roll bar mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 01-04-2004, 09:54 PM

Where do your aftermarket or delaer installed roll bars mount on rear points? Ontop of fenders tubs or behind? I'm almost certain the smittybuilt bar mounts to floor behind wheel tub but how about the early ones?

Anyone know good supplier for smittybuilt roll bar and front cage kit?

SteedaLX · 01-05-2004, 10:37 AM

I called smitybilt and they told me they do not make the roll bar for these years anymore...you can buy the cage kit though.

Dan72cst · 01-05-2004, 04:11 PM

My stock roll bar mounts on the forward slant of the wheel well, but thought there were a couple styles of stock bars and the other style mounts on top of the wheel well. Hope I'm remembering correctly.

cheyenne10 · 01-05-2004, 05:00 PM

Dan do you have a picture or 2 to post or email? If I'm reading it right the distance between front hoop and rear down points are not too far apart on yours.

mister.freeze · 01-05-2004, 05:01 PM

My FACTORY rollbar mounted behind the wheelwells, but was bent up slightly to follow the wheelwell; 2 bolts in the floor and 2 in the well. I shortened it to mount on top of the well, it gave me room for the spare behind the well.

Dan72cst · 01-06-2004, 11:14 AM

Its not letting me post them, so I sent an e-mail. Dan

01-04-2004, 09:54 PM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	roll bar mounting Where do your aftermarket or delaer installed roll bars mount on rear points? Ontop of fenders tubs or behind? I'm almost certain the smittybuilt bar mounts to floor behind wheel tub but how about the early ones? Anyone know good supplier for smittybuilt roll bar and front cage kit? __________________ Bob

01-05-2004, 10:37 AM	#2
SteedaLX Registered User Join Date: Oct 2003 Posts: 64	I called smitybilt and they told me they do not make the roll bar for these years anymore...you can buy the cage kit though. __________________ 1971 GMC Jimmy 6" Superlift w/ 35" tires Chattanooga, TN

01-05-2004, 04:11 PM	#3
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	My stock roll bar mounts on the forward slant of the wheel well, but thought there were a couple styles of stock bars and the other style mounts on top of the wheel well. Hope I'm remembering correctly. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

01-05-2004, 05:00 PM	#4
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	pictures? Dan do you have a picture or 2 to post or email? If I'm reading it right the distance between front hoop and rear down points are not too far apart on yours. __________________ Bob

01-06-2004, 11:14 AM	#6
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	PICTURES Its not letting me post them, so I sent an e-mail. Dan __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400 Last edited by Dan72cst; 01-06-2004 at 08:49 PM.

01-05-2004, 05:01 PM	#5
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	My FACTORY rollbar mounted behind the wheelwells, but was bent up slightly to follow the wheelwell; 2 bolts in the floor and 2 in the well. I shortened it to mount on top of the well, it gave me room for the spare behind the well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.