Canadian frame VIN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vet57air · 07-21-2020, 07:49 PM

Name: IMG_2681.jpg
Views: 723
Size: 65.4 KB

I have a Canadian 66 C10 that I need to stamp the VIN into the new custom frame. Anybody have a picture of a Canadian C10 frame VIN. From what I know the factory didn't stamp the whole VIN (as on the VIN body plate) into the frame and need to see what they included.

**The Rocknrod** · 07-21-2020, 07:58 PM

Canadian VIN:
https://67-72chevytrucks.com/vboard/...84&postcount=2
Some info and pic in this thread also - https://67-72chevytrucks.com/vboard/...d.php?t=734837

vet57air · 07-21-2020, 08:39 PM

Quote:

Originally Posted by The Rocknrod

Canadian VIN:
https://67-72chevytrucks.com/vboard/...84&postcount=2
Some info and pic in this thread also - https://67-72chevytrucks.com/vboard/...d.php?t=734837

Thank you, but I have seen that. Unless I am missing something (often do) the link is to decode a Canadian C10 VIN (on the door jam tag)? What I am after is a picture of a Canadian VIN on the frame. I believe Canadian C10 frame VIN's include the sequential number truck number but don't include things like cylinder#, series, GVW etc. The body tag VIN has more information than the frame VIN. Just not sure what to include.

geezer#99 · 07-21-2020, 09:54 PM

My old 67 gmc was Canadian built. It had the last 6 numbers of the vin stamped on the top of the frame rail beside the steering box.

Where in BC are you located?

vet57air · 07-21-2020, 10:57 PM

Quote:

Originally Posted by geezer#99

My old 67 gmc was Canadian built. It had the last 6 numbers of the vin stamped on the top of the frame rail beside the steering box.

Where in BC are you located?

That is good information thank you. Sounds like they just stamped the sequential number of your truck on the frame. I'm not far away, Port Alberni.

short&wide65 · 07-21-2020, 11:21 PM

I have the VIN or part of it stamped on the frame of my Oshawa, Ontario built 1965 GMC. I can try take a picture of it but it is currently in storage. I'll look to see if I have one that I have taken in the past as well. IIRC, it's stamped on the side of the frame and not the top on mine.

The Canadian GMC's were actually Chevrolets underneath with the trailing arm rear suspension and Chevrolet inline 6 or V8.

vet57air · 07-21-2020, 11:48 PM

Quote:

Originally Posted by short&wide65

I have the VIN or part of it stamped on the frame of my Oshawa, Ontario built 1965 GMC. I can try take a picture of it but it is currently in storage. I'll look to see if I have one that I have taken in the past as well. IIRC, it's stamped on the side of the frame and not the top on mine.

The Canadian GMC's were actually Chevrolets underneath with the trailing arm rear suspension and Chevrolet inline 6 or V8.

That would be awesome.

short&wide65 · 07-22-2020, 02:25 PM

Quote:

Originally Posted by vet57air

That would be awesome.

Unfortunately, due to the way the frame is currently stored I wasn't able to see the number. I looked through my photos but couldn't find anything there either. I'm sorry I couldn't be of more help.

**The Rocknrod** · 07-23-2020, 02:25 PM

This may answer some questions - http://67-72chevytrucks.com/vboard/s...12&postcount=3

vet57air · 07-23-2020, 03:25 PM

Quote:

Originally Posted by The Rocknrod

This may answer some questions - http://67-72chevytrucks.com/vboard/s...12&postcount=3

Thank you. I have seen this in my research, but it appears to be a U.S. truck.
Canadian trucks VIN are configured a little different.

**The Rocknrod** · 07-28-2020, 02:50 PM

Why do want a picture of a Canadian C10 frame VIN stamp?

**The Rocknrod** · 07-29-2020, 08:03 AM

Oh by the way VIN stamping is illegal - Thread locked.

**old Rusty C10** · 07-30-2020, 04:01 PM

If you made a custom frame i do not think you need to stamp anything, id keep documentation tho in case youre ever questioned.. and i live in the US so it may be a completely different set of laws

07-21-2020, 07:49 PM	#1
vet57air Registered User Join Date: Oct 2018 Location: B.C. Canada Posts: 206	Canadian frame VIN I have a Canadian 66 C10 that I need to stamp the VIN into the new custom frame. Anybody have a picture of a Canadian C10 frame VIN. From what I know the factory didn't stamp the whole VIN (as on the VIN body plate) into the frame and need to see what they included.

07-21-2020, 07:58 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Canadian frame VIN Canadian VIN: https://67-72chevytrucks.com/vboard/...84&postcount=2 Some info and pic in this thread also - https://67-72chevytrucks.com/vboard/...d.php?t=734837 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-21-2020, 09:54 PM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Canadian frame VIN My old 67 gmc was Canadian built. It had the last 6 numbers of the vin stamped on the top of the frame rail beside the steering box. Where in BC are you located?

07-21-2020, 11:21 PM	#6
short&wide65 Registered User Join Date: Nov 2013 Location: Ontario, Canada Posts: 113	Re: Canadian frame VIN I have the VIN or part of it stamped on the frame of my Oshawa, Ontario built 1965 GMC. I can try take a picture of it but it is currently in storage. I'll look to see if I have one that I have taken in the past as well. IIRC, it's stamped on the side of the frame and not the top on mine. The Canadian GMC's were actually Chevrolets underneath with the trailing arm rear suspension and Chevrolet inline 6 or V8. __________________ 1965 GMC 910 Short Fleetside. 230 CI 4-speed.

07-28-2020, 02:50 PM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Canadian frame VIN Why do want a picture of a Canadian C10 frame VIN stamp? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-23-2020, 02:25 PM	#9
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Canadian frame VIN This may answer some questions - http://67-72chevytrucks.com/vboard/s...12&postcount=3 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-29-2020, 08:03 AM	#12
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Canadian frame VIN Oh by the way VIN stamping is illegal - Thread locked. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-30-2020, 04:01 PM	#13
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Canadian frame VIN If you made a custom frame i do not think you need to stamp anything, id keep documentation tho in case youre ever questioned.. and i live in the US so it may be a completely different set of laws __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.