Check out my wife's box! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Randy70C-10* · 12-22-2003, 12:37 AM

Heater box that is. Finished it today, used Sherwin Williams enamel after spending a week smoothing it out.

*Randy70C-10* · 12-22-2003, 12:38 AM

ratrod67 · 12-22-2003, 12:44 AM

That looks good. How'd you smooth it?

*Randy70C-10* · 12-22-2003, 12:46 AM

They're fiberglass, all you need is alot of patience, a case of beer, 100 grit sand paper, 320 grit, and 10 coats of primer. (so you can sand, and prime, and sand, and prime, and get drunk.

Rooster's 67 · 12-22-2003, 12:56 AM

or some high build catalyst primer,a fifth of Crown Royal, and a lot of wet dry sand paper on a block

dinnut · 12-22-2003, 12:57 AM

that looks sweet!

724x4a/cchevy · 12-22-2003, 01:02 AM

That looks really good! kinda custom "shaved" looking!

**lock** · 12-22-2003, 01:13 AM

Tricked me!

**old Rusty C10** · 12-22-2003, 01:15 AM

um your wife's box looks good i like the smooth clean look all glossy and ready to go. How long til ya stick it in ? ( the truck that is)

724x4a/cchevy · 12-22-2003, 01:18 AM

smooth nice and round! i like a box that has come curve to it.!

724x4a/cchevy · 12-22-2003, 01:18 AM

What kinda box are we talking about again? LOL!

*Randy70C-10* · 12-22-2003, 01:19 AM

Bob- I'm going to give it a couple days to get good and hard. (The paint)

*rage'nrat638* · 12-22-2003, 01:24 AM

YOU GUY'S ARE SILLY.......ONCE YOU GO BLACK YOU NEVER GO BACK......

71-longbed · 12-22-2003, 02:07 AM

should i ...should i .....ok .... tight lookin box randy ...:p

i couldnt help myself

jack'd up · 12-22-2003, 02:22 AM

Damn I knew I was doing it wrong I always got drunk and then painted and then sanded. LOL. Looks great.

**Canadian694x4** · 12-22-2003, 02:29 AM

Randy/Bob....LMAO!!!

Injected68LS1 · 12-22-2003, 04:28 AM

I've always loved a good looking box. If you have any extra boxes let me know. :P

67cst · 12-22-2003, 05:52 AM

what a nice box, i hope she appreciates all the effort you put into making it that nice...you could eat off that thing its so clean

**Palf70Step** · 12-22-2003, 09:01 AM

Looking good Randy! I'll behave

CPNEJR · 12-22-2003, 10:12 AM

Nice looks great

*Gee_Emm* · 12-22-2003, 11:02 AM

Right about now she will be telling you she changed her mind and wants AC

:p

*Randy70C-10* · 12-22-2003, 11:06 AM

That's grounds for a beat'n.

Thanks for the cool comments!

12-22-2003, 12:37 AM	#1
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Check out my wife's box! Heater box that is. Finished it today, used Sherwin Williams enamel after spending a week smoothing it out.

12-22-2003, 12:56 AM	#5
Rooster's 67 Registered User Join Date: Sep 2003 Location: DFW Posts: 765	or some high build catalyst primer,a fifth of Crown Royal, and a lot of wet dry sand paper on a block __________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

12-22-2003, 12:57 AM	#6
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	that looks sweet! __________________ 70 longbed 496/th400/Ford 9"

12-22-2003, 01:02 AM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	That looks really good! kinda custom "shaved" looking! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-22-2003, 01:15 AM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	um your wife's box looks good i like the smooth clean look all glossy and ready to go. How long til ya stick it in ? ( the truck that is) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-22-2003, 12:38 AM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320

12-22-2003, 12:44 AM	#3
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	That looks good. How'd you smooth it?

12-22-2003, 12:46 AM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	They're fiberglass, all you need is alot of patience, a case of beer, 100 grit sand paper, 320 grit, and 10 coats of primer. (so you can sand, and prime, and sand, and prime, and get drunk.

12-22-2003, 01:13 AM	#8
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Tricked me!

12-22-2003, 01:18 AM	#10
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	smooth nice and round! i like a box that has come curve to it.! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-22-2003, 01:19 AM	#12
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Bob- I'm going to give it a couple days to get good and hard. (The paint)

12-22-2003, 01:24 AM	#13
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	YOU GUY'S ARE SILLY.......ONCE YOU GO BLACK YOU NEVER GO BACK......

12-22-2003, 02:07 AM	#14
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	should i ...should i .....ok .... tight lookin box randy ...:p i couldnt help myself __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

12-22-2003, 02:22 AM	#15
jack'd up Registered User Join Date: May 2003 Location: DFW Posts: 127	Damn I knew I was doing it wrong I always got drunk and then painted and then sanded. LOL. Looks great.

12-22-2003, 02:29 AM	#16
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Randy/Bob....LMAO!!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.



Register or Log In To remove these advertisements.

12-22-2003, 04:28 AM	#17
Injected68LS1 Registered User Join Date: Jul 2003 Location: So. Cal. Posts: 389	I've always loved a good looking box. If you have any extra boxes let me know. :P __________________ 1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album

12-22-2003, 05:52 AM	#18
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	what a nice box, i hope she appreciates all the effort you put into making it that nice...you could eat off that thing its so clean __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-22-2003, 09:01 AM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,269	Looking good Randy! I'll behave __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-22-2003, 10:12 AM	#20
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Nice looks great __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

12-22-2003, 11:02 AM	#21
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Right about now she will be telling you she changed her mind and wants AC :p

12-22-2003, 11:06 AM	#22
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's grounds for a beat'n. Thanks for the cool comments!

Register or Log In To remove these advertisements.