Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-15-2020, 09:30 PM | #1 |
Registered User
Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
Squaring up and aligning PB Frame ?
hey guys, im currently putting my PB parts together, all has been pretty smooth so far, the guys at Porterbuilt are amazing to work with.
I need help on how to make sure the frame comes back together squared and aligned |
05-16-2020, 03:13 PM | #2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Squaring up and aligning PB Frame ?
My 64's set-up is PF front x-member, LWB-to-SWB frame chop, & rear frame 'Z'. Not exactly apple-to-apples but in the same spirit...
I did diagonal measurements based off of factory holes on each rail/side. I did diagonal measurements from: Front rail ends to rear rail ends Front rail ends to back cab mounts From back cab mounts to rear rail ends The frames weren't perfect from the manufacturer (mine was off <1/8" when measured as a LWB). I was able to get within 1/16" diagonally once modified.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
05-16-2020, 08:29 PM | #3 |
Registered User
Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
Re: Squaring up and aligning PB Frame ?
Scoti when taking these measurements. Was the truck on the ground as a roller or can it be done on jack stands ?
|
05-16-2020, 08:44 PM | #4 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Squaring up and aligning PB Frame ?
Quote:
My hardware was all yellow zinc plated. I tagged each bolt w/a Sharpie as they were torqued down once it was squared. This allowed me to go back & double check what was torqued & what was just temporarily secured.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
05-17-2020, 12:45 AM | #5 |
Registered User
Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
Re: Squaring up and aligning PB Frame ?
You did this during final assembly I’m assuming. Not for mock up ?
|
05-17-2020, 01:40 AM | #6 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Squaring up and aligning PB Frame ?
Quote:
Loosely assembling & squaring the chassis? It was done for both mock-up & final assembly. Eliminate surprises when possible.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
05-19-2020, 02:40 PM | #7 |
Registered User
Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
Re: Squaring up and aligning PB Frame ?
Thanks brother
|
Bookmarks |
|
|