Stake Pocket dimensions?

[brian1115]

Can anyone tell me the stake pocket dimensions for a 86 short box? Thinking about relocation the fuel filler to one of them in a flush fit installation.

I don't have a bed that is why I'm asking

[Danmcg]

the front stake pocket doesn't go to the floor, but let me know what dimensions you want and I can measure one up.

[brian1115]

I'm talking about the rear stake pocket. Does it not run all the way from the top to the underside of the bed?

[Danmcg]

Sorry, yes it runs through the bed floor. I measured about 3" x 3.5" with the 3" being the front to back dimension.
I should add that I don't know how much if any the tail light housing takes up of that space

[brian1115]

Alright thanks a lot for the measurement. Just trying to work things out in my head before hand.

[ACS]

It could be done. Here’s some photos down the hole.

[brian1115]

Thanks a bunch for the pics. It was either the stake pockets or the taillights with a hinge. I'll see what is easier. In reality I should have kept with the stock tank location.