The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-19-2022, 11:39 PM   #1
Mr3Speed
Registered User
 
Join Date: Apr 2018
Location: Valley Center, California
Posts: 12
Likuid Kreations DBW pedal mount

The Likuid Kreations DBW pedal mount for the early truck DBW pedal is great. Fits in my 69 c10 functionally perfect from 0% to 100% throttle. BUT they pedal ends up maybe 2 inches lower than what looks to be level with the brake pedal and maybe 1 1/2 further right than original. I'll attach a picture on this thread tomorrow. The original floor mount pedal has those two little nubs that hold it to the floor just had to unscrew those because my pedal ended up getting stuck wide open on one. Hope this helps someone doing a DBW LS swap
Mr3Speed is offline   Reply With Quote
Old 12-20-2022, 09:39 AM   #2
Grumpy old man
Senior Member
 
Grumpy old man's Avatar
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
Re: Likuid Kreations DBW pedal mount

__________________

1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
Grumpy old man is offline   Reply With Quote
Old 12-20-2022, 10:50 AM   #3
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Likuid Kreations DBW pedal mount

This thread is worthless without defining what a DBW is

__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 12-20-2022, 11:28 AM   #4
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
Re: Likuid Kreations DBW pedal mount

Quote:
Originally Posted by special-K View Post
This thread is worthless without defining what a DBW is


Moved to LSx Swaps. They will know what a DBW is....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 12-20-2022, 01:18 PM   #5
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Likuid Kreations DBW pedal mount

Just bought one today - will post pics when I mount it !!
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 12-20-2022, 02:49 PM   #6
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: Likuid Kreations DBW pedal mount

Tim, DBW= drive by wire , its the electric gas pedal instead of the BDC which is drive by cable
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 12-20-2022, 02:56 PM   #7
Joyridin
Registered User
 
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 556
Re: Likuid Kreations DBW pedal mount

Pretty useless without knowing which version and which pedal. I had one from a different company with a COrvette pedal. It looked exactly like all of these. I ended up chucking it and made one of my own.
Joyridin is offline   Reply With Quote
Old 12-20-2022, 08:09 PM   #8
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: Likuid Kreations DBW pedal mount

lol, design fail.... i don't see a easy way to screw in the 3rd screw for the firewall.

I whipped up a drawing in cad and printed it, stuck it on 3/4 MDF wood scrap for temporary mockup as the bracket in steel would be the same offset in thickness for a 2016 style accelerator pedal.... yeah, 3 years later that MDF still good to go.

Ill put up a drawing of it and some pictures later on. put the pedal exactly in the same location as factory 87 pedal. Could make them out of steel and sell them but not sure since there's others out there that make em

Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 12-20-2022, 10:47 PM   #9
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: Likuid Kreations DBW pedal mount

When I did the last build for a local forum member, an 86 c-10 we tried the 96 style c/k turbo diesel pedal.. 100% bolt on and looked amazing, just didn't have the right guts inside... maybe it was good for LS swaps but not for LT.... LT the pedal values were exactly opposite if I remember correctly.

Next pedal I researched was an 08 maybe Impala pedal. Ended up the right values and operated as expected, but pedal angle was not even close for a c-10. Wound up making a firewall adapter out of 3/8 aluminum plate + pedal rod to pedal pad adapter out of sheet metal that goes where the pedal pivot and spring for the pedal just to get the angle of stock c-10 pedal just right.



Removed the tiny Impala pedal and swapped in the factory c-10... looked and more importantly felt right (and matched factory pedal placement)

I never made a rendering of the 2016 silverado pedal bracket.... fiddling with it now and then will post picture later.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 12-21-2022, 10:01 AM   #10
Joyridin
Registered User
 
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 556
Re: Likuid Kreations DBW pedal mount

Quote:
Originally Posted by 87chevy.com View Post
When I did the last build for a local forum member, an 86 c-10 we tried the 96 style c/k turbo diesel pedal.. 100% bolt on and looked amazing, just didn't have the right guts inside... maybe it was good for LS swaps but not for LT.... LT the pedal values were exactly opposite if I remember correctly.

Next pedal I researched was an 08 maybe Impala pedal. Ended up the right values and operated as expected, but pedal angle was not even close for a c-10. Wound up making a firewall adapter out of 3/8 aluminum plate + pedal rod to pedal pad adapter out of sheet metal that goes where the pedal pivot and spring for the pedal just to get the angle of stock c-10 pedal just right.



Removed the tiny Impala pedal and swapped in the factory c-10... looked and more importantly felt right (and matched factory pedal placement)

I never made a rendering of the 2016 silverado pedal bracket.... fiddling with it now and then will post picture later.
I did the same. Bought one similar tot he ones he has pictured and the pedal was 2" higher than factory. He reworked the bracket, but it was still too high. I just used a flat piece of steel and drilled mounting holes. I had to chop the Corvette pedal shorter by 2", but it works great now and looks factory.
Joyridin is offline   Reply With Quote
Old 12-30-2022, 04:22 AM   #11
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,881
Re: Likuid Kreations DBW pedal mount

The Corvette DBW pedal mount I got for my 72 from Hart_rod here on the board seems like it will work well. https://67-72chevytrucks.com/vboard/...d.php?t=631165 Remember seeing something that bracket will fit early and late model 67-72 later in the thread. The Corvette DBW pedal is identical to the trucks. The Cheyenne super chrome trim even fits on it, factory or reproduction. He also has one for the truck pedals. Listed in the same forum.
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

