Front Fender Measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twoskies · 12-15-2022, 08:25 AM

Morning
1966 Chevy C10
got 3 front fenders, 2 driver and 1 passenger, both driver fenders measure 23 3/4 top to bottom, passenger fender measures 24
Anyone got a good oem fender to compare

Picture to show where im measuring

Thanks

SkinnyG · 12-15-2022, 11:41 AM

I don't have an answer for you, as my fenders are back on.

I wouldn't be surprised if those measurements are fine. These trucks are drunk, and not even symmetrically drunk right from the factory. (grin)

twoskies · 12-15-2022, 01:11 PM

Yeah. I kinda figured. I can split the difference when I’m installing. But wanted to know if anyone had checked
Thought it might make a difference when putting back together as far as alignment
Thanks
Posted via Mobile Device

twoskies · 12-18-2022, 04:09 AM

Thank You SkinnyG

Anyone else got any measurements, i know when i goto align everything before paint (gonna be awhile, lol) i can split the difference on the rocker and split the rocker a slight bit to compensate for the difference so the upper alignment might be a little closer, or by the time i get there maybe it will be close anyway, Thanks

12-15-2022, 08:25 AM	#1
twoskies Registered User Join Date: Aug 2015 Location: kokomo,indiana Posts: 336	Front Fender Measurements Morning 1966 Chevy C10 got 3 front fenders, 2 driver and 1 passenger, both driver fenders measure 23 3/4 top to bottom, passenger fender measures 24 Anyone got a good oem fender to compare Picture to show where im measuring Thanks Attached Images __________________ A Little Better Every Day Cancer Survivor, most dont know what they have until its gone, appreciate everything Last edited by twoskies; 12-15-2022 at 08:27 AM. Reason: add

12-15-2022, 11:41 AM	#2
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,267	Re: Front Fender Measurements I don't have an answer for you, as my fenders are back on. I wouldn't be surprised if those measurements are fine. These trucks are drunk, and not even symmetrically drunk right from the factory. (grin) __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

12-15-2022, 01:11 PM	#3
twoskies Registered User Join Date: Aug 2015 Location: kokomo,indiana Posts: 336	Re: Front Fender Measurements Yeah. I kinda figured. I can split the difference when I’m installing. But wanted to know if anyone had checked Thought it might make a difference when putting back together as far as alignment Thanks Posted via Mobile Device

12-18-2022, 04:09 AM	#4
twoskies Registered User Join Date: Aug 2015 Location: kokomo,indiana Posts: 336	Re: Front Fender Measurements Thank You SkinnyG Anyone else got any measurements, i know when i goto align everything before paint (gonna be awhile, lol) i can split the difference on the rocker and split the rocker a slight bit to compensate for the difference so the upper alignment might be a little closer, or by the time i get there maybe it will be close anyway, Thanks __________________ A Little Better Every Day Cancer Survivor, most dont know what they have until its gone, appreciate everything



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.