47-55.1 Leveling a Frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dongray · 04-18-2020, 06:22 PM

Ok, I was hesitant to ask this question but can’t find it in the factory manual. I am wanting to level my frame (1950 1/2 ton) on jack stands but what portions of the frame are on the same plane and should equally distant to the ground?
The only section that appears along the same plane to me is the frame under the cab but I’m not certain. Any information is greatly appreciated.

Thanks,
Posted via Mobile Device

**mr48chev** · 04-18-2020, 07:20 PM

I would say that you are correct.

Dongray · 04-19-2020, 09:45 PM

Quote:

Originally Posted by mr48chev

I would say that you are correct.

Thanks Mr48! I managed to get it level . Now I’m fight the rear cab mounts and keeping the rear of the cab level.
Posted via Mobile Device

mick53 · 04-19-2020, 08:36 PM

Thanks. I have had the same question.

**mr48chev** · 04-19-2020, 11:52 PM

The first couple of pages in this link are the pages from the assembly manual that show how far to space the cab off the frame in case you don't have the info. https://s173.photobucket.com/user/mr...?sort=2&page=1

Dongray · 04-20-2020, 08:45 PM

Quote:

Originally Posted by mr48chev

The first couple of pages in this link are the pages from the assembly manual that show how far to space the cab off the frame in case you don't have the info. https://s173.photobucket.com/user/mr...?sort=2&page=1

Thanks Mr48. I actually have the manuals and appreciate the help. I’m going to create a new post with just the cab problem so I can keep it separate from the frame question. I would appreciate if you read it and let me know what you think.

Thanks,
Eric

04-18-2020, 06:22 PM	#1
Dongray Registered User Join Date: Oct 2017 Location: Fort Worth Texas Posts: 88	Leveling a Frame? Ok, I was hesitant to ask this question but can’t find it in the factory manual. I am wanting to level my frame (1950 1/2 ton) on jack stands but what portions of the frame are on the same plane and should equally distant to the ground? The only section that appears along the same plane to me is the frame under the cab but I’m not certain. Any information is greatly appreciated. Thanks, Posted via Mobile Device

04-18-2020, 07:20 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Leveling a Frame? I would say that you are correct. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-19-2020, 08:36 PM	#4
mick53 Registered User Join Date: Oct 2018 Location: Warsaw IN Posts: 897	Re: Leveling a Frame? Thanks. I have had the same question.

04-19-2020, 11:52 PM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Leveling a Frame? The first couple of pages in this link are the pages from the assembly manual that show how far to space the cab off the frame in case you don't have the info. https://s173.photobucket.com/user/mr...?sort=2&page=1 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.