|
10-12-2021, 10:55 PM | #1 |
Registered User
Join Date: Aug 2020
Location: Frankfort, Ill
Posts: 143
|
WIW Panel truck seats
I'm debating if I should switch out the original seats from my 68 Panel truck for some later model Silverado seats. If I go with the newer seats, I'll probably sell these. They are in decent shape but the seat covers do not match, different material. They have the original mounts and the passenger seat flips up forward so that you can get in the back of the truck. Not sure what they are worth if I do sell them.
__________________
It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust. |
10-13-2021, 01:33 PM | #2 |
Senior Member
Join Date: Mar 2009
Location: Brigantine NJ
Posts: 822
|
Re: WIW Panel truck seats
They look like blazer utility buckets. Not sure if the tracks are the same as the blazer but the flip up passenger seat sounds just like a blazer. I’ve sold the blazer utility buckets for $350-$450 for the pair.
__________________
Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii |
10-13-2021, 08:45 PM | #3 |
Senior Member
Join Date: Aug 2007
Location: Warren,Michigan
Posts: 1,158
|
Re: WIW Panel truck seats
Bucket seats / sport bucket over utility / are in high demand especially if still in good shape like yours. I know that outfitted with original seat tracks you can easily ask $800 to $1000 for the pair. If you follow this forum you can search bucket seats that have either sold or are still for sale. Give it a shot / you'll be suprised what the going prices are. Good luck!
|
10-14-2021, 11:39 AM | #4 |
Registered User
Join Date: Aug 2020
Location: Frankfort, Ill
Posts: 143
|
Re: WIW Panel truck seats
Thanks guys. That gives me at least a starting point. I found the option # on the SPID:
4AM2BA HD seat equip I can't seem to find much info on the option number. I'm pretty sure they were the stock seats. Here are a few more pics:
__________________
It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust. |
10-18-2021, 06:58 AM | #5 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: WIW Panel truck seats
The passenger seat was an option in panel trucks. Panels that didn't get that option have no bumps in the passenger side floor to receive the seat mounts, just a smooth floor. I'm pretty sure the tracks are longer/different from K/5s. Not sure on value for utility buckets these days. I think $300-$400 is the high end here. Definitely not worth as much as sport buckets and the brackets aren't K/5.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
Bookmarks |
|
|