Last edited by Richard; 12-30-2022 at 04:32 AM.
Richard is offline   Reply With Quote
Old 12-30-2022, 08:24 AM   #12
Joyridin
Registered User
 
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 556
Re: Likuid Kreations DBW pedal mount

Quote:
Originally Posted by Richard View Post
The Corvette DBW pedal mount I got for my 72 from Hart_rod here on the board seems like it will work well. https://67-72chevytrucks.com/vboard/...d.php?t=631165 Remember seeing something that bracket will fit early and late model 67-72 later in the thread. The Corvette DBW pedal is identical to the trucks. The Cheyenne super chrome trim even fits on it, factory or reproduction. He also has one for the truck pedals. Listed in the same forum.
That pedal looks nice. The one I have for a Corvette is a lot longer and is from a newer model.
Joyridin is offline   Reply With Quote
Old 12-30-2022, 09:54 PM   #13
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
Re: Likuid Kreations DBW pedal mount

If anyone wants to send me a new 19417903 (c6 corvette) pedal to keep (rockauto the cheapest) I'll mock it up to fit like the original 73-87 pedal offset and send that person a bracket and then post the dimensions for anyone to make along with wiring diagram pinouts.

Ill also post the Impala pedal bracket dimensions that I used in the last build which required a sheet metal adapter to get the pedal angle to be the same angle as the 86, as well as the gen5 pedal bracket... but the corvette pedal might be better if the angle is more like stock. the Impala pedal was almost vertical if I remember correctly.

The gen5 truck pedal fits well with the bracket, just doesn't look stock but you get use to it, but if its all you have or thats what came with your engine swap it works and doesnt look bad, just not stock

advice/info on fabing brackets

for anyone wanting to make a bracket or some sort but doesnt know how or where to start...
The way I approach making anything: grab harbor freight dial calipers, measure, measure again, close? .. pretty close? no, re measure,... pretty close? yes then draw them in a cad program, sprayed adhesive spray on the print and material.. usually MDF or acrylic depending on thickness that would be ideal, cut it, drilled it as its super easy to work with. Then check work, did it fit, up down, left right - update sketch, repeat.

clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress

Last edited by 87chevy.com; 12-30-2022 at 10:07 PM.
87chevy.com is offline   Reply With Quote
Old 01-01-2023, 12:14 AM   #14
Mr3Speed
Registered User
 
Join Date: Apr 2018
Location: Valley Center, California
Posts: 12
Re: Likuid Kreations DBW pedal mount

Finally figured out how to upload pictures :/
Attached Images
  

Last edited by LockDoc; 01-03-2023 at 11:03 PM. Reason: Rotate Pictures
Mr3Speed is offline   Reply With Quote
Old 01-01-2023, 11:42 AM   #15
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Likuid Kreations DBW pedal mount

Happy new year with new pedal install !!
Attached Images
  
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years

Last edited by LockDoc; 01-03-2023 at 11:07 PM. Reason: Rotate Pictures
6600DURAMAX is offline   Reply With Quote
Old 01-01-2023, 11:43 AM   #16
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Likuid Kreations DBW pedal mount

can someone explain the picture rotation to me ........ some upload correct and some do this
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 01-03-2023, 11:44 PM   #17
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
Re: Likuid Kreations DBW pedal mount

Quote:
Originally Posted by 6600DURAMAX View Post
can someone explain the picture rotation to me ........ some upload correct and some do this
I don't take pictures with my phone to post on here but here is a thread that was posted on the problem.....

https://67-72chevytrucks.com/vboard/...d.php?t=743225

May not correct it for everyone.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-05-2023, 10:30 PM   #18
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,881
Re: Likuid Kreations DBW pedal mount

Quote:
Originally Posted by 6600DURAMAX View Post
can someone explain the picture rotation to me ........ some upload correct and some do this
While I take pics with the phone I never upload from it. Download pics to computer, open each pic with paint. Can rotate, crop, etc or change nothing. Then save the pic. This seems to align pics correctly no matter how phone was oriented when pic was taken. I always use preview post to check before posting. You can also go back later and remove pics from the post and add pics using the edit feature.
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746
Richard is offline   Reply With Quote
Old 01-05-2023, 09:33 PM   #19
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Likuid Kreations DBW pedal mount

Great, I'll need to remember that.... however it goes against everything my wife has every told me about taking pics .....hahah
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 01-05-2023, 09:34 PM   #20
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Likuid Kreations DBW pedal mount

Pedal mount fit great - highly recommend it
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 01-05-2023, 11:09 PM   #21
Accelo
Senior Member
 
Accelo's Avatar
 
Join Date: Mar 2015
Location: washington
Posts: 2,296
Re: Likuid Kreations DBW pedal mount

It's not obvious how to post pictures.
Unless you are the originator of the posting you will have to hit reply and then go to the advanced button (Next to the quick reply button at the bottom of the dialog box). to find the button to add pictures.

One might guess it's the square box with the mountains in it. That may be a hold over from the old days when people used picture hosting sites. I use the paper clip and pick from the pictures on my PC. Typically downloaded from my phone and then uploaded to my PC from the cloud for posting.

My phone is just too small, for my eyes, to do it directly from it.
Cheers.
Attached Images
  
Accelo is offline   Reply With Quote
Reply

Bookmarks

Tags
dbw, holley terminator x, location, ls swap, pedal


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com