM
|
#3 |
|
www.73-87chevytrucks.com
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Something like this:
http://www.73-87chevytrucks.com/merc..._Code=7387Beds
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
|
|
|
12-10-2003, 03:04 PM
|
#4 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
if its not that bad you c ould just get one of the patch panels on 73-87.com and weld it in or to do it 100% right just get a new floor and change it
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
12-10-2003, 04:36 PM
|
#5 |
|
Registered User
Join Date: Apr 2002
Location: Manitoba, Canada
Posts: 663
|
The bed floor is pretty good except for the obvious rust holes. They are in four places between the fender tubs. I think a repair will probably be my best bet.
__________________
Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said. |
|
|
|
 |
| Bookmarks |
|
|
)
Hybrid Mode
