CT 1969 CST/10 Part Out 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Leigh222 · 01-13-2021, 01:13 PM

Hey Everyone,
I'm beginning to tear down a '69 CST K10 the truck was a bucket seat truck but I'm going to be holding onto the seats for now. The truck was rusty with 25% of the front cowl/firewall being spray foam with a piece of vinyl siding under driver side inner cowl to help drain water away from drivers feet. With that being said the body is completely toast and some other items are a bit rusty. I am listing below a few of the items I have removed ready to go. All prices unless noted have shipping included for lower 48.

DG4 Stainless Mirror Arms $75
Cab Wiring Harness/Fuse Panel $85
Fender to Cab Seals $30
Manual Throttle $85 (End fitting is broken off but included, it does have barrell clip but it is rusty, can't seem to get wire inside to move but the knob has twising movement still. It as a deluxe Knob.)
Bucket Seat Carpet Rings $65 (5 Total Rings with screws)
Auto Column $150 Shipping Not included (Out of Different Truck)
Brake/Clutch Pedals $70

Let me know if there is something you are looking for and I'll see if it is usable.

Leigh222 · 01-13-2021, 01:19 PM

111

Leigh222 · 01-13-2021, 01:20 PM

222

Leigh222 · 01-13-2021, 01:22 PM

333

duke10 · 01-13-2021, 01:33 PM

How is the glass in the mirror head that isn't rusty?
I also need the oil dipstick tube.
Let me know. Shipping to 92106
Thank you.

**LockDoc** · 01-13-2021, 01:47 PM

-
Be sure and save the under floor brace that the bucket seats bolted to. They are hard to find.

LockDoc

Leigh222 · 01-13-2021, 01:49 PM

I think the motor was repaced at some point tge dipstick looks like a passenger car one correct me if I'm wrong.

Willys_MB · 01-13-2021, 02:04 PM

How much for the radio and associated wiring/brackets/knobs/speaker/etc. shipped to 83646?

Leigh222 · 01-13-2021, 03:39 PM

Willy, I'll look to get the radio pulled tomorrow and let you know price.

Willys_MB · 01-13-2021, 03:44 PM

Quote:

Originally Posted by Leigh222

Willy, I'll look to get the radio pulled tomorrow and let you know price.

Sounds good, thank you!

fun in dirt · 01-13-2021, 05:50 PM

What kind of shape is this front fender, front lower trim in? Price shipped?

Leigh222 · 01-13-2021, 06:00 PM

Front fenders were shot rust everywhere so they were scraped. Trim was put back on truck using self tapers through face of trim. Sorry to disapoint but thanks for asking.

best view · 01-13-2021, 09:52 PM

Antenna also save roof light stuff

Leigh222 · 01-13-2021, 10:58 PM

Antenna was aftermarket and broken.

**too much stuff** · 01-14-2021, 09:34 AM

How good is the steering column that is in the truck?

blap · 01-14-2021, 05:02 PM

How much for the transfer case shift knob & carpet ring & boot

Leigh222 · 01-14-2021, 05:21 PM

Blap I believe the tcase is a rockwell t221 are you still interested?

**Gary 70 Jimmy** · 01-14-2021, 08:54 PM

Looking for 1 rear spring hanger one of mine was cut

Leigh222 · 01-15-2021, 09:14 AM

Quote:

Originally Posted by Gary 70 Jimmy

Looking for 1 rear spring hanger one of mine was cut

I'm looking to sell the frame as a roller but if I have no interest or if the frame is too far gone I will be sure to take a look at the hangers for you.

blap · 01-15-2021, 09:46 AM

Yes I'm interested

Leigh222 · 01-19-2021, 11:47 PM

Quote:

Originally Posted by blap

Yes I'm interested

T221 boot ring and knob.

Leigh222 · 01-20-2021, 09:13 AM

Radio, speaker and bracket SOLD

Clutch Z-Bar, pivot ball and frame bracket SOLD

Any offers on above listed parts?

Anybody else need anything?

**68Custom** · 01-21-2021, 08:30 AM

I'll bite again. What's the condition of the front bumper brackets? Specifically the long brackets that mount to the sides. I don't need the small brackets on the top.

Thanks,

Aaron

Leigh222 · 01-21-2021, 10:30 AM

Quote:

Originally Posted by 68Custom

I'll bite again. What's the condition of the front bumper brackets? Specifically the long brackets that mount to the sides. I don't need the small brackets on the top.

Thanks,

Aaron

Aaron some pitting on the brackets. Does $55 shipped work?

C10_ForDad · 01-16-2021, 05:51 PM

Is the headlight and front turn signal harness complete?

