Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-06-2004, 02:33 AM | #1 |
Registered User
Join Date: Nov 2003
Location: Phx, AZ
Posts: 18
|
Fleetside Rear Bumper Question
Does anyone know what rear bumper this is?
I found the pic on the net. I guess there is some difference between the 60-62 and the 63-66 rear fleetside bumpers. Can anyone expain the differences to me? I have a '58 fleetside I would like to install that bumper on, and I would like to know what all is involved. Thx, Lee |
01-07-2004, 11:39 PM | #2 |
Registered User
Join Date: Nov 2002
Location: Cape Coral, FL
Posts: 35
|
Lee, Since the '60-'62 and '63-'66 trucks used a different frame the mounting points are what the difference is. You'll find the bolt holes are a couple of inches out of sync from one frame to the other. Also the earlier trucks used forged brackets, and on the later trucks they were stamped, but not certain if that would make any difference. Both front and rear bumpers are pulled off my '61 now, let me know if you need some measurements to compare with yours. My guess would be that you need a bumper from the earlier years to fit your '58 frame. Tony
__________________
1961 Chevy Apache 10 SWB fleet, 1970 GMC 1500 SWB fleet(getting 6.2L Detroit turbo Diesel), 1994 Chevy 3500 Crew Cab Dually 4X4 6.5L turbo Diesel. 1990 Chevy class "C" RV on G van chassis. Pics at www.picturetrail.com/yachtcare |
01-12-2004, 02:30 PM | #3 |
Registered User
Join Date: Nov 2003
Location: Phx, AZ
Posts: 18
|
Does anyone know what the frame width measurments between the different years? Thanks Tony
-Lee |
01-13-2004, 01:10 AM | #4 |
Registered User
Join Date: Nov 2002
Location: Cape Coral, FL
Posts: 35
|
Lee, According to the assembly manual frame width 60-62 at rear frame end 41.72", 63-66 is 41.82". Not much difference. Putting the tape to my frame (61) I get 41.75". The bumper brackets are bolted to the frame rails and are set outward 14" for the outer mount hole and straight behind the frame rail for the inner. The mounting holes in the brackets are slotted .75" for adjustment R to L. The ends of the brackets are 9" behind the frame rail end at the top corner of the inner bracket. Center of mounting holes on each bracket is 14". I'm thinking the fit of the bumper is all determined by which brackets you use, provided your rear frame width is the same, or within .75 inches, of the later trucks. [IMG]Jan12232[/IMG]
__________________
1961 Chevy Apache 10 SWB fleet, 1970 GMC 1500 SWB fleet(getting 6.2L Detroit turbo Diesel), 1994 Chevy 3500 Crew Cab Dually 4X4 6.5L turbo Diesel. 1990 Chevy class "C" RV on G van chassis. Pics at www.picturetrail.com/yachtcare |
01-20-2004, 10:59 PM | #5 |
Registered User
Join Date: Jan 2004
Location: Oklahoma
Posts: 1,057
|
isnt that truck a 58 or 59 gmc fleetside, not a 60-66?
__________________
Youth soon passes away, but immaturity can last a life time. |
02-04-2004, 03:21 PM | #6 |
Registered User
Join Date: Nov 2003
Location: Phx, AZ
Posts: 18
|
This is a 58-59 fleetside, but the factory bumper looks gross. The 60-66 bumper looks much cleaner.
|
02-18-2004, 09:52 PM | #7 |
Registered User
Join Date: Feb 2004
Location: Dauphin , Manitoba , Canada
Posts: 10
|
Rear Bumper
The bumper in the picture looks identical to the one I removed from my '59 GMC. Have the brackets and the bumper ( needs rechroming ) available since have decided on something else for the rear of my truck. Let me know if interested . Bob
|
02-20-2004, 06:00 PM | #8 |
Registered User
Join Date: Feb 2003
Location: Arkansas
Posts: 34
|
60-66 rear bumpers are the same for the fleetside. The bumper
brackets are where they differ, 60-62 are different than 63-66. Hope this helps.
__________________
64 Chevy pickup tilt,pb, ps discs up front 350/TH350, 72 rearend auto meter gauges 93 GMC extended cab trailmaster conversion |
02-25-2004, 06:26 PM | #9 |
Registered User
Join Date: Feb 2003
Location: Arkansas
Posts: 34
|
ooops, correction 60-62 and 63-66 bumpers are different,
looked at my parts book wrong. The 60-66 stepsides are the same.
__________________
64 Chevy pickup tilt,pb, ps discs up front 350/TH350, 72 rearend auto meter gauges 93 GMC extended cab trailmaster conversion |
03-03-2004, 03:17 PM | #10 |
"Treasure the Ride"
Join Date: Nov 2001
Location: Mid Michigan, Harrison Michigan, USA
Posts: 682
|
58-59 Hard to find
Lee,
I sell New Chrome Reproduction bumpers (with the drop down center - for the license plate viewing) for Chevy and GMC. The years for Fleetside are shown as 1960-1962 and 1963-1966. I also sell new reproduction Stepside rear bumpers in painted and chrome finish for 1955 (2nd series) through 1959. Sorry - no new reproduction rear bumpers listed for 1958-1959 Fleetsides. PS: If it is a 58-59 rear bumper you are needing, then I would email Cdn.Fleetside59 as from the sounds of it he has what you are looking for? my 2-cents worth...rico_bob
__________________
If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com Last edited by rico_bob; 03-03-2004 at 03:21 PM. |
Bookmarks |
|
|