|
02-20-2023, 06:27 PM | #1 |
Old and crusty
Join Date: Jan 2009
Location: Surprise, AZ
Posts: 462
|
LS coil packs
I run a 5.3 Vortec in my 64 C10 and want to know if I can run LS3 coil packs instead of the stock ones.
I wanted to buy a set of the Holley valve covers that hide the coil packs but my coil packs will not work with them. Anyone got a clue?
__________________
65 Chevy long wide daily driver - SOLD! 64 Chevy Short Step LS |
02-28-2023, 10:26 AM | #2 |
Registered User
Join Date: Apr 2013
Location: Olathe KS
Posts: 156
|
Re: LS coil packs
As long as the harness side plugs are the same (I believe they should be, but not 100% certain) they should just be plug and play. Depending how far back your engine is sitting you may have clearance issues on the passenger rear corner though.
__________________
14 Silverado- 4/6 drop daily 66 GMC short wide Custom Cab- building to be low and cruise. 4.8/t56 swap occurring now. Stupid low static drop 66 GMC 1 ton stepside looooong bed- the tow pig/work truck. |
04-10-2023, 04:03 PM | #3 |
Registered User
Join Date: Jan 2016
Location: Casper, WY
Posts: 9
|
Re: LS coil packs
https://www.ebay.com/itm/32544613889...mis&media=COPY
This set of harnesses have the correct coil terminals for the coils. https://www.amazon.com/dp/B0BBGQ8QSW...roduct_details These are the coils that fit the holley valve covers. |
04-10-2023, 09:22 PM | #4 |
Old and crusty
Join Date: Jan 2009
Location: Surprise, AZ
Posts: 462
|
Re: LS coil packs
Thanks for the info.
__________________
65 Chevy long wide daily driver - SOLD! 64 Chevy Short Step LS |
04-10-2023, 11:24 PM | #5 |
Senior Member
Join Date: Sep 2020
Location: Kila mt
Posts: 445
|
Re: LS coil packs
I had to modify the mounts on my edelbrock coil cover to accept ls2 coils, the ones I have were designed for ls1 coils….
Unfortunately I don’t have a picture of the actual coils, this is the cover however…. |
Bookmarks |
|
|