Thank you

01-13-2021, 01:13 PM	#1
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	1969 CST/10 Part Out 4x4 Hey Everyone, I'm beginning to tear down a '69 CST K10 the truck was a bucket seat truck but I'm going to be holding onto the seats for now. The truck was rusty with 25% of the front cowl/firewall being spray foam with a piece of vinyl siding under driver side inner cowl to help drain water away from drivers feet. With that being said the body is completely toast and some other items are a bit rusty. I am listing below a few of the items I have removed ready to go. All prices unless noted have shipping included for lower 48. DG4 Stainless Mirror Arms $75 Cab Wiring Harness/Fuse Panel $85 Fender to Cab Seals $30 Manual Throttle $85 (End fitting is broken off but included, it does have barrell clip but it is rusty, can't seem to get wire inside to move but the knob has twising movement still. It as a deluxe Knob.) Bucket Seat Carpet Rings $65 (5 Total Rings with screws) Auto Column $150 Shipping Not included (Out of Different Truck) Brake/Clutch Pedals $70 Let me know if there is something you are looking for and I'll see if it is usable. Attached Images

01-13-2021, 01:19 PM	#2
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 111 Attached Images

01-13-2021, 01:20 PM	#3
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 222 Attached Images

01-13-2021, 01:22 PM	#4
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 333 Attached Images

01-13-2021, 01:33 PM	#5
duke10 Active Member Join Date: Aug 2003 Location: san diego Posts: 833	Re: 1969 CST/10 Part Out 4x4 How is the glass in the mirror head that isn't rusty? I also need the oil dipstick tube. Let me know. Shipping to 92106 Thank you.

01-13-2021, 01:47 PM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,852	Re: 1969 CST/10 Part Out 4x4 - Be sure and save the under floor brace that the bucket seats bolted to. They are hard to find. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-13-2021, 01:49 PM	#7
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 I think the motor was repaced at some point tge dipstick looks like a passenger car one correct me if I'm wrong. Attached Images

01-13-2021, 02:04 PM	#8
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 1969 CST/10 Part Out 4x4 How much for the radio and associated wiring/brackets/knobs/speaker/etc. shipped to 83646? __________________ 1968 GMC C2500 Long Bed Fleetside

01-13-2021, 03:39 PM	#9
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 Willy, I'll look to get the radio pulled tomorrow and let you know price.

01-13-2021, 05:50 PM	#11
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,122	Re: 1969 CST/10 Part Out 4x4 What kind of shape is this front fender, front lower trim in? Price shipped? Attached Images __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" [B]'85 C10 [B] "Corpse" '01 2500 Suburban ...party wagon & tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

01-13-2021, 06:00 PM	#12
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 Front fenders were shot rust everywhere so they were scraped. Trim was put back on truck using self tapers through face of trim. Sorry to disapoint but thanks for asking.

01-13-2021, 09:52 PM	#13
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,167	Re: 1969 CST/10 Part Out 4x4 Antenna also save roof light stuff

01-13-2021, 10:58 PM	#14
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 Antenna was aftermarket and broken.

01-14-2021, 09:34 AM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,801	Re: 1969 CST/10 Part Out 4x4 How good is the steering column that is in the truck? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-14-2021, 05:02 PM	#16
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 1969 CST/10 Part Out 4x4 How much for the transfer case shift knob & carpet ring & boot



Register or Log In To remove these advertisements.

01-14-2021, 05:21 PM	#17
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 Blap I believe the tcase is a rockwell t221 are you still interested?

01-14-2021, 08:54 PM	#18
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: 1969 CST/10 Part Out 4x4 Looking for 1 rear spring hanger one of mine was cut Attached Images __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

01-15-2021, 09:46 AM	#20
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 1969 CST/10 Part Out 4x4 Yes I'm interested

01-20-2021, 09:13 AM	#22
Leigh222 Registered User Join Date: Oct 2017 Location: Hartford, CT Posts: 105	Re: 1969 CST/10 Part Out 4x4 Radio, speaker and bracket SOLD Clutch Z-Bar, pivot ball and frame bracket SOLD Any offers on above listed parts? Anybody else need anything?

01-21-2021, 08:30 AM	#23
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Re: 1969 CST/10 Part Out 4x4 I'll bite again. What's the condition of the front bumper brackets? Specifically the long brackets that mount to the sides. I don't need the small brackets on the top. Thanks, Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

01-16-2021, 05:51 PM	#25
C10_ForDad Registered User Join Date: Sep 2019 Location: Saint George Posts: 50	Re: 1969 CST/10 Part Out 4x4 Is the headlight and front turn signal harness complete? Thank you

Register or Log In To remove these advertisements.