Anyone recognize this part? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 11-04-2021, 11:27 PM

I found this tube in the back of a 75-ish K-5 blazer in a junkyard. I was thinking it was a stove pipe for the heat riser system for 67-72. But after looking at it, it looks similar but not the same. There is a little cup on the bottom that the tube slips into. The tube is belled out at the top and necked down at the bottom, as if something slips into the top part and tube slips into another part on bottom.

Anyone have any idea what it is?
Posted via Mobile Device

Dead Parrot · 11-05-2021, 08:21 AM

It does look like a heat stove pipe. Very possible it wandered in from a totally different vehicle. I have found picked over electronic dash panels in the cabs of mid 70's trucks and rear end parts in the beds of trucks that still had complete rear ends.

The small part kind of looks like an exhaust piece that someone took a saw to to let the stove pipe fit something.

**THI** · 11-05-2021, 10:21 AM

The long curved one is a small block manifold to air cleaner heat stove for the "low dump" log manifolds

wazzabie · 11-05-2021, 12:09 PM

Quote:

Originally Posted by chev-obsession

I found this tube in the back of a 75-ish K-5 blazer in a junkyard. I was thinking it was a stove pipe for the heat riser system for 67-72. But after looking at it, it looks similar but not the same. There is a little cup on the bottom that the tube slips into. The tube is belled out at the top and necked down at the bottom, as if something slips into the top part and tube slips into another part on bottom.

Anyone have any idea what it is?
Posted via Mobile Device

A junk yard in or near Kennewick? Is there much left of the K5?

**Corts60** · 11-06-2021, 01:05 PM

Quote:

Originally Posted by wazzabie

A junk yard in or near Kennewick? Is there much left of the K5?

There is or used to be a real gem of a junkyard in sunnyside. Lots of classics in there. Can’t remember the name or what street. Last time I was there was about 15 years ago.

**dagnabbitt** · 11-06-2021, 11:10 PM

Looks like described above to me, albeit not as curved.

83GMCK2500 · 11-06-2021, 11:57 AM

Looks like what I still have on my '83, the riser pipe from passenger manifold up to snorkel on air cleaner pan.

11-04-2021, 11:27 PM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,513	Anyone recognize this part? I found this tube in the back of a 75-ish K-5 blazer in a junkyard. I was thinking it was a stove pipe for the heat riser system for 67-72. But after looking at it, it looks similar but not the same. There is a little cup on the bottom that the tube slips into. The tube is belled out at the top and necked down at the bottom, as if something slips into the top part and tube slips into another part on bottom. Anyone have any idea what it is? Posted via Mobile Device Attached Images Last edited by chev-obsession; 11-05-2021 at 12:06 AM.

11-05-2021, 08:21 AM	#2
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,611	Re: Anyone recognize this part? It does look like a heat stove pipe. Very possible it wandered in from a totally different vehicle. I have found picked over electronic dash panels in the cabs of mid 70's trucks and rear end parts in the beds of trucks that still had complete rear ends. The small part kind of looks like an exhaust piece that someone took a saw to to let the stove pipe fit something.

11-05-2021, 10:21 AM	#3
THI Active Member Join Date: Jan 2017 Location: Traverse City, MI Posts: 195	Re: Anyone recognize this part? The long curved one is a small block manifold to air cleaner heat stove for the "low dump" log manifolds

11-06-2021, 11:10 PM	#6
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,457	Re: Anyone recognize this part? Looks like described above to me, albeit not as curved. Attached Images __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

11-06-2021, 11:57 AM	#7
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: Anyone recognize this part? Looks like what I still have on my '83, the riser pipe from passenger manifold up to snorkel on air cleaner pan. __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.