47-55.1 Looking for gear shifter, turn signal, tilt lever kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Greyhound101 · 06-17-2021, 02:00 PM

I have what I believe to be an early 80's model GM steering column in my '49 3100. I'm wanting to upgrade my steering column gear shifter, turn lever and tilt lever to an all chrome kit. Problem is, I can't find a turn lever for that kit that isn't the multi-function lever. I don't need the multi-function lever, I have a dedicated wiper knob and no cruise control. I need a simple, standard lever with the 'pin' style end that inserts and locks into the column. See pic for detail.

crossfire84 · 06-17-2021, 06:12 PM

Well I made my own.

**mr48chev** · 06-17-2021, 08:06 PM

With that column I'd have to believe that is the only way you will get a turn signal handle that is just turn signal dimmer switch flipper.

Crossfire84 is going to have to explain how to get it done though.

duramax55 · 06-17-2021, 10:02 PM

greyhound101 simply cut end of and tap in threads

PDW HOTRODS · 06-17-2021, 11:57 PM

greyhound101 simply cut end of and tap in threads

That's what I did and it worked great.

Greyhound101 · 06-19-2021, 10:54 PM

Quote:

Originally Posted by duramax55

greyhound101 simply cut end of and tap in threads

There are no threads on the lever. It presses in and locks.

1project2many · 06-18-2021, 10:21 AM

You're looking for a lever with an end like the top picture, but it has to be chrome and look something like the bottom picture?

77-81 G and A body

https://www.ebay.com/itm/332129788503

Greyhound101 · 06-19-2021, 10:56 PM

Quote:

Originally Posted by 1project2many

You're looking for a lever with an end like the top picture, but it has to be chrome and look something like the bottom picture?

77-81 G and A body

https://www.ebay.com/itm/332129788503

If I could find something like that but in the style in my first post, I'd jump on it. Looks like I'll have to machine my own, unfortunately.

**mr48chev** · 06-20-2021, 06:12 PM

I'm wondering if that non cruise handle might be a tad hard to find in a wrecking yard. I don't think my buddy who's family owned the local Chevy dealership for a lot of years ever sold one of those G bodies without cruise and tilt.

I'd still be walking though the local pick a part looking for one to get the shaft off though. You already know how to pop it out of the switch so that part should be easy.

Greyhound101 · 06-20-2021, 07:07 PM

Quote:

Originally Posted by mr48chev

I'm wondering if that non cruise handle might be a tad hard to find in a wrecking yard. I don't think my buddy who's family owned the local Chevy dealership for a lot of years ever sold one of those G bodies without cruise and tilt.

I'd still be walking though the local pick a part looking for one to get the shaft off though. You already know how to pop it out of the switch so that part should be easy.

I'm sure you're right. That's most likely why it's hard to find. I'll probably just buy the standard kit that's available and cut the flat end off the new part and the 'pin' end off what I already have and machine them both to mate together.

Greyhound101 · 06-28-2021, 09:21 PM

Quote:

Originally Posted by Greyhound101

I'm sure you're right. That's most likely why it's hard to find. I'll probably just buy the standard kit that's available and cut the flat end off the new part and the 'pin' end off what I already have and machine them both to mate together.

Done.

1project2many · 06-21-2021, 08:21 AM

The original A car non-cruise factory knob unscrewed from the lever. Maybe it's as simple as unscrewing an aluminum knob from one lever and threading it onto the other?

duramax55 · 06-28-2021, 10:30 PM

greyhound did you epoxy it in or just tight fit? Nice job

Greyhound101 · 06-29-2021, 09:12 AM

Quote:

Originally Posted by duramax55

greyhound did you epoxy it in or just tight fit? Nice job

Drilled 5/32" hole in the lever end 3/8" deep and machined the 'pin' end for an interference fit. Applied loctite 638 and pressed it together.

1project2many · 06-29-2021, 05:00 AM

That looks nice. It was definitely worth the effort.

06-17-2021, 02:00 PM	#1
Greyhound101 Registered User Join Date: Sep 2019 Location: El Dorado, AR Posts: 30	Looking for gear shifter, turn signal, tilt lever kit I have what I believe to be an early 80's model GM steering column in my '49 3100. I'm wanting to upgrade my steering column gear shifter, turn lever and tilt lever to an all chrome kit. Problem is, I can't find a turn lever for that kit that isn't the multi-function lever. I don't need the multi-function lever, I have a dedicated wiper knob and no cruise control. I need a simple, standard lever with the 'pin' style end that inserts and locks into the column. See pic for detail. Attached Images

06-17-2021, 06:12 PM	#2
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: Looking for gear shifter, turn signal, tilt lever kit Well I made my own. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

06-17-2021, 08:06 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Looking for gear shifter, turn signal, tilt lever kit With that column I'd have to believe that is the only way you will get a turn signal handle that is just turn signal dimmer switch flipper. Crossfire84 is going to have to explain how to get it done though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-17-2021, 10:02 PM	#4
duramax55 Registered User Join Date: Nov 2017 Location: Aubigny Posts: 212	Re: Looking for gear shifter, turn signal, tilt lever kit greyhound101 simply cut end of and tap in threads

06-17-2021, 11:57 PM	#5
PDW HOTRODS Registered User Join Date: Nov 2006 Location: Sutherlin Oregon Posts: 502	Re: Looking for gear shifter, turn signal, tilt lever kit greyhound101 simply cut end of and tap in threads That's what I did and it worked great.

06-18-2021, 10:21 AM	#7
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Looking for gear shifter, turn signal, tilt lever kit You're looking for a lever with an end like the top picture, but it has to be chrome and look something like the bottom picture? 77-81 G and A body https://www.ebay.com/itm/332129788503 Last edited by 1project2many; 06-18-2021 at 11:14 AM.

06-20-2021, 06:12 PM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Looking for gear shifter, turn signal, tilt lever kit I'm wondering if that non cruise handle might be a tad hard to find in a wrecking yard. I don't think my buddy who's family owned the local Chevy dealership for a lot of years ever sold one of those G bodies without cruise and tilt. I'd still be walking though the local pick a part looking for one to get the shaft off though. You already know how to pop it out of the switch so that part should be easy. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-21-2021, 08:21 AM	#12
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Looking for gear shifter, turn signal, tilt lever kit The original A car non-cruise factory knob unscrewed from the lever. Maybe it's as simple as unscrewing an aluminum knob from one lever and threading it onto the other?

06-28-2021, 10:30 PM	#13
duramax55 Registered User Join Date: Nov 2017 Location: Aubigny Posts: 212	Re: Looking for gear shifter, turn signal, tilt lever kit greyhound did you epoxy it in or just tight fit? Nice job

06-29-2021, 05:00 AM	#15
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Looking for gear shifter, turn signal, tilt lever kit That looks nice. It was definitely worth the effort.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.