GA Parting 1971 Suburban

[southern parts]

As the title says parting 1971 Suburban. Clutch delete plug $10 plus shipping
Automatic column $125 plus shipping SOLD
Power brake booster brackets $45 plus shipping
V8 motor mounts $35 plus shipping
New triplus core support $150 no shipping
Metal interior door panels $125 plus shipping (sold)
Parchment sun visors $40 plus shipping
67-68 type bench seat core $75 no shipping
rear barn doors , some Rust and damage but complete. $300 no shipping
some other parts available ask for pricing.

[Madkidd007]

I’m interested in the seat for sure. I’d say I’d take it but two questions. Tim ever get up that way since I live below him now? And can you get a picture of the seat from the drivers side?

And what’s the condition on the bottom of the B-pillars, both driver and passenger, 3rd door hinges?

[Willys_MB]

Does the AM radio work? How much shipped to 83646?

Thank you

[southern parts]

Mad kid- I was at Tim's house yesterday but I probably won't see him again until November at the swap meet in Commerce. Both b-pillars have rust at the bottom. Pictures of the driver side seat. The front foot on the brackets is Rusted off.

Willie's _MB- working condition of the radio is unknown. $50 plus shipping. I can fit it in a medium flat-rate box

CG- I have to window frames from a Suburban already cut out. Passenger side is complete. The driver side has been cut at the top Corner above the vent window $100 for both + shipping.

[CG]

I would be interested in both front door window frames if you would separate from the doors. I have good truck doors I’d like to convert to burb doors.

[Willys_MB]

I'll pass on the radio. I already have one that doesn't work

[Madkidd007]

I’m out on the seat, ironically I sold the exact pieces that are bad. Whenever you’re back around the burb can you still let me see the condition. Also the 3rd door hinge condition and price? I know if I don’t buy them you’ll get an inquiry soon enough from someone else. Lastly how is the inner rocker on the 3rd and 4th floor

[southern parts]

$150 on the b piller and 3rd door hinges.
I'm not going to cut into the floor because I'm going to use it in my 68 4x4.
$150 on the Manuel throttle set up.

[Madkidd007]

Originally Posted by southern parts

$150 on the b piller and 3rd door hinges.
I'm not going to cut into the floor because I'm going to use it in my 68 4x4.
$150 on the Manuel throttle set up.

I’ll go the $150 on the pillar/hinges. Can you just look on the bottom side when you get a chance and make sure it’s not gone where it bolts to the floor? I’m wanting to use this to fix mine and cut my original up to build the 4th door. And I guess that’s the burb you were talking about the steering on. But as long as the bottom isn’t eat up underneath that’s a firm I’ll take it.

[allchevy1]

I'll take that clutch delete plug. Pm me you you pay pal. How much for the brake pedal assembly?

[CG]

I’m going to hold off on the window frames for now. But if the manual throttle is
Complete from pedal to carb and knobs I’ll take that. I only do postal money order though if that works for you. Shoot me a pm on total. Not sure if the throttle word comes off of the gauge surround, I’d like that too

[best view]

Price on antenna shipped to 02367 ken

[southern parts]

Madkidd - i`ll try to get it out and get a picture tomorrow

allchevy1 - $35 plus shipping on the brake pedal assembly. i can put the clutch delete in with it if you want it.

CG - the manual throttle just runs down to the gas pedal. the throttle escutcheon will come with it.

best view - sorry , i`m keeping the antenna for one of mine

[CG]

Ok sounds good. I had this assembly at one time to replace the missing one my burb came with. And for some duffas reason I let it go. Hopefully you can cram it all in a the smallest USPS box possible so the dadgum shipping doesn't eat me alive =)

Shoot me a PM with total and your address, Ill shoot you out a USPS money order.

[southern parts]

CG - I had to take the plastic part of the gas pedal loose but now it will fit in a medium flat-rate box. The throttle escutcheon is taped to the inside of the lid. $165 shipped. I will p.m. you with my mailing address later today if you're still interested.

Madkidd- the bottom of the b-pillar is Rusty

[southern parts]

Here's a better look at the bottom and the top of the b-pillar

[CG]

Looks good. Shoot me a pm with your info

[Tmend]

Would you be willing to cut out dash center section?. If so can I get some better photos of section. Thanks much

[southern parts]

Tmend- Here's another one that's allready out. I can cut it wherever you'd like. $75 plus shipping.

Allchevy- are you interested in the pedal assembly?

[Tmend]

I would be interested in a ochre color one. I would like it cut at steering column loop and directly above that and opposite side just before mid way above and below glove box opening. Same as pictured. Please post photo of dash center section condition. Thank you for your time

[southern parts]

I have someone interested in the entire Dash section with firewall down to the bottom of the a-pillars and the entire roof. If that does not pan out I will PM you about the dash section.

[CG]

Just sent you the money for the manual throttle control assembly Via USPS with a US postal money order ... Thanks.

[anew4961]

how about the back up light housings ?

[southern parts]

Bump

[jimmy70]

How much for both fuel tank spacers shipped to 48092 if you still have them? thx